Sony KDE-P42MRX1 / KDE-P50MRX1 Service Manual ▷ View online
–
13
–
MRX1
RM-Y1013
The Features Menu
The “Features” menu allows you to alter
various settings of the TV.
various settings of the TV.
To do this:
Press the MENU button and press
v
twice to
select
, then press OK to enter this menu.
Next, press
v
or
V
to select the desired option
and press OK. Finally, read below how to
operate into each option.
operate into each option.
POWER SAVING
This option allows you to reduce the power consumption of this TV.
To do this:
After selecting the option, press OK. Then, press
v
or
V
to select Reduce. Next, press OK to store.
AUTO FORMAT
This option allows you to automatically change the aspect ratio of the screen.
To do this:
After selecting the option, press OK. Then, press
After selecting the option, press OK. Then, press
v
or
V
to select On (if you wish the TV set to
automatically switch the screen format according to the broadcast signal) or Off (if you wish to
keep your preference). Finally, press OK to store.
keep your preference). Finally, press OK to store.
Even if you have selected “On” or “Off”, you can always modify the format of the screen by
pressing
repeatedly on the remote control to select one of the following formats:
SMART: Imitation of wide screen effect for 4:3 broadcast.
4/3:
Conventional 4:3 picture size, full picture
information.
14/9:
Compromise between 4:3 and 16:9 picture size.
ZOOM: Widescreen format for letterbox movies.
WIDE:
For 16:9 broadcast. Full picture information.
• In “SMART”, “ZOOM” and “14/9” modes, parts of the top and bottom of the screen are
cut off. Press
v
or
V
to adjust the position of the image on the screen (e.g. to read
subtitles).
• Only "WIDE" and "4/3" modes can be selected for an RGB signal connected to the PC
connector.
• According to the format of diffussion, black bands can always appear whatever the
selected mode.
,
m
Picture Adjustment
Select:
Enter:
OK
Exit:
MENU
Picture Mode:
Live
Contrast:
Reset:
Noise Reduction:
Auto
Colour Tone:
Normal
Select:
Enter:
OK
Exit:
MENU
Features
Power saving
Reduce
Auto Format
On
Film mode
Auto
AV2 Output
TV
AV3 Output
TV
SmartLink
Output
Connection Guide
RGB Centering
PC Adjustment
Screen Saver
Logo Illuminated
Yes
Features
Power saving
Reduce
Auto Format
On
Film mode
Auto
AV2 Output
TV
AV3 Output
TV
SmartLink
Output
Connection Guide
RGB Centering
PC Adjustment
Screen Saver
Logo Illuminated
Yes
Select:
Back:
Enter: :
OK
MENU
4:3
ZOOM
14:9
WIDE
SMART
The Set Up Menu
The “Set Up” menu allows you to alter various
options on this TV.
To do this:
Press the MENU button and press
Press the MENU button and press
v
four times
to select
, then press OK to enter this menu.
Next, press
v
or
V
to select the desired option
and press OK. Finally, read below how to
operate into each option.
operate into each option.
AUTO TUNING
This option only appears and only can be altered if you are watching an analogue channel.
This option allows you to automatically search for and store all available TV channels.
To do this:
After selecting the option, press OK and then proceed in the same way as in the steps 5 and 6 of
the section “Switching On the TV and Automatically Tuning” on page 21.
After selecting the option, press OK and then proceed in the same way as in the steps 5 and 6 of
the section “Switching On the TV and Automatically Tuning” on page 21.
PROGRAMME SORTING
This option only appears and only can be altered if you are watching an analogue channel.
This option allows you to change the order in which the channels (TV Broadcast) appear on the
screen.
screen.
To do this:
After selecting the option, press OK and then proceed in the same way as in the step 7 of the section
“Switching On the TV and Automatically Tuning” on page 21.
After selecting the option, press OK and then proceed in the same way as in the step 7 of the section
“Switching On the TV and Automatically Tuning” on page 21.
PROGRAMME LABELS
This option only appears and only can be altered if you are watching an analogue channel.
This option allows you to name a channel using up to five characters (letters or numbers).
To do this:
1
After selecting this option, press OK and then press
v
or
V
to select the programme number
with the channel you wish to name. Next press OK.
2
With the first element of the Label column highlighted, press OK and
v
,
V
,
B
or
b
to select
the letter, next press OK.
When you have finished, press
v
,
V
,
B
or
b
to select the word “End” on the screen and finally
press OK to turn off the menu from the screen.
• To correct a letter, select "
%
" on the screen to go back and press OK.
• For a blank, select " " on the screen and press OK.
