DOWNLOAD Sony DPP-FP70 Service Manual ↓ Size: 683.37 KB | Pages: 26 in PDF or view online for FREE

Model
DPP-FP70
Pages
26
Size
683.37 KB
Type
PDF
Document
Service Manual
Brand
Device
Service Manual / Other
File
dpp-fp70.pdf
Date

Sony DPP-FP70 Service Manual ▷ View online

— 2 —
DPP-FP70
SPECIFICATIONS
These specifications are extracted from Operating
Instructions of DPP-FP70/FP90 (3-097-069-12 (1)).
 Printer
Printing method
Dye sublimation printing (Yellow/Magenta/
Cyan 3 pass)
Resolution
300 (H) x 300 (V) dpi
Image processing per dot
256 levels processing (8 bits for each Yellow/
Magenta/Cyan)
Printing size
P (Post Card/4 x 6 inch) size:
101.6 x 152.4 mm (maximum, borderless)
Printing time (per sheet)
Memory card
*1*2*3*4
:
Approx. 45 sec.
PictBridge
*3*5
:
Approx. 56 sec.
Via PC
*6
:
Approx. 50 sec.
Input/Output connectors
USB (Full Speed) for PC connection
PictBridge/EXT INTERFACE
connector
Slot
“Memory Stick” insertion slot
SD Card insertion slot
CompactFlash card insertion slot
Compatible image file formats
JPEG: DCF 2.0 compatible, Exif 2.21
compatible, JFIF
*7
TIFF: Exif 2.21 compatible
BMP
*8
: 1, 4, 8, 16, 24, 32 bits Windows format
Some image file formats are not compatible.
Maximum number of pixels to be handled
8 000(H) x 6 000(V) dots
(Excluding Index Print and part of
Creative Print)
Maximum number of files to be handled
9 999 files for a memory card/an
external device
Ink ribbon/Print Paper
Please use a Sony optional color print pack
designed for the printer.
LCD screen
LCD panel:
   6.2 cm (2.5 type) TFT drive
Total number of dots:
   115 200 (480 x 240)
Power requirements
DC IN jack, DC 24V
Power consumption
While printing: 80 W (maximum)
On standby mode: less than 1W
Operating temperature
°
C to 35 
°
C (41 
°
F to 95 
°
F)
Dimensions
Height: Approx. 63 mm
( 2 
1
/
2
 inches) (printer)
    Approx. 72 mm
( 2 
7
/
8
 inches)
(including LCD projecting parts)
Width: Approx. 180 mm
( 7 
1
/
8
 inches)
Depth: Approx. 137 mm
( 5 
1
/
2
 inches)
(excluding a handle)
   Approx. 149 mm
( 5 
7
/
8
 inches)
(including a handle)
Depth when the paper tray is
installed: Approx. 169 mm ( 6 
3
/
4
inches) longer than the above depth.
Mass
Approx. 1.1 kg (2 lb 7 oz)
(excluding the paper tray, inkribbon,
AC power adaptor)
Supplied accessories
• Paper tray
• Cleaning cartridge/Cleaning sheet
• AC adaptor
• AC power cord
• Operating Instructions
• Read This First
• Warranty (In some regions, the warranty is
not supplied.)
• Sony End User Software License Agreement
• CD-ROM (Sony DPP-FP70/FP90 Printer
Driver Software Ver.1.0 and Picture Motion
Browser Ver.2.0)
 AC power adaptor AC-S2422
Power requirements
AC 100 V to 240 V, 50/60 Hz, 1.5 A to 0.75 A
Rated output voltage
DC 24 V, 2.2 A (Peak 3.7 A, 6.5 s)
Operating temperature
°
C to 35 
°
C (41 
°
F to 95 
°
F)
Dimensions
Approx. 60 x 30.5 x 122 mm
(2 
3
/
8
 x 1 
1
/
4
 x 4 
7
/
8
 inches)
(w/h/d, excluding protruding parts and cables)
Mass
Approx. 305 g (11 oz)
Design and specifications are subject to
change without notice.
*
The total number of sheets of P size print
paper that the printer can print is estimated
to be approximately 2,000. For the total
number of sheets, please check “Printer
Information Display” of the “Display/
Printer setup” menu.
*1: Print Settings: Borderless, No time stamp,
AutoFine Print 4: ON (Photo)
*2: When printing a photo (4.22 MB file size)
taken by a Sony digital still camera
containing effective picture elements of
approximately 10,100,000 or equivalent.
*3: Print Speed: Time from when the PRINT
button is pressed to when printing is
finished. (The printing time may vary
depending on a used equipment, a format
of an image, a used memory card, settings
of an application and operating conditions.)
*4: When printing from a “Memory Stick PRO
Duo” inserted in the printer ‘s slot
*5: When printing via DSC-N2 connected by
USB cable. Time from when the “PRINT”
button on the OSD of the camera is pressed
to when the printing is finished.
*6: The time for data processing and
transferring is excluded.
*7: Baseline JPEG with 4:4:4, 4:2:2, or 4:2:0
format
*8: You cannot print using the Picture Motion
Browser.
Ver. 1.2 2007.05
— 3 —
DPP-FP70
1.
Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
 : LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40
°
C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
°
C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 
0
 OR DOTTED LINE WITH
MARK 
0
 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 
0
 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
— 4 —
DPP-FP70
TABLE OF CONTENTS
1.
DISASSEMBLY
1-1.
LID UPPER SECTION ··················································· 1-2
1-2.
PRINTER SECTION ······················································ 1-3
2.
REPAIR PARTS LIST
2-1.
EXPLODED VIEWS ······················································ 2-2
3.
TROUBLESHOOTING
3-1.
ELECTRICAL TROUBLESHOOTING ························· 3-1
3-2.
MECHANICAL TROUBLESHOOTING ······················· 3-2
4.
ADJUSTMENT AND CHECK
····································· 4-1
4-1.
SERVICE MODE ···························································· 4-2
4-2.
ADJUSTMENT ······························································· 4-3
4-3.
CHECK ··········································································· 4-5
DPP-FP70
Link
Link
1. DISASSEMBLY
DISASSEMBLY
DISASSEMBLY
COMMON NOTE FOR DISASSEMBLY
COMMON NOTE FOR DISASSEMBLY
Page of 26
Display

Sony DPP-FP70 Service Manual ▷ Download

  • DOWNLOAD Sony DPP-FP70 Service Manual ↓ Size: 683.37 KB | Pages: 26 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony DPP-FP70 in PDF for free, which will help you to disassemble, recover, fix and repair Sony DPP-FP70 Service Manual / Other. Information contained in Sony DPP-FP70 Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.