DOWNLOAD Sony DPP-F800 Service Manual ↓ Size: 2.35 MB | Pages: 8 in PDF or view online for FREE

Model
DPP-F800
Pages
8
Size
2.35 MB
Type
PDF
Document
Service Manual
Brand
Device
Service Manual / Other
File
dpp-f800.pdf
Date

Sony DPP-F800 Service Manual ▷ View online

DPP-F800
Sony Corporation
SERVICE MANUAL
Revision History
983451812.pdf
2011B29-1
  © 2011.02
Published by Sony Techno Create Corporation
Ver. 1.1  2011.02
DIGITAL PHOTO PRINTER/FRAME
9-834-518-12
Canadian Model
AEP Model
UK Model
East European Model
E Model
Russian Model
Chinese Model
Korea Model
Tourist Model
DPP-F800
Ver.
Date
History
Contents
S.M. Rev.
issued
1.0
2010.09
Official Release
1.1
2011.02
Revised-1
(A1 10-199)
•  Addition of Taiwan Model
•  Deletion of US Model
•  Correction of SAFETY CHECK-OUT
•  Change of ACCESSORIES
  S.M. revised: Top cover, 
Page 2
1-1
1-4
Yes
Revised-1
Replacement of the
previously issued
SERVICE MANUAL
9-834-518-11 with
this manual.
DPP-F800
– 2 –
SPECIFICATIONS
SAFETY-RELATED  COMPONENT  WARNING!!
COMPONENTS  IDENTIFIED  BY  MARK  0  OR  DOTTED  LINE  WITH 
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST 
ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPO-
NENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS 
SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY 
SONY. 
ATTENTION AU  COMPOSANT  AYANT  RAPPORT 
À  LA  SÉCURITÉ!
LES  COMPOSANTS  IDENTIFIÉS  PAR  UNE  MARQUE  0  SUR  LES 
DIAGRAMMES  SCHÉMATIQUES  ET  LA  LISTE  DES  PIÈCES  SONT 
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REM-
PLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT 
LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES 
SUPPLÉMENTS PUBLIÉS PAR SONY.
UNLEADED  SOLDER
This unit uses unleaded solder. 
Boards requiring use of unleaded solder are printed with the leadfree 
mark (LF) indicating the solder contains no lead.
(
Caution:  Some printed circuit boards may not come printed with the 
lead free mark due to their particular size.)
: LEAD FREE MARK
Be careful to the following points to solder or unsolder.
•  Set the soldering iron tip temperature to 350°C approximately.
 
If cannot control temperature, solder/unsolder at high temperature 
for a short time.
 
Caution: The printed pattern (copper foil) may peel away if the 
heated tip is applied for too long, so be careful!
 
 
Unleaded solder is more viscous (sticky, less prone to 
flow) than ordinary solder so use caution not to let solder 
bridges occur such as on IC pins, etc.
•  Be sure to control soldering iron tips used for unleaded solder and 
those for leaded solder so they are managed separately. Mixing un-
leaded solder and leaded solder will cause detachment phenomenon.
SAFETY  CHECK-OUT
After correcting the original service problem, perform the following 
safety checks before releasing the set to the customer.
1.  Check the area of your repair for unsoldered or poorly-soldered 
connections. Check the entire board surface for solder splashes and 
bridges.
2.  Check the interboard wiring to ensure that no wires are “pinched” 
or contact high-wattage resistors.
3.  Look for unauthorized replacement parts, particularly transistors, 
that were installed during a previous repair. Point them out to the 
customer and recommend their replacement.
4.  Look for parts which, through functioning, show obvious signs of 
deterioration. Point them out to the customer and recommend their 
replacement.
5.  Check the B+ voltage to see it is at the values specified.
6.  Flexible Circuit Board Repairing
 
•   Keep the temperature of the soldering iron around 350°C during 
repairing.
 
•   Do not touch the soldering iron on the same conductor of the circuit 
board (within 3 times).
 
