Sony KDL-26NL140 / KDL-32NL140 / KDL-37NL140 Service Manual ▷ View online
17
KDL-26NL140/32NL140/37NL140
KDL-26NL140/32NL140/37NL140
1-10. ETC-INVERTER BOARD REMOVAL
1 Remove 6 screws.
2 Disconnect 6 connectors (KDL-26NL140 ONLY)
2 Disconnect 6 connectors (KDL-26NL140 ONLY)
Disconnect 7 connectors (KDL-32NL140 ONLY)
Disconnect 8 connectors (KDL-37NL140 ONLY)
1 Remove 2 screws (KDL-26NL140 ONLY)
Remove 3 screws (KDL-32NL140 ONLY)
Remove 7 screws (KDL-37NL140 ONLY)
2 Disconnect 1 connector
1-9. LCD
PANEL
REMOVAL
1
2
LCD Panel
Bezel
1
2
SHIELD REMOVAL
NOTE
Disconnect the
Balancer Board Connectors
REMOVE SCREWS
SECURING
SHIELD
REMOVE
CONNECTOR AND
PULL BOARD TO
THE RIGHT
1-9-1. CLEANING THE LCD PANEL
CAUTION: When cleaning the TV, be sure to unplug the power cord
to avoid any chance of electric shock.
1 Clean the cabinet of the TV with a dry soft cloth.
2 Wipe the LCD screen gently with a soft cloth.
Stubborn stains may be removed with a cloth slightly
moistened with a solution of mild soap and warm water.
If using a chemically pretreated cloth, please follow the
instruction provided on the package.
Never use strong solvents such as a thinner, alcohol or
benzine for cleaning.
Periodic vacuuming of the ventilation openings is
recommended to ensure to proper ventilation.
☛
18
KDL-26NL140/32NL140/37NL140
KDL-26NL140/32NL140/37NL140
1
Loudspeaker
Loudspeaker
Bezel
1-11. LOUDSPEAKERS REMOVAL
1 Slide out 2 Loudspeakers from Bezel
19
KDL-26NL140/32NL140/37NL140
KDL-26NL140/32NL140/37NL140
WIRE DRESSING
KDL-26NL140 ONLY
OVERALL VIEW
�
MA2 Wire Dressing 26NL [Rev:1.0]
MA2 CHASSIS
WIRE DRESSING and EMI
26NL140
Page 1/10
MB609206 (2 / 21)
20
KDL-26NL140/32NL140/37NL140
KDL-26NL140/32NL140/37NL140
KDL-26NL140 ONLY
�
MA2 Wire Dressing 26NL [Rev:1.0]
HM3 cable and Speakers cable:
HM3 cable and Speakers cable:
Speaker cable:
1-910-044-76
1-910-044-76
Only HM3
cable through
this hook.
cable through
this hook.
HM3/H1 cable:
1-910-044-74
1-910-044-74
Caution Point:
Avoid
dressing the speaker cable
over the rubber grommet,
dress the cable along the
side of grommet.
over the rubber grommet,
dress the cable along the
side of grommet.
Route cables by inserting it through
these 11 Holder Ribs on Center Cab.
these 11 Holder Ribs on Center Cab.
HM3
Page 2/10
MB609206 (3 / 21)
MB609206 (3 / 21)
HM3 CABLE AND SPEAKERS CABLE
Click on the first or last page to see other KDL-26NL140 / KDL-32NL140 / KDL-37NL140 service manuals if exist.