Sony KD-49X8000C Service Manual ▷ View online
APPENDIX-2
Slide Clamp x3
• Hold wires
• Hold wires
VA Tape x10
・Fix wire
・Fix wire
Wire Dressing (KD-65X8000C)
• Hold wires
Harness Tie x2
• Fix wire
• Fix wire
・Fix wire
117
APPENDIX-3
Caution for Panel handling
Don’t grab plastic bezel only.
Risk of bezel broken
Risk of bezel broken
Don’t push screen.
Risk of screen broken
Risk of screen broken
Risk of bezel broken.
Risk of screen broken.
OK
NG
118
APPENDIX-4
BMFW board
How to disassembly Heat sink
BMFW board
HEAT SINK (MUFF)
HEAT SINK (MUFF C)
HEAT SINK (MUFF C)
HOLDER, HS WS (MUF)
4-548-743-01
4-548-743-01
HOLDER, (HS MUF)
4-549-188-01
4-549-188-01
<NOTE>
HEAT SINK are already attached to the B board for service.
If you need to disassemble HEAT SINK from B board,
Please cut HOLDER,HS WS(MUF) with tool (nippers) from B side of B board.
If you need to disassemble HEAT SINK from B board,
Please cut HOLDER,HS WS(MUF) with tool (nippers) from B side of B board.
,
(
)
( pp
)
However, please it carefully because some damage may be given
to the neighborhood parts or the B board itself.
to the neighborhood parts or the B board itself.
Do not reuse both HOLDER. Please replace to new parts.
Potting is necessary for re-assembly of HEAT SINK.
Please follow
Please follow
SBR "New Potting TIM Operation for board repair"
for details.
nipper
119
g
p
p
APPENDIX-4
BMFW board
How to disassembly Heat sink
BMFW board
HEAT SINK (MUFF)
HEAT SINK (MUFF C)
HEAT SINK (MUFF C)
HOLDER, HS WS (MUF)
4-548-743-01
4-548-743-01
HOLDER, (HS MUF)
4-549-188-01
4-549-188-01
<NOTE>
HEAT SINK are already attached to the B board for service.
If you need to disassemble HEAT SINK from B board,
Please cut HOLDER,HS WS(MUF) with tool (nippers) from B side of B board.
If you need to disassemble HEAT SINK from B board,
Please cut HOLDER,HS WS(MUF) with tool (nippers) from B side of B board.
,
(
)
( pp
)
However, please it carefully because some damage may be given
to the neighborhood parts or the B board itself.
to the neighborhood parts or the B board itself.
Do not reuse both HOLDER. Please replace to new parts.
Potting is necessary for re-assembly of HEAT SINK.
Please follow
Please follow
SBR "New Potting TIM Operation for board repair"
for details.
nipper
119
g
p
p