Sony KDL-24R425A / KDL-32R424A / KDL-32R425A Service Manual ▷ View online
KDL-24R425A/32R424A/32R425A 25
SECTION 4 - EXPLODED VIEW/PART NUMBER INFORMATION
NOTE: The components identified by shading and
!
mark are critical for safety.
Replace only with part number specified.
NOTE: The components identified by a red outline and a mark contain confidential
information. Specific instructions must be adhered to whenever these components are
repaired and/or replaced. (See Appendix A)
251
1-910-108-52
CONNECTOR ASSEMBLY 24 MB-PSU 15P
252
1-910-108-54
CONNECTOR ASSEMBLY 24 MB-IR 6P
253
1-910-108-53
CONNECTOR ASSEMBLY 24 MB-SP LR 4P
254
1-910-108-55
(LVDS) CONNECTOR ASSEMBLY 24 LVDS 30P
REF. NO.
PART NO.
DESCRIPTION
REF. NO.
PART NO.
DESCRIPTION
CONNECTORS
251
252
254
253
303
301
304
302
301
1-910-108-48
CONNECTOR ASSEMBLY 32 MB-PSU 15P
302
1-910-108-49
CONNECTOR ASSEMBLY 32 MB-SP LR 4P
303
1-910-108-50
CONNECTOR ASSEMBLY 32 MB-IR 6P
304
1-910-108-51
(LVDS) CONNECTOR ASSEMBLY 32 LVDS 30P
KDL-24R425
KDL-32R424A/32R425A
KDL-24R425A/32R424A/32R425A 26
SECTION 4 - EXPLODED VIEW/PART NUMBER INFORMATION
NOTE: The components identified by shading and
!
mark are critical for safety.
Replace only with part number specified.
NOTE: The components identified by a red outline and a mark contain confidential
information. Specific instructions must be adhered to whenever these components are
repaired and/or replaced. (See Appendix A)
SCREWS
Main Board (4), Bracket Chassis R (1),
Power Supply Board (4), SP Cover (2)
Bracket Chassis L (1), Rear Cover (11)
Rear Cover (4)
Main Board (4), Bracket Panel M (2)
Not Used
RC Terminal (1), Rear Cover (2)
RC Terminal (1), Rear Cover (2)
SCREW, +BVTP 4X12 TYPE2 IT-3
SCREW, +PSW M3X8
SCREW, +BVTP 3X8 TYPE2 IT-3
SCREW, M5X18 SW (IRST)
2-580-639-01
2-580-592-01
7-685-646-79
P/N
DESCRIPTION
KDL-24R425A
KDL-32R424A / 32R425A
Power Supply Board (4),
4-466-884-01
SCREW, M4X8 W (FANT)
Speaker R (2), Speaker L (2)
AC Cover (1)
4-159-298-01
SCREW, +PSW M4X10
SCREW, M3X4 NYLOK (FANT)
Bracket Panel T (2),
Bracket Panel B (2)
Bracket Panel B (2)
Bracket Vesa (2)
4-466-883-01
AC Cover (1)
4-466-880-01
4-466-881-01
4-466-882-01
SCREW, M3X10 SW (FANT)
SCREW, M3X6 SW (FANT)
Not Used
Not Used
Speaker R (2), Speaker L (2)
Bracket Vesa (4)
Table-Top Stand to TV (2)
Neck R (2), Neck L (2)
Table-Top Stand to TV (2),
Neck R (2), Neck L (2)
Not Used
Not Used
KDL-24R425A/32R424A/32R425A 27
ACCESSORIES AND PACKAGING
PART NO.
DESCRIPTION
4-466-880-01
SCREW, M5X18 SW (IRST)
(SCREWS TO ATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV.
CAUTION: These screws cannot be used to secure the TV to the Wall
Mount Brackets.
4-456-413-41
GUIDE, QUICK SET UP
4-456-411-41
MANUAL, INSTRUCTION
MISCELLANEOUS
PART NO.
DESCRIPTION
4-465-018-01
SHIELD, AL (FANT)
4-459-244-41
LABEL, INFORMATION
(KDL-24R425A ONLY)
4-459-244-61
LABEL, INFORMATION
(KDL-32R424A ONLY)
4-459-244-31
LABEL, INFORMATION
(KDL-32R425A ONLY)
OPTIONAL ACCESSORIES
PART NO.
DESCRIPTION
4-414-470-01
SUPPORT BELT KIT
REMOTE COMMANDER
PART NO.
DESCRIPTION
1-492-066-21
REMOTE COMMANDER (RM-YD093)
SECTION 5 - ACCESORIES/PART NUMBER INFORMATION
KDL-24R425A/32R424A/32R425A A-1
Sony Corporation
Sony LCSC
Technical Services
Service Publications Department
9-883-508-01
English
2013CJ74WEB-1
© 2013.3
is a trademark of Sony Electronics.
Reproduction in whole or part without written permission is prohibited. All rights reserved.
APPENDIX A: ENCRYPTION KEY COMPONENTS
Encryption key components developed by Sony Corporation contain confidential information and shall be handled under the non-disclosure obligations provided
in the applicable agreement with Sony Corporation (and/or its subsidiary).
As part of this agreement specific instructions must be adhered to whenever a Circuit Board containing encryption key components is repaired and/or replaced
As part of this agreement specific instructions must be adhered to whenever a Circuit Board containing encryption key components is repaired and/or replaced
pursuant to the following:
1.
In the service manual the Circuit Board(s) containing encryption key components shall be identified with a red outline and a .
2.
Only repair boards or components listed in the service manual shall be utilized for replacement and/or repair.
3.
Disassembly, decryption or reverse-engineering component(s) is strictly prohibited.
4. Any board in which the Servicer replaces an encryption key component must be placed back into the set it orignally came from and the replaced
defective component MUST BE DESTROYED. Boards cannot be swapped.
5. If a Circuit Board identified with a red outline and a in the service manual is deemed to be defective:
a.
and if a core charge is imposed and is covered under the product warranty, the defective un-repaired or modified board MUST BE RETURNED to
Sony.
b. and if the core charge is NOT covered under the product warranty, the defective un-repaired or modified board MUST BE DESTROYED.
6.
If a unit is destroyed (such as field scrap), the Circuit Board identified with a red outline and a in the service manual MUST BE DESTROYED.
