Sony KDL-32BX301 Service Manual ▷ View online
- -
Screws
Screw Part number(s) and Description(s)
2-580-592-01 SCREW, +PSW M3X8
To remove the ‘Static Converter’ board disconnect all
connectors and then remove the 4 screws circled and ease the
board gently away from the back of the TV set.
connectors and then remove the 4 screws circled and ease the
board gently away from the back of the TV set.
2-5. Under Cover Removal
2-6. Static Converter Board Removal
2-. H2 Board Removal
2-7. A Board Removal
To remove the ‘Under Cover’ first remove the ‘Rear Cover’
(See Sec 2-2-1) and then the ‘Stand Assy’ (See Sec 2-2-2).
Then remove the 1 screw circled and carefully pull the
‘Under Cover’ away from the back of the TV set.
(See Sec 2-2-1) and then the ‘Stand Assy’ (See Sec 2-2-2).
Then remove the 1 screw circled and carefully pull the
‘Under Cover’ away from the back of the TV set.
Screws
Screw Part number(s) and Description(s)
2-580-592-01 SCREW, +PSW M3X8
To remove the ‘A’ board disconnect all connectors and then
remove the 6 screws circled and ease the board gently away
from the back of the TV set.
remove the 6 screws circled and ease the board gently away
from the back of the TV set.
To remove the ‘H2’ board first remove the ‘Speaker Bracket’
(See 2-2-3), then disconnect the 1 connector on the ‘H2’ board
and release the 2 clips circled and ease the board gently away
from the back of the TV set.
(See 2-2-3), then disconnect the 1 connector on the ‘H2’ board
and release the 2 clips circled and ease the board gently away
from the back of the TV set.
Clips
Screw
Screws
Screw Part number(s) and Description(s)
2-580-600-01 SCREW, +PSW M4X8
- 10 -
3-1. How to enter the Service Mode
Service adjustments to this model can be performed using the
supplied Remote Commander (See front cover).
supplied Remote Commander (See front cover).
SECTION 3 SERVICE MENUS
3. The following menu appears on the screen (See Pic.1).
4. Move to the corresponding adjustment item using the
‘ ’ or ‘ ’ arrow buttons on the Remote Commander.
5. Press the ‘ ’ arrow button to enter into the required menu
item.
6. Adjust the data value using the ‘ ’ or ‘ ’ arrow buttons on
on the Remote Commander.
7. To exit at any time press the ‘Menu’ button on the Remote
Commander.
1. Ensure the TV set is in standby mode.
2. Press the following sequence of buttons on the Remote
2. Press the following sequence of buttons on the Remote
Commander.
Pic.1
3-2. Service Menu Structure
The following descriptions show the items that can be
viewed and/or adjusted using the Service Menu.
Pic.2
Pic.3
NOTE:
After carrying out the service adjustments and to exit the service
mode, and prevent the customer accessing the ‘Service Mode’
switch the TV set off.
After carrying out the service adjustments and to exit the service
mode, and prevent the customer accessing the ‘Service Mode’
switch the TV set off.
3-2-1. Sound Adjust Menu
The following menu appears on the screen when you enter
the ‘Sound Adjust’ menu (See Pic.2).
3-2-2. Wide Band Tuning Menu
The following menu appears on the screen when you enter
the ‘Wide Band Tuning’ menu (See Pic.3).
Wide Band Tuning
Self diagnostic history
Status Information…
LVDS Spectrum(%0)
DPMS
Low of HPD
TVD_MCDONE_CNT
Demo Special
Bypass AVI Info Detect
Panel Selection
Service Mode
[</>]Set [Menu]Exit
Sound Adjust…
>>
>>
>>
>>
<[ 20 ]>
<[ On ]>
<[ 5 ]>
<[ 20 ]>
<[ No Define ]>
>>
<[ Off ]>
Sound Mode
EQ [120Hz]
EQ [200Hz]
EQ [500Hz]
EQ [1.2KHz]
EQ [3KHz]
EQ [7.5KHz]
EQ [12KHz]
Bass Offset
Treble Offset
Service Mode
[</>]Set [Menu]Exit
Back
<<
<[ Dynamic ]>
<[ 0.0dB ]>
<[ 0.0dB ]>
<[ 0.0dB ]>
<[ 0.0dB ]>
<[ 0.0dB ]>
<[ 0.0dB ]>
--Sound Adjust--
<[ 0.0dB ]>
<[ 0.0dB ]>
<[ 0.0dB ]>
Wide Band 1
Wide Band 2
Wide Band 3
Wide Band 4
Wide Band 5
Wide Band 6
Wide Band 7
Wide Band 8
Wide Band 9
Wide Band 10
Service Mode
[</>]Set [Menu]Exit
Back
<<
<[ Blank ]>
<[ Blank ]>
<[ Blank ]>
<[ Blank ]>
<[ Blank ]>
<[ Blank ]>
<[ Blank ]>
--Wide Band Tuning--
<[ Blank ]>
<[ Blank ]>
<[ Blank ]>
I/
TV
i+
5
+
(ON SCREEN (DIGIT 5) (VOLUME +) (TV)
DISPLAY)
DISPLAY)
(TV STANDBY)
(ON SCREEN
DISPLAY)
DISPLAY)
(DIGIT 5)
(VOLUME +)
- 11 -
The following menu appears on the screen when you enter
the ‘Self Check’ menu (See Pic.4).