•   Be careful not to apply force on the conductor when soldering or 
unsoldering.
MAIN FEATURES
The Sony DPP-F800 is a digital photo printer/frame for easily display-
ing images taken with a digital camera or other device, without using 
a computer.
x
Support for various memory cards
Supports  various  memory  cards,  such  as  a  “Memory  Stick”,  SD 
memory card, and xD-Picture Card. Just insert a memory card removed 
from a digital camera or other device, and you will be able to view 
the images immediately.
x
Various display functions
You can enjoy various viewing modes, such as the slideshow display, 
Clock  and  calendar  display,  Single  view  mode,  and  Index  image 
display.
x
Various slideshow styles
The displayed image can be switched automatically as though you are 
turning the pages of an album yourself. You can select from various 
slideshow styles, including the ones displaying a clock or calendar. 
You can also change playback settings such as the playback order. 
x
Importing images to internal memory
You can import and save the images in the internal memory. 
x
Exporting images
You can export images in the internal memory to your memory card. 
x
Sorting function
You can sort images by the date, folder, image orientation, and mark.
x
Automatic rotation of images
The photo frame automatically rotates images to their proper orienta-
tion. Images are also automatically rotated when the photo frame is 
set in either the portrait or landscape position.
x
Displaying images on a wall
You can hang the photo frame on the wall. 
x
Digital photo printer/frame
Printing method
Dye sublimation printing (yellow/
magenta/cyan 3 pass)
Print resolution
300 (H) dpi × 300 (V) dpi
Image processing per dot
256 Tones (8 bits each for yellow/
magenta/cyan)
Printing range
1,800 dots × 1,200 dots
Printing size
101.6 mm × 152.4 mm (4 × 6) in.
(maximum, borderless)
Printing speed (per sheet)
/Memory card
∗4
:
Approx. 63 sec.
Ink ribbon/Print paper
t
Please use a Sony optional color
print pack designed for this unit.
You cannot use other print packs.
LCD screen
LCD panel:
20 cm/8 inches, TFT active matrix
Total number of dots:
1,152,000 dots
(800 × 3 (RGB) × 480) dots
Effective display area
Display aspect ratio:
16:10
LCD screen area:
Approx. 19.3 cm/7.6 inches
Total number of dots:
1,069,080 dots
(755 × 3 (RGB) × 472) dots
LCD backlight life
20,000 hours
(before brightness of the backlight is
reduced to half)
Input/Output connectors
Slots
“Memory Stick” slot (Standard/Duo)/
SD memory card slot/
xD-Picture Card slot/MMC card slot
Compatible image file formats
JPEG: DCF 2.0 compatible, Exif 2.21
compatible, JFIF
∗6
TIFF: Exif 2.21 compatible
BMP
∗7
: 1, 4, 8, 16, 24, 32 bit Windows
format
(Some image file formats are not
compatible.)
Max. no. of pixels that can be displayed
and printed
8,000 (H) dots × 6,000 (V) dots
∗8
File system
FAT12/16/32
Image file name
DCF format, 256 characters within 5th
hierarchy
Maximum number of files that can be
handled
4,999 files in the internal memory or on
the memory card
Internal memory capacity
9
Approx. 256 MB
(Approx. 500 images
∗10
can be saved.)
Power requirements
DC IN jack, DC 24V
Power consumption
80 W (maximum)
On standby mode: less than 1 W
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Dimensions
Placed sideways:
Approx. 231 mm × 157 mm × 113 mm
(w/h/d)
(9 1/8 × 6 1/4 × 4 1/2) in.
Placed vertically:
Approx. 157 mm × 231 mm × 121 mm
(w/h/d)
(6 1/4 × 9 1/8 × 4 7/8) in.
Print position (flat):
LCD screen opened:
Approx. 231 mm × 208 mm × 154 mm
(w/h/d)
(9 1/8 × 8 1/4 × 6 1/8) in.
Depth with paper tray attached:
Approx. 301 mm (11 7/8) in.
LCD screen closed:
Approx. 231 mm × 88 mm × 157 mm
(w/h/d)
(9 1/8 × 3 1/2 × 6 1/4) in.
Depth with paper tray attached:
Approx. 310 mm (12 1/4) in.
Mass
Approx. 1.5 kg (3lb 4 7/8 oz)
(excluding the paper tray (Approx.
115g (4 oz), ink ribbon and AC
Adaptor)
Included accessories
• Digital photo printer/frame
• Remote control
• AC Adaptor
• Power cord
∗11
• Paper tray
• Cleaning cartridge
• Cleaning sheet
• CD-ROM (Windows Printer Driver
Software Ver.1.0 and PMB (Picture
Motion Browser) Ver.5.2)
• Operating Instructions
• Read This First
• About the Print Packs
• Warranty (In some regions, the warranty
is not supplied.)
• Sony End User Software License Agreement
AC Adaptor AC-S2422
Power requirements
-
100 V to 240 V, 50 Hz/60 Hz
1.5 A to 0.75 A
Rated output voltage
24 V 2.2 A
Peak 3.7 A - 9.2 s
Dimensions
Approx. 60 mm × 30.5 mm × 122 mm
(2 3/8 × 1 1/4 × 4 7/8) in.
(w/h/d)
(excluding the protruding parts and
cables)
Mass
Approx. 305 g (11 oz)
See the label of AC Adaptor for more details.
Design and specifications are subject to change
without notice.
Estimated No. of prints is about 2,000 sheets (P
size). For the total No. of prints, see [System
Information] in the Settings menu.
∗1
: Average time from the PRINT being pressed to the
printed paper coming out. (Time may vary with the
size and format of image data and operating
conditions.)
∗2
: Print settings: [Borders] is set to [Borderless],
[Date Print] is set to [OFF], and [Auto Fine Print7]
is set to [ON].
∗3
: Images shot on a Sony digital still camera with an
effective pixel count of approximately 12,100,000
(file size about 4.1 MB) and stored on the internal
memory with this unit set to [Resize] (file size
about 400 KB). (page64)
∗4
Duo”. Printed from the “Memory Stick PRO Duo”
in the slot of this unit.
∗5
: Excluding data processing and transferring time.
∗6
: Baseline JPEG with 4:4:4, 4:2:2, or 4:2:0 format
∗7
: You cannot use the Picture Motion Browser
(PMB) for printing.
∗8
: 17 dots or more are required both vertically and
horizontally. An image with an aspect ratio of 20:1
or more may not be displayed properly. Even if the
aspect ratio is less than 20:1, display problem may
occur in thumbnails, slideshow or other occasions.
∗9
: The capacity is calculated as 1 MB is equivalent to
1,000,000 bytes. The actual capacity is reduced as
files for management and applications are
included. Approximately 205MB.
∗10
∗11
: The number of stored images is an approximate
guide when resizing and importing images.
When resizing and importing images, they are
automatically resized to about 2,000,000 pixels.
This varies depending on the subject and shooting
conditions.
∗1 ∗2
Internal memory
∗3
PC
∗5
: Approx. 60 sec.
: Images in
*3
stored on a Sony “Memory Stick PRO
: The plug shape and specifications of the
power cord differ depending on the region
in which you purchased this unit.
USB connector (TypeB, Full-Speed USB)
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Dispose of used batteries according to the instructions.
The changed portions from
Ver.1.0 are shown in blue.
Ver.1.1 2011.02
DPP-F800
1-1
NOTE:
•  -XX, -X mean standardized parts, so they may have some differences from
 the original one.
•  Items marked “*” are not stocked since they are seldom required for routine
 service. Some delay should be anticipated when ordering these items.
•  The mechanical parts with no reference number in the exploded views are
 not supplied.
•  The mechanical parts with no reference number in the exploded views are
 not supplied.
Ref. No. 
Part No. 
Description
Ref. No. 
Part No. 
Description
  1 
4-267-160-01  SCREW M1.7X6 (BLACK)
  1 
4-267-160-11  SCREW M1.7X6 (WHITE)
  2 
4-266-289-01  SERVICE, NECK COVER (BLACK)
  2 
4-266-289-11  SERVICE, NECK COVER (WHITE)
  3 
4-167-920-01  SCREW +P M3X5
 
