Sony KD-65X9505B Service Manual ▷ View online
KD-65/85X9505B(CEI/RU3)
9
SELF DIAGNOSIS FUNCTION
DIAGNOSTIC TEST INDICATORS
When an error occurs, the Smart Core Red LED will flash a set number of times to indicate the possible cause of the problem.
If there is more than one error, the LED will identify the first of the problem areas.
Result for all of the following diagnostic items are displayed on screen.
If the screen displays a “0”, no error has occurred .
When an error occurs, the Smart Core Red LED will flash a set number of times to indicate the possible cause of the problem.
If there is more than one error, the LED will identify the first of the problem areas.
Result for all of the following diagnostic items are displayed on screen.
If the screen displays a “0”, no error has occurred .
The units in this manual contain a self-diagnostic function. If an error occurs, the Smart Core Red LED will automatically begin to flash.
The number of times the LED flashes translates to a probable source of the problem.
A definition of the Smart Core Red LED flash indicators is listed in the instruction manual for the user’s knowledge and reference.
If an error symptom cannot be reproduced, the remote commander can be used to review the failure occurrence data stored in memory to reveal past problems and how often these
problems occur.
RED LED blinking count
Detection Items
2x
<G/B> Main 12V failure [MAIN_POWE]
* This failure is not saved.
* This failure is not saved.
3x
<B> Main 5.0/3.3/1.8/1.0 failure [DC_ALERT]
* 5.0/1.0V failures are not saved.
* 5.0/1.0V failures are not saved.
<B/S> Audio amp. protection / Audio amp. I2C NACK [AUD_ERR]
<B> HDMI equalizer/switch I2C NACK [HDMI_EQ/HDMI_EQ2/HDMI_EQ3] * There is Temp. sensor on the same I2C bus
<B/U> Tuner or demodulator I2C NACK [TU_DEMOD]
<B/U> AFE device I2C NACK [AFE_I2C]
<B/U> AFE device SPI NACK [AFE_SPI] * only for AEP,CH
<B> V-by-One lock monitoring between CXD4746 and NT72324[SC_OUT_ERR]
<B> CXD4746 I2C NACK and V-by-One lock monitoring between CXD4746 and Ayu2[SC_ERR]
<B> FW initialization error and I2C NACK for NT72324[FRCD_I2C]
<B> HDMI equalizer/switch I2C NACK [HDMI_EQ/HDMI_EQ2/HDMI_EQ3] * There is Temp. sensor on the same I2C bus
<B/U> Tuner or demodulator I2C NACK [TU_DEMOD]
<B/U> AFE device I2C NACK [AFE_I2C]
<B/U> AFE device SPI NACK [AFE_SPI] * only for AEP,CH
<B> V-by-One lock monitoring between CXD4746 and NT72324[SC_OUT_ERR]
<B> CXD4746 I2C NACK and V-by-One lock monitoring between CXD4746 and Ayu2[SC_ERR]
<B> FW initialization error and I2C NACK for NT72324[FRCD_I2C]
4x
<L/P> LED driver failure [LD_ERR]
<L/P> LED voltage error [VLED]
5x
<B/T>Tcon device initialization failure detection [TCON_ERR]
<B/T>Tcon device I2C communication error detection [TCON_ERR]
<P/T/G/B> Panel ID EEPROM I2C NACK (Also panel power failure is a suspect) [P_ID_ERR]
*PCON_ERR and TG_ERR is not used.
<B/T>Tcon device I2C communication error detection [TCON_ERR]
<P/T/G/B> Panel ID EEPROM I2C NACK (Also panel power failure is a suspect) [P_ID_ERR]
*PCON_ERR and TG_ERR is not used.
6x
<G/P/B> Backlight failure [BACKLIGHT]
<G/T/P/B> Backlight converter OVP [BACKLIGHT]
<G/T/P/B> Backlight converter OVP [BACKLIGHT]
7x
Over temperature protection [TEMP_ERR]
<B> Temp. sensor I2C NACK [TEMP_ERR] * There is HDMI Eq on the same I2C bus.
