Sony KD-65S9005B Service Manual ▷ View online
KD-65/75S9005B(CEI/CEL/UKA)
125
SAVE CHANGING DATA 1 (Only when B* board is replaced)
1) In “Digital” service mode
1) In “Digital” service mode
(
“002 MODEL”
category)
000 SEG Select segment information
001 DEST
Select destination information
002 MODELNAME
Select Model Name
003 SERIAL Can be set Only Once for the new board
005 VAR_TYPE Select variable information
a.
Change data for each model.
b.
Press
“Mute”
, “0” on remote
sequentially
. Red “
WRITE
” is shown. This indicates writing is in process.
c.
After a while, red “
WRITE
” disappears. Green Done will be displayed
for a while, which means writing process is done.
ADJUSTMENT
d.
For the items SEG, DEST, MODELNAME and
VAR_TYPE, after changing each item, service save
(“mute”+”0”) is required. For the item SERIAL, after
inputting the serial number, press key “12” or “Enter” to
save the data.
VAR_TYPE, after changing each item, service save
(“mute”+”0”) is required. For the item SERIAL, after
inputting the serial number, press key “12” or “Enter” to
save the data.
–
Please save the items according to the sequence “SEG ->
DEST -> MODELNAME ->VAR_TYPE”
DEST -> MODELNAME ->VAR_TYPE”
–
When Saving the item "SEG", sometimes instead of
"Writing", the word "Pending" will appear. In this case, skip
"SEG", saving "DEST“, "MODELNAME“ and
“VAR_TYPE” is OK.
"Writing", the word "Pending" will appear. In this case, skip
"SEG", saving "DEST“, "MODELNAME“ and
“VAR_TYPE” is OK.
Please refer “RB2G WW Service Update Procedure for Panel, Board and
Software” (manual P/N 9-888-155- ) in TISS for details.
DIGITAL
SERVICE
002 MODEL
000 SEG
000 SEG
HS_BASE
Write
VIDEO:STANDARD AUDIO:STANDARD
PSAVE:STANDARD
MAIN: SUB:
TUNER/----/---- ----/----/NTSCU
----X----/----- ----X----/-----
-----/--- -----/---
PSAVE:STANDARD
MAIN: SUB:
TUNER/----/---- ----/----/NTSCU
----X----/----- ----X----/-----
-----/--- -----/---
KD-65/75S9005B(CEI/CEL/UKA)
126
SAVE CHANGING DATA 2
1) Write data for “Chassis” or “VPC” service mode
a. Press “Mute” on remote.
It shows green “
SERVICE
” changes to green “
WRITE
”.
b. Press “0” or “enter” on remote. Green “
WRITE
” changes to red “
WRITE
”. It indicate writing is processing.
c. After a while, red “
WRITE
” changes to green “
SERVICE
”. Writing process is done at this point.
2) TV reboot is necessary for applying data change.
ADJUSTMENT
CHASSIS
WRITE
000
WYVERN
000
S2_NOISE_TH 32
KD-65/75S9005B(CEI/CEL/UKA)
127
ADJUSTMENT
WHITE BALANCE ADJUSTMENT
Note: Please execute this adjustment if necessary.
Change Data of “VPC” service mode. (
“003 WB”
category)
a. Press “1” or “4” on remote to select WB adjustment menu.
b. Change data by pressing “3” or “6”. Each range of these items is 0~1023.
c. Press “mute” +”0” on remote to save the data.
“SERVICE” comment is changed to “
WRITE
”, indicating writing process.
d. After a while, “
WRITE
” comment returns to “SERVICE”, which means writing process is done.
VPC
SERVICE
003
WB
000
R_DRV
128
VPC
SERVICE
003
WB
001
G_DRV
128
VPC
SERVICE
003
WB
002
B_DRV
128
VPC
SERVICE
003
WB
003
R_BKG
128
VPC
SERVICE
003
WB
004
G_BKG
128
VPC
SERVICE
003
WB
005
B_BKG
128
KD-65/75S9005B(CEI/CEL/UKA)
128
ADJUSTMENT
SET TO SHIPPING CONDITION
How to do shipping condition.
a. Move to “Digital” service mode.
b. Press “8” on remote. It shows green “
a. Move to “Digital” service mode.
b. Press “8” on remote. It shows green “
SERVICE
” changes to green “
RST-
”.
c. Press “mute” on remote. Added green “
EXE
” after green “
RST-
” .
d. Press “0” on remote. Green “
EXE-RST
” changes to red “
EXE-RST
”. It indicate writing is processing.
e. After a while, red “
EXE-RST
” changes to green “
SERVICE
”.
f. And BLINK Smart Core WHITE LED. Writing process is done at this point.
<Another way>
You can set to shipping condition w/o entering Service Mode.
-> “Cursor Up” on remote + “Power Key” on TV.
<Another way>
You can set to shipping condition w/o entering Service Mode.
-> “Cursor Up” on remote + “Power Key” on TV.
SONY