  4 
7-685-103-19  SCREW +P 2X5 TYPE2 NON-SLIT (BLACK)
  4 
7-685-103-14  SCREW +P 2X5 TYPE2 NON-SLIT (WHITE)
  5 
A-1803-090-A  SERVICE, LCD ASSY (Note4)
  6 
4-266-290-01  SERVICE, LCD SPONGE S (Note3)
  7 
4-266-291-01  SERVICE, LCD SPONGE L (Note3)
 
  8 
A-1803-088-A  SERVICE, FRONT PANEL ASSY B (BLACK) (Note1, 2)
  8 
A-1803-089-A  SERVICE, FRONT PANEL ASSY W (WHITE) (Note1, 2)
  9 
A-1803-097-A  SERVICE, LIGHT PIPE ASSY
  10 
4-266-317-01  SERVICE, REAR COVER NECK ASSY (BLACK)
  10 
4-266-317-11  SERVICE, REAR COVER NECK ASSY (WHITE)
1. EXPLODED VIEWS
•  Abbreviation
 CH  : Chinese model
 CND  : Canadian model
 EE  : East European model
 JE
: Tourist model
 KR  : Korea model
 RUS  : Russian model
 TW  : Taiwan model
ns: not supplied
The  components  identified  by  mark  0  or 
dotted line with mark 0 are critical for safety.
Replace only with part number specified.
Les composants identifiés par une marque 
0
 sont critiques pour la sécurité.
Ne les remplacer que par une pièce portant 
le numéro spécifié.
Note1
:
 
