Sony DPP-FP55 Service Manual ▷ View online
4-5E
4. REPAIR PARTS LIST
4. REPAIR PARTS LIST
DPP-FP55
Cleaning cartridge (1)
X-2055-849-2
X-2055-849-2
AC adaptor (AC-S2425) (1)
0
1-479-013-
31
AC power cord (1)
(US/CND model)
(US/CND model)
0
1-829-810-21
AC power cord (1)
(AEP/E/EE/RUS model)
(AEP/E/EE/RUS model)
0
1-824-910-31
AC power cord (1)
(UK model)
(UK model)
0
1-827-269-22
AC power cord (1)
(AUS model)
(AUS model)
0
1
-555-074-71
AC power cord (1)
(KR model)
(KR model)
0
1-823-947-
71
2-682-264-11
OPERATING, INSTRUCTIONS (ENGLISH)
(US,CND,AEP,UK,E,AUS,EE,RUS)
2-682-264-21
OPERATING, INSTRUCTIONS (FRENCH) (CND,AEP)
2-682-264-31
OPERATING, INSTRUCTIONS (GERMAN)(AEP)
2-682-264-41
OPERATING, INSTRUCTIONS (DUTCH)(AEP)
2-682-264-51
OPERATING, INSTRUCTIONS (ITALIAN)(AEP)
2-682-264-61
OPERATING, INSTRUCTIONS (SPANISH)(AEP,E)
2-682-264-71
OPERATING, INSTRUCTIONS (PORTUGUESE)(AEP,E)
2-682-264-81
OPERATING, INSTRUCTIONS (RUSSIAN)(EE,RUS)
2-682-264-91
OPERATING, INSTRUCTIONS (ARABIC)(E)
2-682-265-11
OPERATING, INSTRUCTIONS (PERSIAN)(E)
2-682-265-21
OPERATING, INSTRUCTIONS (KOREAN)(KR)
2-682-266-11
QUICK START GUIDE (ENGLISH)
(US,CND,AEP,UK,E,AUS,EE,RUS)
2-682-266-21
QUICK START GUIDE (FRENCH)(CND,AEP)
2-682-266-31
QUICK START GUIDE (GERMAN)(AEP)
2-682-266-41
QUICK START GUIDE (DUTCH)(AEP)
2-682-266-51
QUICK START GUIDE (ITALIAN)(AEP)
2-682-266-61
QUICK START GUIDE (SPANISH)(AEP,E)
2-682-266-71
QUICK START GUIDE (PORTUGUESE)(AEP,E)
2-682-266-81
QUICK START GUIDE (RUSSIAN)(EE,RUS)
2-682-266-91
QUICK START GUIDE (ARABIC)(E)
2-682-267-11
QUICK START GUIDE (PERSIAN)(E)
2-682-267-21
QUICK START GUIDE (KOREAN)(KR)
Checking supplied accessories.
Other accessories
• Refer to page 4-1 for mark 0.
Tray bottom (1)
2-190-618-02
2-190-618-02
Tray cover (A)
(Paper tray lid) (1)
2-190-619-02
(Paper tray lid) (1)
2-190-619-02
Tray cover (B)
(Paper eject tray) (1)
2-190-620-01
(Paper eject tray) (1)
2-190-620-01
Tray sheet (1)
2-190-622-01
2-190-622-01
Tray plate (1)
2-190-621-01
2-190-621-01
The paper tray is not supplied as a single assembled part.
The respective parts of the paper tray are supplied separately
as shown below.
The respective parts of the paper tray are supplied separately
as shown below.
CD-ROM
(DPP-FP55 Printer Drive Software)
(Picture Motion Browser) (1)
(DPP-FP55 Printer Drive Software)
(Picture Motion Browser) (1)
2-688-619-01
Ver. 1.4 2007.08
The changed portions from
Ver. 1.3 are shown in blue.
Ver. 1.3 are shown in blue.
Conversion (2P) Adaptor
0
1-569-008-21 (E)
5-1
DPP-FP55
Note:
Download the latest firmware and obtain the technical memo from the ESI homepage.
Writing of firmware:
Be sure to write the latest firmware after replacing the BGA board. Otherwise, the normal operation cannot be performed.
Be sure to write the latest firmware after replacing the BGA board. Otherwise, the normal operation cannot be performed.
Version Upgrade:
Perform the version upgrade when the functional upgrade (firmware version upgrade) is required.
Perform the version upgrade when the functional upgrade (firmware version upgrade) is required.
[Procedure of firmware writing and version upgrade]
1.
Download the latest firmware (hereafter referred to as firmware) from the ESI homepage.
