DOWNLOAD Sony DPP-FP77 Service Manual ↓ Size: 555.32 KB | Pages: 14 in PDF or view online for FREE

DPP-FP77

2009I0500-1

  © 2009.9

AEP Model

UK Model

East European Model

Russian Model

E Model

Chinese Model

Korea Model

Revised-1

Replacement of the previously issued
SERVICE MANUAL 9-852-685-11
with this manual.

— 2 —

DPP-FP77

These specifications are extracted from Operating
Instructions of DPP-FP67/FP77 (4-129-145-12 (1)).

■

Dye sublimation printing
(Yellow/Magenta/Cyan 3 pass)

300 (H) 

× 300 (V) dpi

256 levels of processing
(8 bits each for Yellow/Magenta/Cyan)

1 800 dots x 1 200 dots

P (4 

× 6 inch) size:

101.6 

× 152.4 mm (maximum, borderless)

Memory card 

*1 *2 *3 *4  

: Approx. 63 sec.

PictBridge 

*3 *5 

: Approx. 63 sec.

Via PC 

*6 

: Approx. 60 sec.

USB (Full Speed) for PC connection
PictBridge/EXT INTERFACE connector

“Memory Stick” media slot
SD Memory Card slot
xD-Picture Card slot

JPEG: DCF 2.0 compatible, Exif 2.21

compatible, JFIF 

*7

TIFF: Exif 2.21 compatible
BMP 

*8 

: 1, 4, 8, 16, 24, 32 bit Windows

format

Some image file formats are not compatible.

8 000(H) 

× 6 000(V) dots

(Excluding Index Print)

FAT12/16/32

DCF format, 8.3 format, less than 6th or higher
hierarchy

999 files for a memory card/a USB memory

Please use a Sony optional color print pack
designed for the printer.

LCD panel:

8.8 cm (3.5 type) TFT drive

Total number of dots:

230 400 (320 RGB 

× 240) dots

DC IN jack, 

 24 V

While printing: 72 W (maximum)
On standby mode: less than 1W

5 

°C to 35 °C (41 °F to 95 °F)

Height: Approx. 66.8 mm (2 

3

/

4

 inches)

Width: Approx. 180 mm (7 

1

/

8

 inches)

Depth: Approx. 137 mm (5 

1

/

2

 inches)

Approx. 148.5 mm (5 

7

/

8

 inches)

(including the handle)

Depth when the paper tray is installed:
Approx. 316 mm (12 

1

/

2

 inches) longer than the

above depth.

Approx. 1.1 kg (2 lb 7 oz)
(excluding the paper tray, ink ribbon, AC adaptor)

• Paper tray (1)
• AC adaptor (1)
• USB cable (1)
• AC power cord

*9

 

(1)

• Cleaning cartridge (1)/Cleaning sheet (1)
• CD-ROM

(Windows Printer Driver Software Ver.1.0
and PMB (Picture Motion Browser)
Ver.4.2)

• Operating Instructions
• Read This First (1)
• About the Print Packs (1)
• Warranty

(In some regions, the warranty is not supplied.)

• Sony End User Software License Agreement

■

~ 100 V to 240 V, 50/60 Hz, 1.2 A MAX

 24 V, 1.6 A (Peak 3.0A, 9.2 s)

5 

°C to 35 °C (41 °F to 95 °F)

Approx. 60 

× 30.5 × 122 mm

(2 

3

/

8

 

× 1 

1

/

4

 

× 4 

7

/

8

 inches)

(w/h/d, excluding protruding parts and cables)

Approx. 300 g (11 oz)

Design and specifications are subject to change
without notice.

* The total number of sheets of P size print paper

that the printer can print is estimated to be
approximately 2 000. For the total number of
sheets printed, please check “Printer information
display” of the “Print setup” menu, by pressing
the MENU button.

*1: Print Settings: Borderless, No date print

*2: When printing a photo (Approx. 4.3 MB file

size) taken by a Sony digital still camera
containing effective picture elements of
approximately 12 100 000 pixels or equivalent.

*3: Time required from when the PRINT button is

pressed to when printing is finished. (The
printing time may vary depending on the
equipment used, the size and format of image
data, type of memory card, the settings of an
application and operating conditions.)

*4: When printing from a “Memory Stick PRO

Duo” media inserted in the printer’s slot

*5: Time from when the PRINT button on the

OSD of a DSC-W200 digital camera,
connected by a USB cable, is pressed to when
the printing is finished, while printing via the
camera.

*6: The time for data processing and transferring

is excluded.

*7: Baseline JPEG with 4:4:4, 4:2:2, or 4:2:0

format

*8: You cannot print using the PMB.

*9: The plug shape and specifications of the AC

power cord differ depending on the region in
which you purchased the printer.

— 3 —

DPP-FP77

Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)

Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40

°C higher than

ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350

°C.

Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!

• Strong viscosity

Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.

• Usable with ordinary solder

It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.

0

0

DPP-FP77