Sony KDL-32BX355 / KDL-40BX455 Service Manual ▷ View online
KDL-32BX355/40BX455
21
SECTION 4 - DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
SECTION 4 - DISASSEMBLY/PART NUMBER INFORMATION
301
4-410-251-01
SUPPORT, PNL (APOT)
302
4-423-355-01
BEZEL (40APOT)
303
NA
LCD PANEL
FOR ALL LCD PANEL AND TCON BOARD PART NUMBER
INFORMATION REFER TO THE LCD PANELS SERVICE MANUAL.
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
○
4-159-298-01
SCREW, +PSW M4X10
302
303
301
Bracket,
PNL BTM
PNL BTM
FOR THE FOLLOWING SERIAL # RANGES:
KDL-40BX455: 9000001 - 9170000
C
B
A
LCD PANEL REMOVAL
NOTE: The Bracket Panel Bottom is not included with the LCD Panel and must be reattached to the replacement panel.
A Remove Panel Brackets from Bezel.
B Remove screws from Bracket Panel Bottom.
C Remove screws from LCD Panel to detach from Bezel, then carefully lift up LCD Panel.
CLEANING THE LCD PANEL
CAUTION: When cleaning the TV, be sure to unplug the power cord to avoid any chance of electric shock.
Clean the cabinet of the TV with a dry soft cloth, and wipe the LCD screen gently with a soft cloth.
;
Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water.
;
If using a chemically pretreated cloth, please follow the instruction provided on the package.
;
Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
;
Periodic vacuuming of the ventilation openings is recommended to ensure proper ventilation.
;
Do Not
use paper towels, any type of abrasive pad, rags, rubber or vinyl materials to clean the screen. Using these
materials could easily scratch the screen which may result in permanent damage.
;
Do Not
use any cleaning product containing alkaline/acid cleaner, scouring powder, or volatile solvent, such as alcohol,
ammonia, benzine, thinner or insecticide. Using any of these harsh cleaners may result in permanent damage to the
screen.
;
Do Not
spray water or detergent directly onto the TV screen. If liquid drips into the bottom of the screen it may cause a
failure.
KDL-32BX355/40BX455
22
SECTION 4 - DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
SECTION 4 - DISASSEMBLY/PART NUMBER INFORMATION
351
4-410-251-01
SUPPORT, PNL (32APOTC)
352
4-423-355-02
BEZEL (32APOT)
353
NA
LCD PANEL
FOR ALL LCD PANEL AND TCON BOARD PART NUMBER
INFORMATION REFER TO THE LCD PANELS SERVICE MANUAL.
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
△
2-580-640-01
SCREW, +BVTP2 4X16
○
4-159-298-01
SCREW, +PSW M4X10
●
2-580-592-01
SCREW, +PSW M3X8
352
353
351
MB Frames
Lwr Frame
Btm Frame
Upr
Frame
Frame
Lt Frame
Rt Frame
Double Sided
Tape
Tape
G
C
D
E
F
B
A
LCD PANEL REMOVAL
NOTE: The Panel Frames are not included with the LCD Panel and must be reattached to the replacement panel.
A Remove Panel Brackets from Bezel.
B Remove screws from Main Board Brackets.
C Remove screws from Upper Frame.
D Remove screws from Left and Right Frames.
E Remove screws from Bottom Frame.
F Remove screws from Lower Frame.
G Remove screws from LCD Panel to detach from Bezel, then carefully lift up LCD Panel.
CLEANING THE LCD PANEL
CAUTION: When cleaning the TV, be sure to unplug the power cord to avoid any chance of electric shock.
Clean the cabinet of the TV with a dry soft cloth and wipe the LCD screen gently with a soft cloth.
;
Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water.
;
If using a chemically pretreated cloth, please follow the instruction provided on the package.
;
Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
;
Periodic vacuuming of the ventilation openings is recommended to ensure proper ventilation.
;
Do Not
use paper towels, any type of abrasive pad, rags, rubber or vinyl materials to clean the screen. Using these
materials could easily scratch the screen which may result in permanent damage.
;
Do Not
use any cleaning product containing alkaline/acid cleaner, scouring powder or volatile solvent, such as alcohol,
ammonia, benzine, thinner or insecticide. Using any of these harsh cleaners may result in permanent damage to the
screen.
;
Do Not
spray water or detergent directly onto the TV screen. If liquid drips into the bottom of the screen it may cause a
failure.
