Sony KDL-32EX340 / KDL-32EX343 / KDL-42EX440 / KDL-42EX443 Service Manual ▷ View online
KDL-32EX340,343/42EX440,443(AEP/UK)
21
ADJUSTMENT
KDL-32EX340,343/42EX440,443(AEP/UK)
22
ADJUSTMENT
KDL-32EX340,343/42EX440,443(AEP/UK)
23
ADJUSTMENT
COMPLETING SERVICE REQUIREMENTS WHEN
REPLACING THE LCD PANEL
REPLACING THE LCD PANEL
The following must be performed after replacing the LCD Panel.
NOTE: The TCON Board for the KDL32EX340 model is internal and cannot
be replaced
be replaced
View the Status Information
Select the LCD Panel
Select the LCD Panel
1.
TV must be in Standby mode.
2.
Press the following buttons on the Remote Commander within a
second of each other:
second of each other:
DISPLAY
Channel
5
Volume
+
POWER
VIEWING THE STATUS INFORMATION
After replacing the LCD Panel or TCON Board you MUST UPDATE the
SOFTWARE to the latest version. Verify the latest software is installed
before proceeding to the service adjustments.
SOFTWARE to the latest version. Verify the latest software is installed
before proceeding to the service adjustments.
3.
For instructions refer to the section
4.
Do one of the following:
a.
If the latest software is installed, proceed to Selecting the
Panel ID Code.
Panel ID Code.
b.
If the latest software is not installed, update the software and
then proceed to Selecting the Panel ID Code.
then proceed to Selecting the Panel ID Code.
SELECTING THE PANEL ID CODE
CAUTION: You MUST SELECT THE CORRECT PANEL ID CODE for the
picture to display propertly.
picture to display propertly.
5. On
the
Service Mode, press
to select Panel Selection
Sound Adjustment
>>
Wide Band Tuning
>>
Range Scan…
>>
Self diagnosis history
>>
Status Information…
>>
LVDS Spectrum(%0)
<[
20
]>
DPMS
<[
Off
]>
Low of HPD
<[
5
]>
TVD_MCDONE_CNT
<[
20
]>
Demo Special
>>
Bypass AVI Info Detect
<[
On
]>
Panel Selection
<[ 19_LED_FHDCMI_42_NA ]>
UART Selection
CMI
SERIAL NUMBER EDIT
6100001
MODEL NAME EDIT
KDL-42EX440
[</>]Set [Home] Exit
Service Mode
Sound Adjustment
>>
Wide Band Tuning
>>
Range Scan…
>>
Self diagnosis history
>>
Status Information…
>>
LVDS Spectrum(%0)
<[
20
]>
DPMS
<[
Off
]>
Low of HPD
<[
5
]>
TVD_MCDONE_CNT
<[
20
]>
Demo Special
>>
Bypass AVI Info Detect
<[
On
]>
Panel Selection
<[ 19_LED_FHDCMI_42_NA ]>
UART Selection
CMI
SERIAL NUMBER EDIT
6100001
MODEL NAME EDIT
KDL-42EX440
[</>]Set [Home] Exit
Service Mode
KDL-32EX340,343/42EX440,443(AEP/UK)
24
ADJUSTMENT
6.
Using the table below, press the
or
on screen cursor
buttons to select the correct Panel Code for the Panel ID.
Model Name
Panel Code
Panel Type
Panel ID
KDL-42EX440
KDL-42EX443
KDL-32EX340
KDL-32EX343
KDL-32EX343
19_LED_FHD_CMI_42_NA
CMI
V420HJ1P02
V320BJ6P01
18_LED_WXGA_CMI_32_N CMI
7.
To save the changes, press
8.
Press
POWER
to turn off the TV.
9.
Press
POWER
to turn the TV back on to verify the picture
is displaying properly.
10. Proceed to Resetting the Panel Operation Time.
RESETTING PANEL OPERATION TIME
Follow the instructions to enter Self Check screen from section
11. On the Self Check screen, identify the Panel Operation Time
location.
12. Press
7
0
13. Verify Panel Operation Time has been changed to 00000.
14. To exit the Self Check, press
HOME
.
Back
<<
002
MAIN_ POWER
000
003
DC_ALERT1
000
003
AUDIO_PROT
000
004
BALANCER_ERR
000
005
TCON_ERR
000
005
PANEL_ID_NVM_ERR
000
006
BACKLIGHT_ERR
000
007
TEMP_ERR
000
00031
00046
00031
[Home] Exit
SELF CHECK
TOTAL OPERATION
TIME
BOOT COUNT
PANEL OPERATION
TIME
Back
<<
002
MAIN_ POWER
000
003
DC_ALERT1
000
003
AUDIO_PROT
000
004
BALANCER_ERR
000
005
TCON_ERR
000
005
PANEL_ID_NVM_ERR
000
006
BACKLIGHT_ERR
000
007
TEMP_ERR
000
00031
00046
00000
[Home] Exit
SELF CHECK
Click on the first or last page to see other KDL-32EX340 / KDL-32EX343 / KDL-42EX440 / KDL-42EX443 service manuals if exist.