Sony KDL-32BX300 / KDL-40BX400 Service Manual ▷ View online
KLV-32BX300/40BX400
KLV-32BX300/40BX400
37
REF. NO.
PART NO.
DESCRIPTION
VALUES
REF. NO.
PART NO.
DESCRIPTION
VALUES
RB9705
1-234-400-21
CONDUCTOR, NETWORK (1005X4)
SWITCH
SF1001
1-814-370-11
SURFACE WAVE FILTER
TUNER
TU1001 1-693-789-11 TUNER,
TEQH8-L01A
VARISTOR
VD2200
1-802-078-11
VARISTOR (SMD)
VD2201 1-802-078-11 VARISTOR
(SMD)
G2HE
1-474-202-21
G2HE BOARD, COMPLETE
(KLV-40BX400
ONLY)
Component level repair information is not available.
G2LE
1-474-200-11
G2LE BOARD, COMPLETE
(KLV-32BX300
ONLY)
Component level repair information is not available.
H2LR
A-1744-833-A H2LR BOARD, MOUNTED
CAPACITOR
C104 1-164-230-11 CERAMIC
CHIP
220pF 5% 50V
C105 1-100-909-11 CERAMIC
CHIP
10μF 10%
6.3V
CONNECTOR
*
CN100
1-820-289-11
HEADER ASSEMBLY (PRINT PWB) 10P
DIODE
D101 6-503-064-01 DIODE
LNJ337W830S0
D102 6-503-082-01 DIODE
LNJ437W840S0
D104 6-503-064-01 DIODE
LNJ337W830S0
D107 6-503-068-01 DIODE
LNJ837W830S0
CHIP CONDUCTOR
JR101 1-216-864-11 SHORT
CHIP
JR102 1-216-864-11 SHORT
CHIP
JR103 1-216-864-11 SHORT
CHIP
TRANSISTOR
Q100 6-552-430-01 TRANSISTOR
DRC5114E0L
Q101 6-552-430-01 TRANSISTOR
DRC5114E0L
Q102 6-552-430-01 TRANSISTOR
DRC5114E0L
Q104 6-552-430-01 TRANSISTOR
DRC5114E0L
RESISTOR
R100 1-216-817-11 METAL
CHIP
470 5% 1/10W
R101 1-216-825-11 METAL
CHIP
2.2K 5% 1/10W
R102 1-216-817-11 METAL
CHIP
470 5% 1/10W
R104 1-216-825-11 METAL
CHIP
2.2K 5% 1/10W
R114 1-216-809-11 METAL
CHIP
100 5% 1/10W
R115 1-216-805-11 METAL
CHIP
47 5% 1/10W
H2LR
BAA
G2LE
G2HE
KLV-32BX300/40BX400
KLV-32BX300/40BX400
38
REF. NO.
PART NO.
DESCRIPTION
VALUES
REF. NO.
PART NO.
DESCRIPTION
VALUES
H2LS
A-1744-834-A
H2LS BOARD, MOUNTED
CAPACITOR
C1
1-114-325-11 CERAMIC
CHIP
0.1μF 10%
25V
C2
1-114-325-11 CERAMIC
CHIP
0.1μF 10%
25V
CONNECTOR
*
CN1
1-506-999-11
PIN, CONNECTOR (PC BOARD)
RESISTOR
R1
1-218-874-11 METAL
CHIP
13K 0.50%
1/10W
R2
1-218-866-11 METAL
CHIP
6.2K 0.50%
1/10W
R3
1-218-858-11 METAL
CHIP
3K 0.50%
1/10W
R4
1-218-855-11 METAL
CHIP
2.2K 0.50%
1/10W
R5
1-218-850-11 METAL
CHIP
1.3K 0.50%
1/10W
R7
1-216-864-11 SHORT
CHIP
SWITCH
S1
1-786-726-11 SWITCH,
TACTILE
S2
1-786-726-11 SWITCH,
TACTILE
S3
1-786-726-11 SWITCH,
TACTILE
S4
1-786-726-11 SWITCH,
TACTILE
S5
1-786-726-11 SWITCH,
TACTILE
S6
1-786-726-11 SWITCH,
TACTILE
S7
1-786-726-11 SWITCH,
TACTILE
*
CN1
1-506-999-11
PIN, CONNECTOR (PC BOARD)
RESISTOR
R1
1-218-874-11 METAL
CHIP
13K 0.50%
1/10W
R2
1-218-866-11 METAL
CHIP
6.2K 0.50%
1/10W
R3
1-218-858-11 METAL
CHIP
3K 0.50%
1/10W
R4
1-218-855-11 METAL
CHIP
2.2K 0.50%
1/10W
R5
1-218-850-11 METAL
CHIP
1.3K 0.50%
1/10W
R7
1-216-864-11 SHORT
CHIP
SWITCH
S1
1-786-726-11 SWITCH,
TACTILE
S2
1-786-726-11 SWITCH,
TACTILE
S3
1-786-726-11 SWITCH,
TACTILE
S4
1-786-726-11 SWITCH,
TACTILE
S5
1-786-726-11 SWITCH,
TACTILE
S6
1-786-726-11 SWITCH,
TACTILE
S7
1-786-726-11 SWITCH,
TACTILE
H2LS
A-1
KLV-32BX300/40BX400
KLV-32BX300/40BX400
Sony Corporation
Sony Technology Center
Technical Services
Service Publication Department
9-883-845-51
English
2010CJ74WEB-1
Printed in USA
© 2010.3
APPENDIX A: ENCRYPTION KEY COMPONENTS
Encryption key components developed by Sony Corporation contain confi dential
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
As part of this agreement specifi c instructions must be adhered to whenever a Circuit
