Sony DPF-HD1000 / DPF-HD700 / DPF-HD800 Service Manual ▷ View online
DPF-HD700/HD800/HD1000
– 5 –
1-3. DPF-HD1000
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
101
A-1843-082-A FRONT CASE ASSY B SERVICE (BLACK)
101
A-1843-083-A FRONT CASE ASSY W SERVICE (WHITE)
102
A-1843-080-A MAIN BOARD, COMPLETE (for SERVICE)
103
3-080-205-21
SCREW, TAPPING, P2 (SILVER) (for WHITE)
103
3-080-206-21
SCREW, TAPPING, P2 (BLACK) (for BLACK)
104
4-295-882-01 VIEW
BUTTON
B SERVICE (VIEW MODE, 1) (BLACK)
104
4-295-882-11
VIEW BUTTON W SERVICE (VIEW MODE, 1) (WHITE)
105
4-295-883-01
LIGHT GUIDE (STAND-BY) SERVICE
106
A-1843-084-A REAR CASE ASSY B SERVICE (BLACK)
106
A-1843-085-A REAR CASE ASSY W SERVICE (WHITE)
107
4-295-881-01
ENTER BUTTON B SERVICE (BLACK)
107
4-295-881-11
ENTER BUTTON W SERVICE (WHITE)
108
4-295-884-01
4 DIRECTION BUTTON B SERVICE
(b, v, B, V, MENU, BACK) (BLACK)
108
4-295-884-11
4 DIRECTION BUTTON W SERVICE
(b, v, B, V, MENU, BACK) (WHITE)
109
9-913-402-43
POLYIMIDE SHEET, t=0.075 (for SERVICE)
110
J-2501-274-A
FIRAMENT TAPE (12 mm) (T0.18 mm) (for SERVICE)
IR901
A-1843-090-A IR RECEIVER ASSY SERVICE
J602
4-141-818-01
SERVICE DC JACK (DC IN 5V
)
LCD901 A-1843-081-A LCD
ASSY
SERVICE
LP901
A-1843-091-A LOGO PIPE ASSY SERVICE
SP901 A-1843-089-A SPEAKER
ASSY
SERVICE
Note
Note1:
Follow the disassembly procedure in the numerical order given.
3 two claws
3 two claws
4 Remove all claws while rounding in outer.
3 three claws
3 three claws
5
6 front case assy
– Rear bottom view –
– Front bottom view –
1 two tapping screws
(P2)
1 two tapping screws
(P2)
JIG
When disassembling the set,
use the following jig.
Part No. 9-913-402-33 Tool for Disassembly
use the following jig.
Part No. 9-913-402-33 Tool for Disassembly
2 Insert the jig in the space between the front
cover and the rear cover assy and remove.
Note: Please spread a sheet under a
unit not to injure front panel.
Note2: Position where speaker assy (SP901)
is installed.
Match the ditch of the speaker
assy (SP901) to the rib of the
rear case.
assy (SP901) to the rib of the
rear case.
Note7: The mount parts other than DC jack
cannot exchange it alone. When the
mount parts other than DC jack are
defective, exchange the complete
mounted board.
mount parts other than DC jack are
defective, exchange the complete
mounted board.
Note3: How to install the MAIN board.
1 Insert two USB jacks
in the rear case.
MAIN board
2
Note4: Position where logo pipe assy (LP901)
is installed.
Match the ditch of the corner of the logo pipe
assy (LP901) tothe rib of the rear case.
assy (LP901) tothe rib of the rear case.
Note5: Please cut out and use POLYIMIDE
SHEET for a specified size when you
exchange it for new parts.
exchange it for new parts.
As for this part, the material or thickness
might be different compared with before.
might be different compared with before.
However, there is no obstacle at all.
50 mm
35 mm
20 mm
18 mm
Note6: Please cut out and use FIRAMENT
TAPE for a specified size when you
exchange it for new parts.
exchange it for new parts.
As for this part, the material or
thickness might be different compared
with before.
thickness might be different compared
with before.
However, there is no obstacle at all.
30 mm
12 mm
LCD901
MAIN board
IR901
J602
103
103
104
105
107
108
103
LP901
(Note 4)
(Note 4)
SP901
(Note 2)
(Note 2)
101
(Note 1)
106
(Note 1)
102
(Note 3, 7, 8)
109
(Note 5)
110
(Note 6)
Note8: When the MAIN board in this
unit is replaced, it is necessary
to set destination. Execute the
setting of destination referring to
“DESTINATION SETTING” (page 6).
to set destination. Execute the
setting of destination referring to
“DESTINATION SETTING” (page 6).
DPF-HD700/HD800/HD1000
– 6 –
Ref. No.
Part No.