<B> Temp. sensor I2C NACK [TEMP_ERR] * There is HDMI Eq on the same I2C bus.
8x
Software Error (Also the main board’s memory or CAM module is a suspect)
<B> CXD4754 device error and WDT detection [LYON_ERR]
*Even if detecting CXD4745 Device error, the set does not go to safety shutdown (only when user uses CXD4754 function, the set reboots)
and not flash LED, only records error logs.
<B> CXD4754 device error and WDT detection [LYON_ERR]
*Even if detecting CXD4745 Device error, the set does not go to safety shutdown (only when user uses CXD4754 function, the set reboots)
and not flash LED, only records error logs.
9x
<U>Tuner board error [TU_BOARD]
<G>: Power supply board, <B>: Main board, <T>: Tcon board, <L>: LED driver (LD) board ,
<P>: Panel module , <S>: Speaker , <A>: Power Adapter, <U> Tuner board
<P>: Panel module , <S>: Speaker , <A>: Power Adapter, <U> Tuner board
`
Model Name :KDL-RB2T
Serial Number :1000162
Package Number :PKG0.410EUA
Device ID :B0:00:02:4D:72:88
Wired Mac :D8:D4:3C:A2:EE:9F
Wireless Mac :34:23:87:d4:48:a4
USB dongle :N/A
<MAIN>
Serial Number :1000162
Package Number :PKG0.410EUA
Device ID :B0:00:02:4D:72:88
Wired Mac :D8:D4:3C:A2:EE:9F
Wireless Mac :34:23:87:d4:48:a4
USB dongle :N/A
<MAIN>
<EXT>
DM0.410EUA
WF:3.5.3.9999
WF0.300W00AA
WF:--------
DF5.137W00AA
BT:
YM1.224W00AA
2.1.14.471
M5.503C
EFR:03.01.01.18
(DM0.390EUA)
DD0.370W00AA
DD0.370W00AA
<FS>
PK0.370W00AA
SCF:50.10
AM0.410WW
ROF:-----------------
MID:2411AB19
PID:0E042040
PNL:YD4S550LTU010
KD-65/85X9505B(CEI/RU3)
10
SELF DIAGNOSIS FUNCTION
[SELF DIAGNOSTIC SCREEN DISPLAY]
`
SELF CHECK
002 MAIN_POWE ------------ ------------ ------------ 00
003 AFE_I2C ------------ ------------ ------------ 00
003 DC_ALERT ------------ ------------ ------------ 00
003 AUD_PROT ------------ ------------ ------------ 00
003 HDMI_EQ ------------ ------------ ------------ 00
003 TU_DEMOD ------------ ------------ ------------ 00
003 AFE_SPI ------------ ------------ ------------ 00
003 SC_OUTERR ------------ ------------ ------------ 00
003 SC_ERR ------------ ------------ ------------ 00
003 FRCD_I2C ------------ ------------ ------------ 00
003 HDMI_EQ2 ------------ ------------ ------------ 00
003 HDMI_EQ3 ------------ ------------ ------------ 00
003 LYON_ERR ------------ ------------ ------------ 00
004 VLED ------------ ------------ ------------ 00
004 LD_ERR ------------ ------------ ------------ 00
005 TCON_ERR ------------ ------------ ------------ 00
005 P_ID_ERR ------------ ------------ ------------ 00
005 PCON_ERR ------------ ------------ ------------ 00
005 TG_ERR ------------ ------------ ------------ 00
006 BACKLITE ------------ ------------ ------------ 00
007 TEMP_ERR 120823132523 ------------ ------------ 01
007 FAN_ERR ------------ ------------ ------------ 00
008 VPC_WDT ------------ ------------ ------------ 00
008 MEPS_WDT ------------ ------------ ------------ 00
008 HOST_WDT ------------ ------------ ------------ 00
008 STBY_WDT ------------ ------------ ------------ 00
008 AFE_WDT ------------ ------------ ------------ 00
003 AUD_PROT ------------ ------------ ------------ 00
003 HDMI_EQ ------------ ------------ ------------ 00
003 TU_DEMOD ------------ ------------ ------------ 00
003 AFE_SPI ------------ ------------ ------------ 00
003 SC_OUTERR ------------ ------------ ------------ 00
003 SC_ERR ------------ ------------ ------------ 00