Board containing encryption key components is repaired and/or replaced pursuant to the
following:
Board containing encryption key components is repaired and/or replaced pursuant to the
following:
1) In the service manual the Circuit Board(s) containing encryption key components
shall be identifi ed with a red outline and a .
2) Only repair boards or components listed in the service manual shall be utilized for
replacement and/or repair.
3) Disassembly, decryption, or reverse-engineering component(s) is strictly prohibited.
4) Any board in which the Servicer replaces an encryption key component must be
placed back into the set it orignally came from and the replaced defective component
MUST BE DESTROYED. Boards cannot be swapped.
MUST BE DESTROYED. Boards cannot be swapped.
5) If a Circuit Board identifi ed with a red outline and a in the service manual is deemed
to be defective:
a) and if a core charge is imposed and is covered under the product warranty, the
defective un-repaired or modifi ed board MUST BE RETURNED to Sony.
b) and if the core charge is NOT covered under the product warranty, the defective
un-repaired or modifi ed board MUST BE DESTROYED.
5) If a unit is destroyed (such as fi eld scrap), the Circuit Board identifi ed with a
red outline and a in the service manual MUST BE DESTROYED.
is a trademark of Sony Electronics
Reproduction in whole or part without written permission is prohibited. All rights reserved
A-1
KLV-32BX300/40BX400
KLV-32BX300/40BX400
Sony Corporation
Sony Technology Center
Technical Services
Service Publication Department
9-883-845-51
English
2010CJ74WEB-1
Printed in USA
© 2010.3
APPENDIX A: ENCRYPTION KEY COMPONENTS
Encryption key components developed by Sony Corporation contain confi dential
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
As part of this agreement specifi c instructions must be adhered to whenever a Circuit
Board containing encryption key components is repaired and/or replaced pursuant to the
following:
Board containing encryption key components is repaired and/or replaced pursuant to the
following:
1) In the service manual the Circuit Board(s) containing encryption key components
shall be identifi ed with a red outline and a .
2) Only repair boards or components listed in the service manual shall be utilized for
replacement and/or repair.
3) Disassembly, decryption, or reverse-engineering component(s) is strictly prohibited.
4) Any board in which the Servicer replaces an encryption key component must be
placed back into the set it orignally came from and the replaced defective component
MUST BE DESTROYED. Boards cannot be swapped.
MUST BE DESTROYED. Boards cannot be swapped.
5) If a Circuit Board identifi ed with a red outline and a in the service manual is deemed
to be defective:
a) and if a core charge is imposed and is covered under the product warranty, the
defective un-repaired or modifi ed board MUST BE RETURNED to Sony.
b) and if the core charge is NOT covered under the product warranty, the defective
un-repaired or modifi ed board MUST BE DESTROYED.
5) If a unit is destroyed (such as fi eld scrap), the Circuit Board identifi ed with a
red outline and a in the service manual MUST BE DESTROYED.
is a trademark of Sony Electronics
Reproduction in whole or part without written permission is prohibited. All rights reserved