Sony KDL-32BX311 Service Manual ▷ View online
KDL-32BX311
12
SECTION 2 - SOFTWARE REQUIREMENTS
EXAMPLES OF SOFTWARE CORRECTABLE
SYMPTOMS
Most symptoms that are correctable by software updates involve
communications issues with other devices or minor glitches in
the operation of a specific function. Below is a list of some of the
symptoms that may be corrected with a software update:
• Fluctuations in picture brightness
• Intermittent picture freezing or noise
• Problems with certain inputs (especially HDMI)
• Intermittent or distorted audio
• Erratic remote control operation
• Unit turns on and off by itself
• Loss of color
• Internet connectivity
• Certain features not working correctly
(photo or video file viewing)
KDL-32BX311
13
OVERVIEW
The primary circuits contained in the AZ2-UK chassis consists of a Main Board (designated as the A Board), Power Supply Board (designated
as the G13 Board), the IR Board (H Board), the Switch Unit and the LCD Panel Assembly which includes the TCON Board.
NOTE: For connector part number information, refer to
NOTE: For connector part number information, refer to
“Connectors” on page 34
. For Wire Dressing information, refer to
“Wire Dressing” on
page 35
.
G13
SWITCH UNIT
H
A
FIGURE 3-1. CIRCUIT BOARD LOCATION
SECTION 3 - CHASSIS OVERVIEW
KDL-32BX311
14
SECTION 3 - CHASSIS OVERVIEW
OVERALL CIRCUIT DESCRIPTION
“Figure 3-2. Block Diagram” on page 16
provides an
overview of the AZ2-UK chassis. Below is a description of the
components and their functions.
MAIN BOARD (A BOARD)
Common to all models utilizing the AZ2-UK chassis, the Main
Board (A Board) contains most of the video processing circuitry
along with all audio processing. Control of the television
is accomplished via a CPU embedded within the MT5388
processor. Below is a list of the key components located on the
Main Board.
TUNER
The tuner is a combination ATSC/NTSC unit. It can receive
traditional analog NTSC signals via cable or terrestrial along
with ATSC digital signals via terrestrial (8VSB) or cable (64 or
256 QAM).
MT5388 PROCESSOR
IC U3 performs the majority of the necessary audio and video
processing on the A board.
Analog Video Input Switch: All analog video sources are
Analog Video Input Switch: All analog video sources are
selected and A/D converted and scaled (if necessary) to 1280
X 720p 60HZ resolution.
Digital Audio and Video Decoder: The MPEG2 and
Digital Audio and Video Decoder: The MPEG2 and
Digital Dolby audio streams are received from the tuner for
decompression. All video sources which are not native 1280 X
720p 60HZ are scaled to this resolution. Digital audio content is
output to the class D amplifier for processing and amplification.
Audio Processing: Analog audio sources are selected and A/D
converted directly by U3. The audio information is then processed
digitally. Digital audio from the tuner and HDMI sources is also input
and processed. Class D amplifier U8 provides the drive for the
speakers.
HDMI Input and Switching: The customer can select the HDMI1 or
HDMI Input and Switching: The customer can select the HDMI1 or
HDMI2 input. Each HDMI input contains a dedicated EDI NVM (not
shown) to provide display information data to any device connected
via the HDMI inputs.
CPU: The CPU internal to the MT5388 processor controls all aspects
CPU: The CPU internal to the MT5388 processor controls all aspects
of the television functions. Input from the user along with monitoring
of critical circuits is also performed by this CPU.
LVDS Transmitter: Integrated into U3 is a Low Voltage Differential
LVDS Transmitter: Integrated into U3 is a Low Voltage Differential
Signaling (LVDS) transmitter. This circuit converts the 8-bit parallel
RGB video information into a set of high speed serial lines for noise-
free transmission to the TCON circuits located internally to the LCD
panel.
KDL-32BX311
15
SECTION 3 - CHASSIS OVERVIEW
POWER SUPPLY BOARD (G13 BOARD)
The Power Supply Board for this model is designated as the G13
Board.
There are 2 distinct sections on the power supply:
Standby Supply: Continuously operational as long as AC power
There are 2 distinct sections on the power supply:
Standby Supply: Continuously operational as long as AC power
is applied, the standby supply generates 3.3VDC for the circuits
requiring power while the unit is turned off. An unregulated 15-volt
line is present to provide power to the main relay, PFC and main
power supply at turn-on.
Main Supply: Once the power supply receives a power-on command
Main Supply: Once the power supply receives a power-on command
from the CPU on the A board, the main switching supply is turned
on to provide a regulated 12V source, a dedicated un-regulated 15V
for the audio circuits and an unregulated 24V source for the inverter
circuit.
SWITCH UNIT
This board contains the power, channel, and volume up/down and
menu buttons.
IR BOARD
Designated as the H Board, the IR Board contains the power,
standby, and timer LED’s are located on this board along with the IR
remote receiver and light level sensor.
LCD PANEL ASSEMBLY
The LCD Panel Assembly includes the LCD Panel, TCON Board,
and LED Backlight system.
The LCD Panel contains the actual liquid crystals, color filters, and
The LCD Panel contains the actual liquid crystals, color filters, and
polarizers. The liquid crystals are manipulated by the applied voltage
to pass a specific amount of light - from the backlight- depending on
the level of voltage applied.
The TCON performs all the control, timing, charge, and discharge
The TCON performs all the control, timing, charge, and discharge
functions driving the operation of the LCD Panel.
A new LCD Panel assembly from parts will include the following
A new LCD Panel assembly from parts will include the following
items.
LCD Panel
TCON Board
LED Backlight System
INVERTER
The inverter receives the unregulated 24V from the power supply
board and generates the required high voltage AC to power the
backlight lamps. A control line to turn on the inverter (backlights on)
is used in conjunction with a dimmer control to vary the light level of
the CCFL lamps.
As of the writing of this manual, the inverter is not available as a
As of the writing of this manual, the inverter is not available as a
replacement part. The LCD panel assembly must be replaced.
TCON BOARD
The TCON Board communicates between the LCD Panel and the
microprocessor on the Main Board. (NOTE: The TCON Board is not
available as a replacement part for all models.)
Click on the first or last page to see other KDL-32BX311 service manuals if exist.