DOWNLOAD Sony DPP-F700 Service Manual ↓ Size: 1.16 MB | Pages: 16 in PDF or view online for FREE

2-4

DPP-F700

Ref. No.

Part No.

Description

Ref. No.

Part No.

Description

101

4-167-001-01 PAPER TRAY DOOR (B), SERVICE

102

A-1750-719-A BOTTOM COVER ASSY (B), SERVICE

103

A-1750-717-A HINGE ASSY SERVICE

104

4-167-920-01 SCREW +P M3X5

105

A-1750-716-A POWER PWB ASSY, SERVICE (Note 1)

106

7-685-103-11 SCREW +P 2X5 TYPE2 NON-SLIT

107

4-166-997-01 FFC (POWER PWB) S, SERVICE

108

4-166-998-01 FFC (POWER PWB) L, SERVICE

109

A-1750-715-A MAIN PWB ASSY SERVICE (Note 1, 2)

110

4-166-995-01 CF CONNECTOR SHEET, SERVICE

111

4-141-829-01 SERVICE CARD CONNECTOR

112

4-141-820-01 SERVICE USB B CONNECTOR

ns: not supplied

113

4-166-996-01 DUO CONNECTOR SHEET, SERVICE

114

4-141-819-01 SERVICE CARD CONNECTOR

115

7-685-146-11 SCREW +P 3X8 TYPE2 NON-SLIT

116

7-621-770-87 SCREW +B 2.6X5

117

1-797-788-21 THERMAL PRINTER (Note 1, 3)

118

4-166-999-01 RIBBON DOOR FRAME (B), SERVICE

119

4-167-006-01 PAPER OUT DOOR (B), SERVICE

120

4-167-003-01 RIBBON DOOR (B), SERVICE

121

7-682-545-09 +B 3X4

122

A-1750-718-A FERRITE CORE ASSY (TP), SERVICE

123

4-167-848-01 SPONGE (TP), SERVICE

(Note 1)

(Note 1, 2)

(Note 1, 3)

ns

2-5E

DPP-F700

• Refer to page 2-1 for mark 

0

.

Note: This item is supplied with the unit as an accessory, but

is not prepared as a service part.

Cleaning Cartridge
(Used for cleaning inside the printer.)

X-2055-849-2

CD-ROM
(Windows Printer Driver Software Ver. 1.0
and PMB (Picture Motion Browser) Ver. 4.3)

4-163-768-01

Cleaning Sheet
(Used for cleaning inside the printer.)

3-094-075-02

Remote Control (RMT-DPF4)

4-157-802-01

Paper Tray cover

(Note)

Tray adaptor

(Note)

Tray (lower) (CH)
Tray (lower P) (EXCEPT CH)

(Note)

Tray Sheet

2-190-622-01

Paper Tray

A-1252-126-A (EXCEPT CH)
A-1512-250-A (CH)

AC Adaptor (AC-S2422)

0

1-480-108-41

AC Power Cord

0

1-555-074-91 (AUS)

0

1-827-269-41 (UK, HK)

0

1-829-810-21 (US, CND)

0

1-832-121-31 (CH)

0

1-834-482-21 (AEP, EE, RUS, E)

0

1-834-852-11 (TW)

Conversion (2P) Adaptor

0

1-569-008-33 
(E: Central & South America)

Operating Instructions

・ 

(Only for destination Japanese model)

   日本語・英語・中国語のみ部品供給可能です。

*

4-155-700-11 (ENGLISH)

*

4-155-700-21 (FRENCH)

*

4-155-700-31 (GERMAN)

*

4-155-700-41 (DUTCH)

*

4-155-700-51 (ITALIAN)

*

4-155-700-61 (SPANISH)

*

4-155-700-71 (PORTUGUESE)

*

4-155-700-81 (RUSSIAN)

*

4-155-700-91 (UKRAINIAN)

*

4-155-702-11 (ARABIC)

*

4-155-702-21 (PERSIAN)

*

4-155-702-41 (SIMPLIFIED CHINESE) (HK)

*

4-155-702-51 (TRADITIONAL CHINESE)

*

4-155-702-61 (SIMPLIFIED CHINESE) (CH)

Read This First

(Note)

Stand

4-164-967-01

3-1

DPP-F700

Set the destination when the MAIN PWB ASSY SERVICE was
replaced.

1. Plug the AC adaptor attached to the set into the DC IN 24V

terminal on the rear panel of the set and insert the power cord
into the socket.

2. All of the LEDs on the operation panel light up for three to

five seconds.

3. After confirming that the LEDs have turned off, press the

[MENU] button, the [ENTER] button, and the [PRINT] but-
ton simultaneously.

4. The default settings screen (Fig. 3-1-1) is displayed.

5. Check that the model name displayed on the side of “Model”

name meets the following:
DPP-F700

6. Red characters of “Destination” show default setting of this

set.
(Fig. 3-1-1 shows that the destination has been set to U2)
Using [

V] [v] [b] [B] buttons, move a yellow frame to the

destination to be set. (Fig. 3-1-1 shows that J1 has been se-
lected as destination.)

7. Press the [ENTER] button, and the characters will change to

red, indicating that the selected destination was set. (Fig. 3-1-
2)

8. With a yellow frame moved to “Restore all setting”, press the

[ENTER] button. (Fig. 3-1-3)

9. The screen becomes yellow and the setting is complete.

10. With yellow screen displayed, unplug the AC adaptor from

the DC IN 24V terminal.

11. Plug the AC adaptor into the DC IN 24V terminal and turn on

the power.

12. Press the [MENU] button to display the Settings menu, and

select “Initialize” to execute. (Fig. 3-1-5)

After the destination has been changed, text on the
screen is displayed in the default language. “Initialize”
is the eighth item from the top in the Settings menu.

3-2E

DPP-F700

13. Select “Initialize settings” of “Initialize” to execute. (Fig. 3-1-

6)

“Initialize settings” is the second item from the top.

14. Select “Yes” to execute, and “Completed” will be displayed,

indicating that all the default settings have completed. (Fig. 3-
1-7)

1. Press the [MENU] button to display the menu, and if the lan-

guage you selected is set, the setting has completed.