3-2-3. Self Check Menu
Pic.4
The following menu appears on the screen when you enter
the ‘Status Information’ menu (See Pic.5).
3-2-4. Status Information Menu
Pic.5
3-2-5. Demo Special Menu
Pic.6
002 MAIN_POWE
003 AUD_PORT
003 DC_ALERT
005 BACK_POWE
006 BACKLITE
SELF CHECK
00000 00067 00000
[Menu]Exit
Back
<<
000
000
000
000
000
read
0%
Adjust
<[ 10 ]>
1:USB Phot READ:
2:Demo interva(sec):
2:Demo interva(sec):
<Demo Special>
[</>]Set [Menu]Exit
Demodulation Type
Transmission Mode
Guard interval
Code Rate
SNR
BER before RS
BER after RS
UEC
Signal Strength
0
0
N/A
N/A
N/A
0
Frequency
666000
16QAM
UNDEFINED
UNKNOWN
The following menu appears on the screen when you enter
the ‘Demo Special’ menu (See Pic.6).
- 12 -
3-3. How to enter the Factory Mode
3. The following menu appears on the screen (See Pic.7).
1. Ensure the TV set is
ON
.
2. Press the following sequence of buttons on the Remote
Commander.
Pic.7
4. Move to the corresponding adjustment item using the
‘ ’ or ‘ ’ arrow buttons on the Remote Commander.
5. Press the ‘ ’ arrow button to enter into the required menu
item.
6. Adjust the data value using the ‘ ’ or ‘ ’ arrow buttons on
on the Remote Commander.
7. To exit at any time press the ‘Return’ button on the Remote
Commander.
NOTE:
After carrying out the adjustments to exit the factory mode switch
the TV set off.
After carrying out the adjustments to exit the factory mode switch
the TV set off.
CI Plus Key Info
EDID Version
<[ Off ]>
[</>]Set [Return]Exit
Model Name
Serial Number
Picture Quality
Audio Quality
Serial Number
Picture Quality
Audio Quality
Factory Reset(default)
CI Plus Install
CI Plus Install
System FW
Color Temp
ADC Calibration
Factory Reset(limited)
Auto Phase
EDID WP
Site Air Channels
Site Cable Channels
White Balance
Site Air Channels
Site Cable Channels
White Balance
Factory Mode
Off
Aging Mode
Internal Pattern
Internal Pattern
Input Source
<[ Digital ]>
<[ Off ]>
<[ Protection ]>
<[ Off ]>
<[ Off ]>
<[ Off ]>
<[ Off ]>
<[ Off ]>
>>
>>
<[ Off ]>
<[ Off ]>
<[ Off ]>
<[ Off ]>
<[ Off ]>
0.17.040D1
0.01
Enable
KDL-32BX301
See rear or side of TV
PQ1.001
AQ3.2013
MUTING
MUTING
MENU
Pic.8
3-3-1. Color Temp Menu
The following menu appears on the screen when you enter
the ‘Color Temp’ menu (See Pic.8).
CI Plus Key Info
0.17.040D1
0.01
Enable
KDL-32BX301
See rear or side of TV
PQ1.001
AQ3.2013
<[ 512 ]>
<[ 512 ]>
<[ Off ]>
<[ Off ]>
<[ 512 ]>
<[ Off ]>
<[ Off ]>
<[ 454 ]>
<[ 443 ]>
<[ 344f ]>
<[ 344f ]>
<[ 512 ]>
Factory Mode
Off
Color Temp
Adjust Pattern
Adjust Pattern
Back
<<
<[ Off ]>
--Color Temperature--
G Offset
B Offset
Recall Data
B Offset
Recall Data
R Gain
G Gain
B Gain
R Offset
G Gain
B Gain
R Offset
EDID Version
<[ Neutral ]>
[</>]Set [Return]Exit
Model Name
Serial Number
Picture Quality
Audio Quality
Serial Number
Picture Quality
Audio Quality
Data Backup
System FW
Click on the first or last page to see other KDL-32BX301 service manuals if exist.