FOR THE FOLLOWING SERIAL # RANGES:
KDL-40BX455: 9170001 - 9200000
KDL-32BX355/40BX455
23
SECTION 4 - DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
401
1-910-107-35
CONNECTOR ASSEMBLY 32 14P MB-PSU
402
1-910-105-34
(LVDS) CONNECTOR ASSEMBLY 32
403
1-910-106-04
CONNECTOR ASSEMBLY 32 4P MB-SP
404
1-910-106-05
CONNECTOR ASSEMBLY 32 12P MB-H&KEY
405
1-910-106-07
CONNECTOR ASSEMBLY 32 14P PSU-INV
152
153
154
155
151
CONNECTORS
KDL-32BX355 ONLY
FOR THE FOLLOWING SERIAL # RANGES:
KDL-32BX355: 9000001 - 9170000
FOR THE FOLLOWING SERIAL # RANGES:
KDL-32BX355: 9170001 - 9200000
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
451
1-910-107-35
CONNECTOR ASSEMBLY 32 14P MB-PSU
452
1-910-107-34
(LVDS) CONNECTOR ASSEMBLY 32
453
1-910-106-04
CONNECTOR ASSEMBLY 32 4P MB-SP
454
1-910-106-05
CONNECTOR ASSEMBLY 32 12P MB-H&KEY
455
1-910-106-07
CONNECTOR ASSEMBLY 32 14P PSU-INV
452
453
454
455
451
KDL-32BX355/40BX455
24
SECTION 4 - DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
P/N
DESCRIPTION
REMARKS
TOTAL
▲
2-580-608-01
SCREW, +PSW M5X16
TABLE-TOP STAND(3)
3
△
2-580-640-01
SCREW, +BVTP2 4X16
RC(9), SPKR-L(2), SPKR-R(2), PNL to BEZ(2)
13
●
2-580-592-01
SCREW, +PSW M3X8 *
RC TERMINAL AREA(1), A BOARD(4), G BOARD(6)
11
○
4-159-298-01
SCREW, +PSW M4X10 *
RC(5), AC CVR(1), UPR FRM(2), LT FRM(2), RT FRM(2), BTM FRM(2)
14
■
7-685-646-79
SCREW, +BVTP 3X8 *
VESA BRKTS(4), MB BRKTS(2)
6
P/N
DESCRIPTION
REMARKS
TOTAL
▲
2-580-608-01
SCREW, +PSW M5X16
TABLE-TOP STAND(3)
3
△
2-580-640-01
SCREW, +BVTP2 4X16
RC(9), SPKR-L(2), SPKR-R(2), PNL to BEZ(2)
13
●
2-580-592-01
SCREW, +PSW M3X8 *
RC TERMINAL AREA(1), A BOARD(4), G BOARD(6)
11
○
4-159-298-01
SCREW, +PSW M4X10 *
RC(5), AC CVR(1), BRKT TOP SIDE(2), BRKT FRM(2), LT FRM(2), RT FRM(2), BTM FRM(2)
16
■
7-685-646-79
SCREW, +BVTP 3X8 *
VESA BRKTS(4), MB BRKTS(2)
6
P/N
DESCRIPTION
REMARKS
TOTAL
▲
2-580-608-01
SCREW, +PSW M5X16
TABLE-TOP STAND(3)
3
△
2-580-640-01
SCREW, +BVTP2 4X16
RC(11), SPKR-L(2), SPKR-R(2), PNL to BEZ(2)
15
●
2-580-592-01
SCREW, +PSW M3X8 *
RC TERMINAL AREA(1), A BOARD(4), G BOARD(6)
11
○
4-159-298-01
SCREW, +PSW M4X10 *
RC(5), AC CVR(1), BTM FRM(3)
9
■
7-685-646-79
SCREW, +BVTP 3X8 *
VESA BRKTS(4), STND BRKTS(6)
10
P/N
DESCRIPTION
REMARKS
TOTAL
▲
2-580-608-01
SCREW, +PSW M5X16
TABLE-TOP STAND(3)
3
△
2-580-640-01
SCREW, +BVTP2 4X16
RC(11), SPKR-L(2), SPKR-R(2), PNL to BEZ(2)
15
●
2-580-592-01
SCREW, +PSW M3X8 *
RC TERMINAL AREA(1), A BOARD(4), G BOARD(5) BRKT PNL TOP(2), BRKT PNL BTM F(4), BRKT MB SIDE (2)
18
○
4-159-298-01
SCREW, +PSW M4X10 *
RC(5), AC CVR(1), BRKT PNL BTM(3), BRKT PNL TOP(2), BRKT MB SIDE (2), BRKT MB TOP(1)
14
■
7-685-646-79
SCREW, +BVTP 3X8 *
VESA BRKTS(4)
21
FOR THE FOLLOWING SERIAL # RANGES: KDL-32BX355: 9000001 - 9170000 (AUO PANEL)
FOR THE FOLLOWING SERIAL # RANGES: KDL-40BX455: 9000001 - 9170000 (AUO PANEL)
FOR THE FOLLOWING SERIAL # RANGES: KDL-32BX355: 9170001 - 9200000 (CMI PANEL)
FOR THE FOLLOWING SERIAL # RANGES: KDL-40BX455: 9170001 - 9200000 (CMI PANEL)
SCREWS
203
202
201
204
205
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
501
1-910-107-35
CONNECTOR ASSEMBLY 40 14P MB-PSU
502
1-910-105-33
(LVDS) CONNECTOR ASSEMBLY 40
503
1-910-106-08
CONNECTOR ASSEMBLY 40 4P MB-SP
504
1-910-106-09
CONNECTOR ASSEMBLY 40 12P MB-H&KEY
505
1-910-106-11
CONNECTOR ASSEMBLY 40 14P PSU-INV
KDL-40BX455 ONLY
*For detailed screw location on the LCD Panel, refer to
page 25
.
Click on the first or last page to see other KDL-32BX355 / KDL-40BX455 service manuals if exist.