Sony KDL-32EX40B / KDL-40EX40B Service Manual ▷ View online
KDL-32EX40B/40EX40B
24
SERVICE ADJUSTMENTS
DIGITAL
SERVICE
002 MODEL
001 DEST
001 DEST
03: UC (UC grp)
Data Value
Destination
CAUTION: Verify the DESTINATION is set correctly before
proceeding to the next step. If another destination Data
Value is selected, it may possibly corrupt the software which
would require a BAL Board replacement.
9. After verifying the destination data value displays,
press
0
to save (Write) the changes.
10. Exit Service Mode by pressing HOME or
turn the TV power off.
11. Proceed to “Verifying the Model and Panel Information”.
2-2-4. VERIFYING THE MODEL AND PANEL INFORMATION
After saving the changes to the service data, verify the information.
1. TV must be in standby mode. (Power off).
2. Access Service Mode.
Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
3. Display
the
DIGITAL Service Menu.
NOTE: There are 3 Service Menus for this model, DIGITAL,
CHASSIS, and SUB. If the DIGITAL Service Menu is
not displayed, press JUMP or OPTIONS on the Remote
Commander.
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<SUB>
DM1.301J00AA
SM1.010W00AA
M2.105C
SB1.000W00AA
DD1.016J00AA
SD1.010W00AA
(DM1.3 01J00AA)
RF01.05
WP00.521J00AA
ID1C117081
ID
PID
WF:2.0.0.99
<BEM>
WF:0B
BM1.012W00LU
Camera FW
BB1.000W00LU
Camera FW
BD1.011J46LUX
---.---------
Model ID
Product ID
Panel
Code
Code
A5973189
0C620000
LTY(Z)320HM01
4. Using the table, verify the Model ID and the Product ID
match the information in the Service Menu.
KDL-32EX40B/40EX40B
25
SERVICE ADJUSTMENTS
Model Name
Model ID
Product ID
Panel ID
Code
Name
KDL-32EX40B
A5973189
0C620000
LTY(Z)320HM01
3a-BD
KDL-32EX40B
A5973189
0C620000
LTY(Z)320HM01
3a-BD
KDL-32EX40B
A5973195
0C620000
T315HW04 V0
3a-BD
KDL-32EX40B
A5973195
0C620000
T315HW04 V0
3a-BD
KDL-40EX40B
A5973197
0C620000
LTY(Z)400HM01
3a-BD
KDL-40EX40B
A5973197
0C620000
LTY(Z)400HM01
3a-BD
KDL-40EX40B
A5973198
0C620000
T400HW03 V0
3a-BD
KDL-40EX40B
A5973198
0C620000
T400HW03 V0
3a-BD
5. Exit Service Mode by pressing HOME or turn the TV power
off.
6. Proceed to “Reconnecting All Cables”.
2-2-5. RECONNECTING ALL CABLES
After completing the changes to service mode, reconnect all the cables
(RF, External input, Ethernet, etc.) to the TV then verify the TV set picture.
If necessary, proceed to “White Balance Adjustments”.
2-3. VIEWING THE BLU-RAY SERVICE MODE MENU
The Blu-Ray Service Mode Menu provides information about the Blu-ray
player.
1. TV must be in Standby Mode. (POWER off).
2. Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
NOTE: If the Digital Service Menu is not displayed, press
JUMP or OPTIONS .
3. Press
2
to move to “007 BD” Category.
DIGITAL
SERVICE
007 BD
000 SERVICE
000 SERVICE
- - -
Sample BD Service Menu
4. To view the Blu-ray service adjustment mode, press
0
or
ENT
.
NOTE: It may take a moment for the Blu-ray Service Mode
Menu to display.
*Service Mode Menu
[1] Diag
[2] Log
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
[7] EMC Test Mode
[8] Drive
[2] Log
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
[7] EMC Test Mode
[8] Drive
HELP: [DOWN] [ENT]
Sample Blu-ray Service Mode Menu
KDL-32EX40B/40EX40B
26
SERVICE ADJUSTMENTS
5. To select a Service Mode Menu option, do one of the
following:
a. Press the or until the item is highlighted, then press
a. Press the or until the item is highlighted, then press
.
OR
b. Press the corresponding number on the remote.
b. Press the corresponding number on the remote.
6. To exit out of the service menu option, press
RETURN
.
7. Exit Service Mode by pressing HOME or turn the TV power
off.
2-4. WHITE
BALANCE
ADJUSTMENTS
White Balance adjustment data is located on the Digital Service Menu.
1. TV must be in Standby Mode. (POWER off).
2. Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
NOTE: If the Digital Service Menu is not displayed, press
JUMP or OPTIONS .
3 Press
2
to move to “006 WB” Category.
DIGITAL
SERVICE
006 WB
000 WHITE_BALANCE ___
000 WHITE_BALANCE ___
4. Press
0
to enter White Balance Adjustment mode.
5. To select the White Balance Adjustment setting that needs to
be changed, do the following:
a. To select R_DRV, press
a. To select R_DRV, press
1
.
b. To select G_DRV, press
2
.
c. To select B_DRV, press
3
.
d. To select R_BKG, press
4
.
e To select G_BKG, press
5
.
f. To select B_BKG, press
6
.
6. After selecting the White Balance setting, press ENT to
display the edit screen.
The screen displays a “Please input WB items” message.
DIGITAL
SERVICE
WB
*1 R_DRV 128
*1 R_DRV 128
2 G_DRV 128
3 B_DRV 128
4 R_BKG 128
5 G_BKG 128
6 B_BKG 128
3 B_DRV 128
4 R_BKG 128
5 G_BKG 128
6 B_BKG 128
Please input WB items
(0 -255)
---
(0 -255)
---
Gain
0: x 0.5, 128: x 1, 255: x1.5
Offset
128: offset 0
7. Using the numbers buttons on the remote, enter the Data
Value for the White Balance setting (value must be between
1 and 255).
8. Press ENT to WRITE (save) the changes.
9. To exit White Balance Adjustment, press JUMP or OPTIONS
KDL-32EX40B/40EX40B
27
SERVICE ADJUSTMENTS
2-5. RESETTING THE TV TO FACTORY CONDITION
Use the following instructions to restore the User Adjustments
and Channel Memory settings to the preset factory conditions.
1. While holding down the on the Remote Commander,
press the POWER button on the TV Switch Unit of the set.
The set restarts and displays the Initial Setup screen. This
may take several minutes.
2-5-1. RESETTING THE TV TO FACTORY CONDITION USING
SERVICE MODE
1. TV must be in Standby Mode. (POWER off).
2. Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
.
3. If necessary, press JUMP or OPTIONS to go to DIGITAL
mode.
4. Press
8
.
“SERVICE” changes to green RST.
5. Press
MUTING .
RST executes the command and displays EXE.
6. Press
0
.
EXE-RST displays green, then red indicating the TV is
writing the data.
7. When the process is complete the green SERVICE text
displays and the LED display as shown below:
TIMER
Standby
POWER
TIMER
Standby
POWER
8. Cycle AC Power (Unplug and Plug AC Cord from the AC
Outlet).
9. The set restarts and displays the Initial Setup screen.
This may take several minutes.
Click on the first or last page to see other KDL-32EX40B / KDL-40EX40B service manuals if exist.