,
m
Picture Adjustment
Select:
Enter:
OK
Exit:
MENU
Picture Mode:
Live
Contrast:
Reset:
Noise Reduction:
Auto
Colour Tone:
Normal
Select:
Exit:
MENU
Set Up
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Enter:
OK
Set Up
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Select:
Back:
Enter:
OK
MENU
–
14
–
MRX1
RM-Y1013
The Digital INFO Menu
The “Digital INFO” menu gives you information
on the programmes currently being shown as well
as the those programmes which are on next.
on the programmes currently being shown as well
as the those programmes which are on next.
To do this:
With the TV in Digital mode, press the
With the TV in Digital mode, press the
button
to access this menu. Next read below how to
operate each option.
operate each option.
DIGITAL INFO DISPLAY
This display gives you a brief description of the next programme in the schedule.
This display gives you a brief description of the next programme in the schedule.
To do this:
Press the
Press the
b
button. If the programme box is blank, there is no information currently available. To
return to the starting point, press the
B
button repeatedly until the description for the current
programme reappears.
To change channels while the “Digital INFO display” is on screen, press the relevant
numbered buttons on the remote control.
numbered buttons on the remote control.
Press the MENU button to exit from this display.
SUBTITLES
This feature will place Digital subtitles on the screen (similar to selecting p.888 in analogue
Teletext mode).
Teletext mode).
To do this:
With the “Digital INFO display” on the TV screen, press the RED button to access the “Subtitles”
pop-up menu. Press the
pop-up menu. Press the
V
or
v
button to highlight the language required then press OK to select.
To remove subtitles from the TV screen, access the “Subtitles” pop-up menu and select
“Off”.
Press the MENU button to exit from this menu.
AUDIO
This feature allows you to listen to the broadcast in different languages when the programme is
broadcast in multiple languages.
broadcast in multiple languages.
To do this:
With the “Digital INFO display” on the TV screen, press the GREEN button to access the “Audio”
pop-up menu. Press the
pop-up menu. Press the
V
or
v
button to highlight the language required then press OK to select.
Press the MENU button to exit from this menu.
Channel 5
Tue 18 Mar
15:27
Subtitles
Set-up
Audio
REC
Pickid Lake
09:05-09:25
American talk show. Today's guests are sporting a variety of
"faice" books.
"faice" books.
05
The Wright Stuff
09:05-09:25
09:05-09:25
The Digital Set-up Menu
This menu contains several features that will
allow you to customise the Digital side of your
TV.
TV.
To do this:
With the TV in Digital mode, press the
With the TV in Digital mode, press the
button to
access the “Digital INFO display” on the TV screen,
then press the BLUE button to access the “Set-up”
(“Main Menu”). Next read below how to operate each
option.
then press the BLUE button to access the “Set-up”
(“Main Menu”). Next read below how to operate each
option.
Channel 5
Tue 18 Mar
15:27
Subtitles
Set-up
Audio
REC
Pickid Lake
09:05-09:25
American talk show. Today's guests are sporting a variety of
"faice" books.
"faice" books.
05
The Wright Stuff
09:05-09:25
09:05-09:25
Main Menu
Favourite Programme
Wallpaper
Parental Control
Auto Tuning
Detail Set-up
CAM Set-up
Wallpaper
Parental Control
Auto Tuning
Detail Set-up
CAM Set-up
Press OK key to enter.
Digital Set-up
Exit
BLUE
FAVOURITE PROGRAMME
This option allows you to store your favourite channels (TV Broadcast) in a list for quick access.
To do this:
1
Once you have entered into the “Main Menu” press the
V
or
v
button to highlight
“Favourite Programme” then press the OK button to display the “Favourite Programme
Set” menu.
Set” menu.
2
Press the
V
or
v
button to scroll through the list until the channel you wish to store as a
favourite is highlighted. If you do not wish to select one of these channels as a favourite, press
the RED or GREEN button to display the previous or next 5 channels in the list.
the RED or GREEN button to display the previous or next 5 channels in the list.
3
When you have found and highlighted a programme you want to register as a favourite, press
the OK button. A tick appears alongside that programme in the display.
the OK button. A tick appears alongside that programme in the display.
• Press the OK button again to cancel your selection.
• Press the YELLOW button if you wish to delete (clear) all favorite settings
• Press the YELLOW button if you wish to delete (clear) all favorite settings
4
Repeat steps 2 and 3 to store other programmes as favourites.
5
Press the BLUE button to return to the “Main Menu” or press the MENU button to exit from
the menu.
the menu.
WALLPAPER
This option allows you customise the background pattern of the Digital menus.
To do this:
1
Once you have entered into the “Main Menu”, press the
V
or
v
button to highlight
“Wallpaper” then press the OK button to display the “Wallpaper” menu.
