Sony RM-PJ4 / VPL-ES3 Service Manual ▷ View online
1-5
VPL-ES3
1-3-6.
Power Board and Lamp Power Supply
Remove the Tunnel Outlet unit before starting the removal work.
n
In older to remove the connector that is connected to the lamp power supply block, remove the lamp
power supply first. Then, remove the connector after the lamp power supply block is raise up. Do not give
an excessive force to the harness.
n
In older to remove the connector that is connected to the lamp power supply block, remove the lamp
power supply first. Then, remove the connector after the lamp power supply block is raise up. Do not give
an excessive force to the harness.
7 Lamp
9 Cushion
0 Lamp power supply
1 Two stands assembly
2 Power board
8 Lamp power
supply
connector
supply
connector
5 Lamp door
4 loosen screw.
6 Loosen two screws.
3 Screw
(+PWH 3
(+PWH 3
x 8)
CN603
To the main board J12
From the Main board CN602
(Red and Black wires)
(Red and Black wires)
1-6
VPL-ES3
1-3-7.
Optics Section
2 Lamp box assembly
6 Optics section
1 Rotate the Zoom dial clockwise
as shown until it is stopped.
as shown until it is stopped.
4 Focus/Zoom adjust
assembly
assembly
1 Two tapping screws
(PAN 3
(PAN 3
x 7)
3 Two tapping screws
(PAN 3
(PAN 3
x 7)
5 Four screws
(+P 2.5
(+P 2.5
x 8)
2 Rotate the Focus dial
counter-clockwise as
shown until it is stopped.
counter-clockwise as
shown until it is stopped.
3 Rotate the Focus dial
counter-clockwise as
shown until it is stopped.
counter-clockwise as
shown until it is stopped.
5 Install the Optics section
in the Lower Case.
in the Lower Case.
During the assembling process,
never change the gear position
that is set by step 3.
never change the gear position
that is set by step 3.
4 Rotate the Focus/Zoom Adjust Assembly
counter-clockwise until it is stopped.
counter-clockwise until it is stopped.
6 Install the Focus/Zoom
Adjust Assembly as shown.
Adjust Assembly as shown.
7 After installation is completed, verify that the Optics
section can rotate from the position A to the position
B smoothly.
section can rotate from the position A to the position
B smoothly.
A
B
Lower case
Assembling Method of Optics section and
Focus/Zoom Adjust Assembly
Focus/Zoom Adjust Assembly
Phase matching
Focus dial
1-7
VPL-ES3
1-3-8.
DC Fan
1 Two tapping screws
(PAN 3
(PAN 3
x 7)
3 Two tapping screws
(+PWH 3
(+PWH 3
x 10)
2 Duct LCD assembly
8 Duct lamp
4 DC fan
6 DC fan
5 Two tapping screws
(M 3
(M 3
x 25)
7 Two tapping screws
(PAN 3
(PAN 3
x 7)
1-8
VPL-ES3
1-4. Warning on Power Connection
Use a proper power cord for your local power supply.
The United States,
Continental
UK, Ireland,
Japan
Canada
Europe
Australia, New Zealand
Plug type
VM0233
290B
YP-12A
COX-07
_
1)
YP332
Connector type
VM0089
386A
YC-13B
COX-02
VM0310B
YC-13
Cord type
SJT
SJT
H05VV-F
H05VV-F
N13237/CO-228
VCTF
Rated Voltage/Current
10A/125V
10A/125V
10A/250V
10A/250V 10A/250V
7A/125V
Safety approval
UL/CSA
UL/CSA
VDE
VDE
VDE
DENAN
Cord length (max.)
4.5m (14 feet 9 inches)
_
(1) Use an appropriate rating plug which is applied to local regulations.
Click on the first or last page to see other RM-PJ4 / VPL-ES3 service manuals if exist.