003 FRCD_I2C ------------ ------------ ------------ 00
003 HDMI_EQ2 ------------ ------------ ------------ 00
003 HDMI_EQ3 ------------ ------------ ------------ 00
003 LYON_ERR ------------ ------------ ------------ 00
004 VLED ------------ ------------ ------------ 00
004 LD_ERR ------------ ------------ ------------ 00
005 TCON_ERR ------------ ------------ ------------ 00
005 P_ID_ERR ------------ ------------ ------------ 00
005 PCON_ERR ------------ ------------ ------------ 00
005 TG_ERR ------------ ------------ ------------ 00
006 BACKLITE ------------ ------------ ------------ 00
007 TEMP_ERR 120823132523 ------------ ------------ 01
007 FAN_ERR ------------ ------------ ------------ 00
008 VPC_WDT ------------ ------------ ------------ 00
008 MEPS_WDT ------------ ------------ ------------ 00
008 HOST_WDT ------------ ------------ ------------ 00
008 STBY_WDT ------------ ------------ ------------ 00
008 AFE_WDT ------------ ------------ ------------ 00
009 TU_BOARD ------------ ------------ ------------ 00
00081-000671-00088 00000000000000000570-00000000000000000132
00081-000671-00088 00000000000000000570-00000000000000000132
Error count
Error item name
Smart Core
Red LED
blinking count
Total operation time by hour
Boot count
Panel operation time by hour
Error
timestam
p for last
recorded
error
Error
timestam
p for
second
last
recorded
error
Error
timestam
p for 3rd
last
recorded
error
Count of writing to NAND device:
As vfat partition– As ext4 partition
MAC address
of Wi-Fi USB
dongle*1.
External module
information
Main CPU
information
*1
1. When no Wi-Fi USB dongle is connected, NA is displayed.
2. If you insert/disconnect Wi-Fi USB Dongle during Self Diagnosis
Display, press <1> -> <4> on remote commander to refresh Mac
address displayed on “USB dongle”.
- Alternatively, you can re-display Self Diagnosis Display to update the
information.
*Following error is invalid in RB2.
FAN_ERR
EMIT_ERR
TCON_ERR
Format of error timestamps
YYMMDDhhmmss (in UTC)
Example:
120823132523 -> Aug 23 2012 13:25:23 UTC
* Only when time is set, an error timestamp is saved.
Panel Operation Time is recorded every 30 min, but Total Operation Time is recorded every 1 hr.
Therefore, the panel op. time might become larger than the total op. time.
KD-65/85X9505B(CEI/RU3)
11
SELF-DIAGNOSTIC SCREEN DISPLAY
For errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be confirmed, it is possible to bring up past occurrences of failure for
confirmation on the screen:
[To Bring Up Screen Test]
In standby mode, press buttons on the remote commander sequentially in rapid succession as shown below:
SELF DIAGNOSIS FUNCTION
Since the diagnostic results displayed on the screen are not automatically cleared, always check the self-diagnostic screen.
After you have completed the repairs, clear the result display to “0”.
Clearing the Self Check Diagnostic List
1. Error history :
Press the Channel 8 => Channel 0 .
2. Panel operation time :
Press the Channel 7 => Channel 0 .
Exiting the Self-diagnostic screen
To exit the Self Diagnostic screen, turn off the power to the TV by pressing the POWER button on the remote or the POWER button on the TV.
KD-65/85X9505B(CEI/RU3)
12
SEC 1. DISASSEMBLY
• There are clutch in the yellow frame[ ]. Therefore please be careful in the case of the disassembly or assembly of parts.
Click on the first or last page to see other KD-65X9505B service manuals if exist.