DOWNLOAD Sony DPP-FP30 Service Manual ↓ Size: 254.98 KB | Pages: 7 in PDF or view online for FREE

US Model

Canadian Model

AEP Model

UK Model

E Model

Australian Model

Supplied accessories

Paper tray (1)
CD-ROM (1)
AC  power adaptor (1)
AC  power cord (1)
Color print pack (1)
Operating Instructions (1)
Warranty (1)
Sony End User Software License Agreement (1)

Power requirements

AC  100 to 240 V, 50/60 Hz, 1.5 to 0.75 A

Rated output voltage

DC 24 V, 2.2 A

Operating temperature

5 ˚C to 35 ˚C (41 ˚F  to 95 ˚F )

Dimensions

Approx. 60 x 30.5 x 122 mm

(2 3/8 x 1 1/4 x 4 7/8 inches)
(w/h/d, excluding protruding parts)

Mass

Approx. 305 g (11 oz)

Design and specifications are subject to change without notice.
*1: In some regions, 3.5 x 5 inch size print paper is not sold.
*2: Some special file types are not compatible.
*3: “DCF” stands for Design rule for Camera File system.
*4: “Exif” is an image file format containing an image data added with

its thumbnail data for viewing, shot date data and the shooting
conditions data.

Printing method

Dye sublimation printing (Yellow/Magenta/Cyan 3 pass)

Resolution

300 dpi x 300 dpi

Image processing per dot

256 levels (8 bits for each Yellow/Magenta/Cyan),
approx. 16 770 000 colors

Printing size

Post Card (4 x 6 inch) size:

101.6 x 152.4 mm
(maximum,borderless)

3.5 x 5 inch size*1:

89 x 127 mm
(maximum, borderless)

Printing time (per sheet)

Post Card (4 x 6 inch) size:

approx. 90 seconds

3.5 x 5 inch size*1:

approx. 80 seconds

(excluding the time for data processing and data
transferring from the computer or digital camera.)

Input/Output connectors

USB connector (1)
PictBridge connector (1)

Compatible image file formats*2

JPEG: DCF*3 2.0 compatible, Exif*4 2.21 compatible

Maximum number of pixels to behandled

JPEG: 10 000 (H) x 7 500 (V) dots

Power requirements

DC IN jack, DC 24V
(On standby mode, less than 1W)

Operating temperature

5 ˚C to 35 ˚C (41 ˚F to 95 ˚F )

Dimensions

Approx. 175 x 60.5 x 137 mm
(7 x 2 1/2 x 5 1/2 inches)
(w/h/d, excluding protruding parts)
(400 mm (15 3/4 inches) of depth when the paper tray
is installed.)

Mass

Approx. 950g (2 lb 2 oz)
(excluding the 100 g (4 oz) paper tray)

2006I0500-1

  © 2006.9

2

!

This manual is intended for qualified service personnel only.
To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so. Refer all servicing to
qualified service personnel.

!

Die Anleitung ist nur für qualifiziertes Fachpersonal bestimmt.
Alle Wartungsarbeiten dürfen nur von qualifiziertem Fachpersonal ausgeführt werden. Um die
Gefahr eines elektrischen Schlages, Feuergefahr und Verletzungen zu vermeiden, sind bei
Wartungsarbeiten strikt die Angaben in der Anleitung zu befolgen. Andere als die angegeben
Wartungsarbeiten dürfen nur von Personen ausgeführt werden, die eine spezielle Befähigung
dazu besitzen.

!

Ce manual est destiné uniquement aux personnes compétentes en charge de l’entretien. Afin
de réduire les risques de décharge électrique, d’incendie ou de blessure n’effectuer que les
réparations indiquées dans le mode d’emploi à moins d’être qualifié pour en effectuer d’autres.
Pour toute réparation faire appel à une personne compétente uniquement.

3

1-1.

About the Spare Parts ..................................................................................... 4

1-2.

Unleaded Solder ............................................................................................. 4

2-1.

Notes on Repair Parts ..................................................................................... 5

2-2.

Exploded Views ............................................................................................. 6

2-3.

Packing Materials & Supplied Accessories ................................................... 7

4

Boards requiring use of unleaded solder are printed with a
lead free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come
printed with the lead free mark due to their particular size.)

 : LEAD FREE MARK

m
. Be sure to use the unleaded solder for the printed circuit

board printed with the lead free mark.

. The unleaded solder melts at a temperature about 40 dC

higher than the ordinary solder, therefore, it is recom-
mended to use the soldering iron having a  temperature
regulator.

. The ordinary soldering iron can be used but the iron tip

has to be applied to the solder joint for a slightly longer
time. The printed pattern (copper foil) may peel away if
the heated tip is applied for too long, so be careful.

When the parts other than those described in “Section 2
Spare Parts” need replacement, replace the unit (DPP-
FP30).