2
Press the
V
or
v
button to select your choice of wall paper (4 different choices) followed by
the OK button to store.
3
Press the BLUE button to return to the “Main Menu” or press the MENU button to exit from
the menu.
the menu.
–
15
–
MRX1
RM-Y1013
Analogue Teletext
Teletext is an information service transmitted by most Analogue TV stations. The index page of the teletext
service (usually page 100) gives you information on how to use the service. To operate teletext, use the remote
control buttons as indicated below.
service (usually page 100) gives you information on how to use the service. To operate teletext, use the remote
control buttons as indicated below.
Teletext errors may occur if you use a channel (TV Broadcast) with a weak signal.
To switch on Teletext :
1
Select the Analogue broadcast channel which carries
the teletext service you wish to view.
the teletext service you wish to view.
2
Press the
button once to enter Picture And Text
(PAT) mode. The screen is divided into two with the
Text display on the left and the TV channel in the
botton right corner.
Text display on the left and the TV channel in the
botton right corner.
While viewing PAT, you can zoom the picture
screen by pressing
v
or
V
buttons. Once the
two screens are overlapped, they can be swapped
by pressing the OK button.
by pressing the OK button.
3
If you wish to view the Text in full screen mode, press
the
the
button a second time.
To select a Teletext page:
Input 3 digits for the page number, using the numbered buttons.
• If you make a mistake, retype the correct page number.
• If the counter on the screen continues searching, it is because the page
• If you make a mistake, retype the correct page number.
• If the counter on the screen continues searching, it is because the page
is not available. If this is the case, input another page number.
To access the next or preceding page:
Press PROG + (
Press PROG + (
) or PROG - (
) .
To freeze a teletext page:
Press
Press
/
. Press it again to cancel the freeze.
To select a sub page:
A teletext page may consist of several sub pages. In this case, one or more arrows appear next
to the page number. Press
to the page number. Press
B
or
b
to display an information line at the bottom of the screen
showing the number of sub pages contained on this page. As soon as sub pages are available, they
start to automatically run. If you want to stop the show and select your desired sub page, press
repeatedly
start to automatically run. If you want to stop the show and select your desired sub page, press
repeatedly
B
or
b
.
To Switch Off Teletext:
Press
Press
.
Fastext
Fastext service lets you access Teletext pages with one button push.
When you are in Teletext mode and Fastext is broadcast, a colour coded menu appears at
When you are in Teletext mode and Fastext is broadcast, a colour coded menu appears at
the bottom of the teletext page. Press the appropriate coloured button (red, green, yellow
or blue) to access the page corresponding to your menu choice.
or blue) to access the page corresponding to your menu choice.
Entertainment
09:07 18 Mar
Entertainment News
Lottery
Films
Soups
Singles and Albums Charts
Web Guide
On This Day
Lottery
Films
Soups
Singles and Albums Charts
Web Guide
On This Day
Press BLUE to change section.
B B C
SHOURTCUTS CHANGE TV BACK MENU
Digital Teletext
• The “Digital Teletext” is only available when watching Digital channels.
• If the TV is not already in Digital mode, press the DIGITAL button on the remote control.
• Many Digital broadcasters now provide a Digital Teletext service in the form of a dedicated Teletext channel.
This Digital service includes high quality text and graphics along with advanced navigation options.
• The appearance, content and navigation methods of all Digital Text services are decided by the broadcaster.
For example, Digital Text from the BBC may look different to Digital Text from ITV which may use
different navigation methods.
different navigation methods.
• Most of the Digital Text services currently available use simple navigation methods based on the following
buttons:
• The
button to load and exit Digital Teletext.
• The
V
,
v
,
B
and b buttons (to move around the screen),
• The OK button (to select items on screen),
• The
• The
button (to cancel a selection or exit Digital Teletext),
• The four coloured buttons (to access shortcuts).
Dedicated Digital Teletext channels
1
With the TV in Digital mode, press
. Next press the numbered
buttons on the remote control to select a dedicated Teletext
channel number. To find out the channel number of a dedicated
Digital Teletext channel, use the “Channel Index menu”. (Please
refer to “The Channel Index menu” section of this instruction
manual, on page 22)
channel number. To find out the channel number of a dedicated
Digital Teletext channel, use the “Channel Index menu”. (Please
refer to “The Channel Index menu” section of this instruction
manual, on page 22)
2
Once the Teletext channel is displayed, follow the on-screen
instructions to access the required information.
instructions to access the required information.
On some pages the TV programme is also displayed.
Instructions on-screen will tell you how to change the
displayed programme.
displayed programme.