In case of the Front Panel Assy failure, contact your local 
              Sony Service Headquarter for the measures.
1-1.  LCD SECTION
Note3:  Refer to “Assembly-1: Putting position of the LCD Sponge S 
and the LCD Sponge L” when you assemble.
Note4:  Refer to “Assembly-2: Routing the harness of the LCD Assy” 
when you assemble.
Note5:  The light guide pipe is included in the Rear Cover Assy (Ref. 
              No.104 on page 1-3). 
Note
Note2:
 
Method for Removing the Front Panel Assy
(1) Remove two screws to remove the Neck Cover.
Neck Cover
Screw
(2) Open the LCD block and remove two screws. 
     
Remove the Front Panel Assy from the LCD block.
Screw
Rear Cover Assy
LCD block
2
3
4
5
 (Note4)
10
9
8
 (Note1, 2)
ns
(Note5)
ns
ns
ns
ns
7
 (Note3)
7
(Note3)
6
 (Note3)
6
 (Note3)
ns
Printer Section
(See Page 1-2)
4
3
4
1
4
3
Claw
Claw
Claw
Claw
Claw
Claw
The changed portions from
Ver.1.0 are shown in blue.
Ver.1.1 2011.02
DPP-F800
1-2
Note
ns: not supplied
1-2.  PRINTER SECTION
Ref. No. 
Part No. 
Description
Ref. No. 
Part No. 
Description
0
 51 
A-1803-096-A  SERVICE, MAIN PWB ASSY (Note3)
  52 
A-1803-112-A  SERVICE, DC IN BOARD ASSY (Note2)
  53 
7-685-103-14  SCREW +P 2X5 TYPE2 NON-SLIT (WHITE)
  53 
7-685-103-19  SCREW +P 2X5 TYPE2 NON-SLIT (BLACK)
0
 54 
A-1803-111-A  SERVICE, THERMAL PRINTER ASSY (Note1, 2)
  55 
4-266-320-01  SERVICE, RIBBON DOOR FRAME (BLACK) 
  55 
4-266-320-11  SERVICE, RIBBON DOOR FRAME (WHITE)
  56 
4-266-277-01  SERVICE, PAPER OUT DOOR (BLACK)
  56 
4-266-277-11  SERVICE, PAPER OUT DOOR (WHITE)
  57 
4-266-278-01  SERVICE, RIBBON DOOR (BLACK)
  57 
4-266-278-11  SERVICE, RIBBON DOOR (WHITE)
  58 
7-685-105-19  SCREW +P 2X8 TYPE2 NON-SLIT (BLACK)
  58 
7-685-105-11  TPG +P 2X8, TYPE 2, NON-SLIT (WHITE)
  59 
7-682-545-09  +B 3X4 (BLACK)
  59 
7-682-145-01  SCREW +P 3X4 (WHITE)
  60 
4-266-279-01  SERVICE, PAPER TRAY DOOR (BLACK)
  60 
4-266-279-11  SERVICE, PAPER TRAY DOOR (WHITE)
  61 
4-266-321-01  SERVICE, BOTTOM COVER (BLACK)
  61 
4-266-321-11  SERVICE, BOTTOM COVER (WHITE) 
Note1:  Refer to “Assembly-4: Method for installing the Thermal 
Printer Assy” when you assemble.
Note2:  Refer to “Assembly-5: Routing the cable and harnesses” 
when you assemble.
Note3:  Turn over the Main PWB Assy in the direction indicated with 
arrow and disconnect the cable, harnesses and flexible board 
from the connectors.
Main PWB Assy
Hinge Section
(See Page 1-3)
52
(Note2)
51
(Note3)
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
60
61
57
56
55
54
(Note1, 2)
53
58
59
Claw
Page of 8
Display

Sony DPP-F800 Service Manual ▷ Download

  • DOWNLOAD Sony DPP-F800 Service Manual ↓ Size: 2.35 MB | Pages: 8 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony DPP-F800 in PDF for free, which will help you to disassemble, recover, fix and repair Sony DPP-F800 Service Manual / Other. Information contained in Sony DPP-F800 Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.