Sony KDL-32EX707 / KDL-40EX707 / KDL-46EX707 / KDL-52EX707 Service Manual ▷ View online
KDL-32EX707/40EX707/46EX707/52EX707
20
SERVICE ADJUSTMENTS
2-1-2. USING THE REMOTE COMMANDER TO VIEW OR
CHANGE SERVICE DATA
Use the buttons on the Remote Commander to access the Service
Menu items and adjust the Data Values.
Menu items and adjust the Data Values.
DISPLAY
Channel
Volume
+
POWER
4. To change the Category,
press
2
to move to the Next Category or
press
5
to go back to the Previous Category.
Note: Pressing
2
or
5
only changes the Categories within
the Service Menu displayed.
5. To change the adjustment item,
press
1
to move to the Next Item or
4
to go back to the Previous Item.
6. To change the Data Value,
press
3
to increase the Data Value or
6
to decrease the Data Value.
7. Press
MUTING then press
0
to Write the changes.
8. To exit service mode, press HOME or turn the TV power off.
2-2. ADJUSTMENTS AFTER REPLACING THE BAL BOARD
OR THE LCD PANEL
The following procedures must be completed after replacing the BAL
Board or the LCD panel.
Board or the LCD panel.
Update the TV to the latest software version
Select the Model
Select the Destination
Verify model and panel information are correct
Reconnect all cables
2-2-1. UPDATING THE SOFTWARE
After replacing the BAL Board or the LCD Panel, you must update the
software to the latest version.
software to the latest version.
Before you begin
Disconnect all cables (RF, External input, Ethernet, etc.) from
the TV
the TV
Instructions for updating the software are included with the software
package. After completing the software update, proceed to “Selecting the
Model”.
package. After completing the software update, proceed to “Selecting the
Model”.
KDL-32EX707/40EX707/46EX707/52EX707
21
SERvICE ADjUSTMENTS
2-2-2. SElECTING THE mODEl
After replacing the bAl board or lCD Panel, go into Service mode to set
the model data value.
1. TV must be in standby mode. (Power off).
2. Access Service Mode.
2. Access Service Mode.
Press the following buttons on the Remote Commander
within a second of each other:
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
3. Display the
DIGITAl Service menu.
NOTE: There are 3 Service Menus for this model, DIGITAL,
CHASSIS, and SUB. If the DIGITAL Service Menu is
not displayed, press
CHASSIS, and SUB. If the DIGITAL Service Menu is
not displayed, press
JUmP or OPTIONS on the Remote
Commander.
DIGITAL
SERVICE
001 OP
000 VERS
000 VERS
---
<MAIN>
<SUB>
DM1.301J00AA
SM1.010W00AA
M2.105C
SB1.000W00AA
DD1.016J00AA
SD1.010 W00AA
(DM1.3 01J00AA)
RF01.05
WP00.521J00AA
ID1C117081
WF:2.0.0.99
<BEM>
WF:0B
BM1.012W00LU
Camera FW
BB1.000W00LU
Camera FW
BD1.011J46LUX
---.---------
---.---------
ID25C73683
PID506A0000
PID506A0000
LTY550HJ01
4. Press
2
to move to the
002 mODEl (Next) category.
DIGITAL
SERVICE
002 MODEL
000 SEG
01 : 3a-2
5. Using the table, press
3
to increase the data value or
6
to decrease the data value, to match the model of the TV.
Chassis
Model Name
Data Value
Code
Name
AZ1-L
KDL-32EX707
10
3a-0
AZ1-L
KDL-40EX707
10
3a-0
AZ1-L
KDL-46EX707
10
3a-0
AZ1-L
KDL-52EX707
10
3a-0
DIGITAL
SERVICE
002 MODEL
000 SEG
10: 3a-0
Data Value
Code Name
6. Proceed to “Selecting the Destination”.
KDL-32EX707/40EX707/46EX707/52EX707
22
SERvICE ADjUSTMENTS
2-2-3. SElECTING THE DESTINATION
After replacing the bAl board or the lCD Panel, the destination location
must be set.
CAUTION: Selecting the incorrect destination may requiring replacing the
bAl board.
DIGITAL
SERVICE
002 MODEL
000 SEG
13 : 3a-2
7. Press
1
to move to “001 DEST” sub Category.
DIGITAL
SERVICE
002 MODEL
001 DEST
03: UC (UC grp)
8. Using the table, press
3
to increase the data value or
6
to decrease the data value, to select the destination of the
TV.