3
If when viewing the Teletext pages, you are requested to select
“OK” or “Cancel”, press the OK button for “OK” and the
“OK” or “Cancel”, press the OK button for “OK” and the
button for “Cancel”.
4
When you have finished viewing Teletext, press again the
button to exit.
Selecting Teletext from other Digital channels
Normal Teletext services may also be available on other Digital
channels. Sometimes this is indicated by a small symbol or text
display on your TV screen, superimposed on the channel you are
watching.
display on your TV screen, superimposed on the channel you are
watching.
1
Press the V, v, B or b buttons to select the symbol then press the
OK button to display the chosen information.
2
Alternatively, you may be requested to use the numbered and
coloured buttons on your remote control to display the various
pages of text information. If when viewing the teletext pages, you
are requested to select “OK” or “Cancel”, press the OK button for
“OK” and the
pages of text information. If when viewing the teletext pages, you
are requested to select “OK” or “Cancel”, press the OK button for
“OK” and the
button for “Cancel”.
3
Once the text information is displayed on screen, use the
V
,
v
,
B
or
b
buttons, the coloured buttons and/or the numbered buttons to
access the chosen information.
4
When you have finished viewing Teletext, press the
button
and then select an alternative Digital channel.
DIGITA
L
–
16
–
MRX1
RM-Y1013
Connecting Equipment to the TV
• Using the following instructions you can connect a wide range of optional equipment to your TV set.
• Connecting cables are not supplied.
• Connecting cables are not supplied.
Connecting a VCR
To connect a VCR, please refer to the “Connecting the aerial and VCR” section of this instruction manual on page 18.
Connecting a VCR or a DVD recorder that supports SmartLink
SmartLink is a direct link between the TV set and a SmartLink compatible VCR/DVD recorder. For more
information on SmartLink, please refer to the instruction manual of your SmartLink VCR/DVD recorder.
If you use a VCR or a DVD recorder that supports SmartLink, please connect the VCR or the DVD recorder to the
TV using a Scart lead to the Scart
TV using a Scart lead to the Scart
2/
G or
3/
I.
Both Scart connectors
2/
G and
3/
I cannot support SmartLink at the same time. If you
connect a VCR or a DVD recorder to both Scart connectors, select which Scart supports SmartLink through
the “SmartLink ” option in the “Features” menu. For details see page 32.
the “SmartLink ” option in the “Features” menu. For details see page 32.
To avoid snowy
picture, do not
connect external
equipment to
connectors
picture, do not
connect external
equipment to
connectors
D and
E at the same time.
G
PlayS
tatio
n
2
DVD Recorder
with component
signal format
with component
signal format
Hi-Fi
Compact AV
System /Amplifier
System /Amplifier
VCR
“PlayStation”*
Decoder
DVD Recorder
Sub woofer
S VHS/Hi8/DVC
camcorder
camcorder
Personal
computer
computer
*
“PlayStation” is a product of
Sony Computer
Entertainment, Inc.
Entertainment, Inc.
*
“PlayStation” is a trademark
of Sony Computer
Entertainment, Inc.
Entertainment, Inc.
S
S
Viewing pictures from equipment connected to the TV
1
Connect your equipment to the designated media receiver socket, as indicated on page 60.
2
Switch on the connected equipment.
3
To watch the picture from the connected equipment, press the
button repeatedly until the
correct input symbol appears on the screen.
Symbol Input Signals
1
• Audio / video input signal through the Scart connector
H
1
• RGB input signal through the Scart connector
H. This symbol appears only if
an RGB source has been connected.
2
• Audio / video input signal through the Scart connector
G.
2
• RGB input signal through the Scart connector
G. This symbol appears only if
an RGB source has been connected.
3
• Audio/video input signal through the Scart connector
I.
3
• S Video Input signal through the Scart connector
I. This symbol appears only
if an S Video source has been connected.
4
• Component input signal through the Y, P
B
/C
B
, P
R
/C
R
jacks
K and audio input
signal through
J.
5
• Video input signal through the phono socket
E and Audio input signal through
F.
5
• S Video Input signal through the front S Video input jack
D and Audio signal
through
F. This symbol appears only if an S Video source has been connected.
6
• RGB input signal through the PC connectors
B and C.
4
Press the
button on the remote control to return to the normal TV picture.
For Mono Equipment
Connect the phono plug to the L/G/S/I socket on the front of the media receiver unit and select
Connect the phono plug to the L/G/S/I socket on the front of the media receiver unit and select
5 or
5 input signal using the instructions above. Next, refer to the “Sound Adjustment”
section of this manual and set “Dual Sound” option to “A” on the sound menu screen (see page
29).
29).
S
S
S
Click on the first or last page to see other KDE-P42MRX1 / KDE-P50MRX1 service manuals if exist.