2.
Copy the firmware (downloaded and uncompressed folder) to the root directory of the memory stick.
3.
Insert the memory stick into the memory stick slot of this unit.
4.
Insert one end of the power cord into the AC adapter (AC-S2425) supplied with this unit and insert the other end of the power cord into
the receptacle.
the receptacle.
5.
Insert the DC plug of the supplied AC adapter into the DC-IN terminal of this unit.
6.
While pressing the [PRINT] button, press the [ON/STANDBY| button.
7.
Release your finger from the button when the ACCESS LED and the PRINT LED start flashing.
8.
After several minutes, check that the ACCESS LED and PRINT LED change to stay lit.
(Completion of firmware writing or version upgrade)
(Completion of firmware writing or version upgrade)
9.
Press the PRINT button to turn off the power.
10. Remove the memory stick.
11. While pressing the [ENTER] and [CANCEL] buttons simultaneously, press the [ON/STANDBY| button. (Service mode starts.)
12. Release all buttons when the initial screen of the service mode is displayed on the LCD display.
13. Check that the CHECKSUM value (hexadecimal value) displayed on the screen is the same as the value of the firmware version shown
11. While pressing the [ENTER] and [CANCEL] buttons simultaneously, press the [ON/STANDBY| button. (Service mode starts.)
12. Release all buttons when the initial screen of the service mode is displayed on the LCD display.
13. Check that the CHECKSUM value (hexadecimal value) displayed on the screen is the same as the value of the firmware version shown
in ESI homepage.
14. Turn off the power and disconnect the power cord from the receptacle.
[Check and adjustment upon completion of version upgrade]
1.
While pressing the [ENTER] and [CANCEL] buttons simultaneously, press the [ON/STANDBY| button. (Service mode starts.)
2.
Release all buttons when the initial screen of the service mode is displayed on the LCD display.
1) Check the CHECKSUM: value.
1) Check the CHECKSUM: value.
Check that the CHECKSUM value (hexadecimal value) displayed on the screen is the same as the value of the firmware version
shown in ESI homepage.
shown in ESI homepage.
2) Check that the destination is not changed. (Destination is displayed by XX of “DPP-FP55 (XX)” on the topmost line of the service
mode screen.)
3) If destination is changed after version upgrade is completed, execute both items of destination change (as shown in [Procedure of
destination change] below) and LCD contrast adjustment (VCOM).
For the procedure of the LCD contrast adjustment (VCOM), refer to Service Manual “SECTION 1-1-4. Adjustment after LCD
Replacement”.
For the procedure of the LCD contrast adjustment (VCOM), refer to Service Manual “SECTION 1-1-4. Adjustment after LCD
Replacement”.
4) For the procedure of the destination change, refer to the next paragraph [Procedure of destination change] shown below.
5. FIRMWARE WRITING AND VERSION UPGRADE
5-2E
DPP-FP55
[Procedure of destination change]
1.
While pressing the [ENTER] and [CANCEL] buttons simultaneously, press the [ON/STANDBY| button. (Service mode starts.)
2.
Release all buttons when the initial screen of the service mode is displayed on the LCD display.
3.
Press the [
r
] key several times to move the cursor to [Select Model], and press [ENTER].
4.
Move the cursor to the desired destination by using [
R
], [
r
], [
T
], [
t
], and press [ENTER].
5.
Press the [
R
] key several times to return to the initial screen (on which “DPP-FP55 (XX)” is displayed) of the service mode to confirm
that the destination is changed.
6.
Turn off the power and disconnect the power cord from the receptacle.
Revision History
DPP-FP55
Reverse
Ver.
1.0
1.1
1.2
1.3
1.4
Date
2006.05
2006.07
2006.07
2006.08
2007.08
History
Official Release
Supplement-1
(DI06-028)
(DI06-028)
Revised-1
Correction-1
Supplement-2
(DI07-063)
Contents
—
• Addition of firmware writing and version
upgrade methods
• Change of service note
• Change of supplied accessories
• Contents of Supplement-1 (9-852-118-82)
• Change of supplied accessories
• Contents of Supplement-1 (9-852-118-82)
are incorporated.
• Correction of electrical troubleshooting
• Correction of repair parts list
S.M. correction: Page
• Correction of repair parts list
S.M. correction: Page
2-1
,
4-1
of Revised-1
• Change of Exploded Views
• Revision of Accessories
S.M. correction: Page
• Revision of Accessories
S.M. correction: Page
4-5
S.M. Rev.
issued
—
No
Yes
Yes
Yes
985211815.pdf