GROUP
DESTINATION
CODE
DATA
VALUE
DESTINATION
TW
6
TAIWAN
CO
21
COLOMBIA
TW grp
DIGITAL
SERVICE
002 MODEL
001 DEST
21: CO (TW grp)
Data Value
Destination
CAUTION: Verify the DESTINATION is set correctly before
proceeding to the next step. If another destination Data
Value is selected, it may possibly corrupt the software which
would require a BAL Board replacement.
proceeding to the next step. If another destination Data
Value is selected, it may possibly corrupt the software which
would require a BAL Board replacement.
9. After verifying the correct destination data value displays,
press
0
to save (Write) the changes.
10. Exit Service Mode by pressing
HOmE or
turn the TV power off.
11. Proceed to “Verifying the Model and Panel Information”.
2-2-4. vERIFyING THE mODEl AND PANEl INFORmATION
After saving the changes to the service data, verify the information.
1. TV must be in standby mode. (Power off).
2. Access Service Mode.
2. Access Service Mode.
Press the following buttons on the Remote Commander
within a second of each other:
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
3. Display the
DIGITAl Service menu.
NOTE: There are 3 Service Menus for this model, DIGITAL,
CHASSIS, and SUB. If the DIGITAL Service Menu is
not displayed, press
CHASSIS, and SUB. If the DIGITAL Service Menu is
not displayed, press
JUmP or OPTIONS on the Remote
Commander.
KDL-32EX707/40EX707/46EX707/52EX707
23
SERvICE ADjUSTMENTS
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<SUB>
DM1.301J00AA
SM1.010W00AA
M2.105C
SB1.000W00AA
DD1.016J00AA
SD1.010W00AA
(DM1.3 01J00AA)
RF01.05
WP00.521J00AA
ID1C117081
ID2577330E
PID54520000
WF:2.0.0.99
<BEM>
WF:0B
BM1.012W00LU
Camera FW
BB1.000W00LU
Camera FW
BD1.011J46LUX
---.---------
LK320D3LEDE120
Model ID
Product ID
Panel
Code
4. Using the table, verify the Model ID and the Product ID
match the information in the Service Menu.
Model Name MoDEl ID Product ID
Panel ID
Code
Name
KDL-32EX707 2577330E
54520000 LK320D3LEDE120
3a-0
KDL-32EX707 2577330E
54520000
LK315D3LA4S
3a-0
KDL-32EX707 2577330E
54520000 LK320D3LEDE120
3a-0
KDL-32EX707 2577330E
54520000
LK315D3LA4S
3a-0
KDL-40EX707 2577331B
54520000 LK400D3LEDE120
3a-0
KDL-40EX707 2577331B
54520000
LK400D3LA4S
3a-0
KDL-40EX707 2577331B
54520000
LK400D3LA4T
3a-0
KDL-40EX707 2577331B
54520000 LK400D3LEDE120
3a-0
KDL-40EX707 2577331B
54520000
LK400D3LA4S
3a-0
KDL-40EX707 2577331B
54520000
LK400D3LA4T
3a-0
KDL-46EX707 2577331C
54520000 LK460D3LEDE120
3a-0
KDL-46EX707 2577331C
54520000
LK460D3LA8S
3a-0
KDL-46EX707 2577331C
54520000
LK460D3LA8T
3a-0
KDL-46EX707 25773326
54520000
LTY(Z)460HJ02
3a-0
KDL-46EX707 2577331C
54520000 LK460D3LEDE120
3a-0
KDL-46EX707 2577331C
54520000
LK460D3LA8S
3a-0
KDL-46EX707 2577331C
54520000
LK460D3LA8T
3a-0
KDL-46EX707 25773326
54520000
LTY(Z)460HJ02
3a-0
KDL-52EX707 2577331D
54520000 LK520D3LEDE120
3a-0
KDL-52EX707 2577331D
54520000
LK520D3LB1S
3a-0
KDL-52EX707 2577331D
54520000 LK520D3LEDE120
3a-0
KDL-52EX707 2577331D
54520000
LK520D3LB1S
3a-0
5. Exit Service Mode by pressing
HOmE or turn the TV power
off.
6. Proceed to “Reconnecting All Cables”.
2-2-5. RECONNECTING All CAblES
After completing the changes to service mode, reconnect all the cables
(RF, External input, Ethernet, etc.) to the Tv then verify the Tv set picture.
If necessary, proceed to “White balance Adjustments”.
Click on the first or last page to see other KDL-32EX707 / KDL-40EX707 / KDL-46EX707 / KDL-52EX707 service manuals if exist.