Sony KD-27FS170 Service Manual ▷ View online
KD-27FS170/32FS170/36FS170
KD-27FS170/32FS170/36FS170
18
KD-27FS170
Pass audio ferrite beside heat sink as shown in picture (left side
of heat sink back view)
of heat sink back view)
Install Chisilin ferrite core 1-500-586-11 on DGC
and use a cable tie 4-041-041-11 to avoid movement of
ferrite as shown in picture.
and use a cable tie 4-041-041-11 to avoid movement of
ferrite as shown in picture.
50mm
KD-27FS170/32FS170/36FS170
KD-27FS170/32FS170/36FS170
19
KD-32FS170
- Dress Right speaker wire through DGC's tie wrap.
- Dress Left speaker wire under DGC and make a knot as picture shows.
- Dress Left speaker wire under DGC and make a knot as picture shows.
KD-32FS170 MODELS ONLY
KD-27FS170/32FS170/36FS170
KD-27FS170/32FS170/36FS170
20
KD-32FS170
- Pass RGB harness (A/CN301~ C/CN705) through
rotation coil using.
- Install rotation coil lead wire under DY clip.
- Pass VM harness over rotation coil lead & RGB
harness as shown in picture.
rotation coil using.
- Install rotation coil lead wire under DY clip.
- Pass VM harness over rotation coil lead & RGB
harness as shown in picture.
Dress Heater (A/CN503~C/CN901) & Dinamic focus
(A/CN502~VD/CN800) harness, make a loop using a
9mm purse lock (3-703-982-02) as shown in picture.
(A/CN502~VD/CN800) harness, make a loop using a
9mm purse lock (3-703-982-02) as shown in picture.
Rotation coil
wire.
wire.
VM harness
KD-27FS170/32FS170/36FS170
KD-27FS170/32FS170/36FS170
21
KD-32FS170
Dress DY's lead wire using a 9mm purse lock (3-
703-982-02).
703-982-02).
Dress G2 wire twist once as picture
shown, do not over stress wire.
shown, do not over stress wire.
Click on the first or last page to see other KD-27FS170 service manuals if exist.