Description
4-293-879-01 CD-ROM
(Digital Photo Frame Handbook) (EXCEPT CH)
4-295-276-01
MANUAL, INSTRUCTION (Read This First)
(JAPANESE) (JE)
4-295-276-11
MANUAL, INSTRUCTION (Read This First) (ENGLISH)
(US, CND, AEP, EE, E32, E33, E35, AUS, JE)
4-295-276-21
MANUAL, INSTRUCTION (Read This First) (FRENCH)
(CND, AEP)
4-295-276-31
MANUAL, INSTRUCTION (Read This First) (GERMAN)
(AEP)
4-295-276-41
MANUAL, INSTRUCTION (Read This First) (DUTCH)
(AEP)
4-295-276-51
MANUAL, INSTRUCTION (Read This First) (ITALIAN)
(AEP)
4-295-276-62
MANUAL, INSTRUCTION (Read This First) (SPANISH)
(AEP, E33)
4-295-276-71
MANUAL, INSTRUCTION (Read This First)
(PORTUGUESE) (AEP, E33, BR)
4-295-276-81
MANUAL, INSTRUCTION (Read This First) (RUSSIAN)
(EE)
4-295-276-91
MANUAL, INSTRUCTION (Read This First)
(UKRAINIAN) (EE)
4-295-277-11
MANUAL, INSTRUCTION (Read This First) (ARABIC)
(E32, E35)
4-295-277-21
MANUAL, INSTRUCTION (Read This First) (PERSIAN)
(E32)
4-295-277-31
MANUAL, INSTRUCTION (Read This First) (KOREAN)
(KR, JE)
4-295-277-41
MANUAL, INSTRUCTION (Read This First)
(SIMPLIFIED CHINESE) (E35, CH, JE)
4-295-277-51
MANUAL, INSTRUCTION (Read This First)
(TRADITIONAL CHINESE) (E35, TW)
4-295-279-41
HANDBOOK (Digital Photo Frame Handbook)
(SIMPLIFIED CHINESE) (CH)
501
1-489-909-21 REMOTE
COMMANDER
(RMT-DPF10) (Remote control)
502
4-294-035-01
STAND (for BLACK, RED) (DPF-HD700)
502
4-294-035-11
STAND (for WHITE) (DPF-HD700)
502
4-294-036-01
STAND (for BLACK) (DPF-HD800)
502
4-294-036-11
STAND (for WHITE) (DPF-HD800)
502
4-294-037-01
STAND (for BLACK) (DPF-HD1000)
502
4-294-037-11
STAND (for WHITE) (DPF-HD1000)
0 503
1-489-919-
33
ADAPTOR, AC (AC-P5022C1) (for WHITE) (CH)
0 503
1-489-919-
62
ADAPTOR, AC (AC-P5022F1) (for WHITE)
(E32, E33
: DPF-HD1000
)
0 503
1-489-919-
82
ADAPTOR, AC (AC-P5022H1) (for WHITE) (E35)
0 503
1-489-920-
12
ADAPTOR, AC (AC-P5022A) (for BLACK)
(US, CND, TW, JE)
0 503
1-489-920-
33
ADAPTOR, AC (AC-P5022C) (for BLACK) (CH)
0 503
1-489-920-
42
ADAPTOR, AC (AC-P5022D) (for BLACK) (KR)
0 503
1-489-920-
52
ADAPTOR, AC (AC-P5022E) (for BLACK) (AUS)
0 503
1-489-920-
62
ADAPTOR, AC (AC-P5022F) (for BLACK, RED)
(EE, E32, E33)
0 503
1-489-920-
82
ADAPTOR, AC (AC-P5022H) (for BLACK, RED) (E35)
0 503
1-489-920-
92
ADAPTOR, AC (AC-P5022I) (for BLACK) (BR)
0 503
1-492-088-61
ADAPTOR, AC (AC-P5022F1) (for WHITE)
(AEP, E33: DPF-HD800)
0 503
1-492-089-61
ADAPTOR, AC (AC-P5022F) (for BLACK) (AEP)
0 504
1-569-007-31
ADAPTOR, CONVERSION 2P (JE)
0 504
1-569-008-14
ADAPTOR, CONVERSION 2P (E33)
• Abbreviation
AUS :
AUS :
Australian
model
BR
: Brazilian model
CH
: Chinese model
CND : Canadian model
E32 : E model (Except Middle East, Hong Kong, Korean and Chinese etc.)
E33 : Latin American model
E35 : Middle East and Hong Kong models
EE
E32 : E model (Except Middle East, Hong Kong, Korean and Chinese etc.)
E33 : Latin American model
E35 : Middle East and Hong Kong models
EE
: East European model
JE :
Tourist
model
KR
: Korea model
TW :
Taiwan
model
2. ACCESSORIES
502
Stand
501
Remote control
504
Conversion adaptor
(Latin American model)
(Latin American model)
504
Conversion adaptor
(Tourist model)
(Tourist model)
503
AC adaptor
The components identifi ed by mark 0
or dotted line with mark 0 are critical for
safety.
Replace only with part number specifi ed.
or dotted line with mark 0 are critical for
safety.
Replace only with part number specifi ed.
Les composants identifi és par une marque
0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce por-
tant le numéro spécifi é.
0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce por-
tant le numéro spécifi é.
Ver. 1.2 2013.01
The changed portions from
Ver. 1.1 are shown in blue.
Ver. 1.1 are shown in blue.
NOTE THE COMPLETE MAIN BOARD REPLACING
When the complete MAIN board is replaced, set the destination refer-
ring to the following.
ring to the following.
Procedure:
1. Plug the AC adapter attached to the unit into the DC IN 5V terminal
1. Plug the AC adapter attached to the unit into the DC IN 5V terminal
on the rear panel of the unit.
(Do not insert the power cord into the socket yet)
2. While the [BACK] and [MENU] buttons are pressing, insert the
power cord into the socket, and when the default setting screen (Fig.
1) appears, release the [BACK] and [MENU] buttons.
1) appears, release the [BACK] and [MENU] buttons.
Fig. 1
Model:
CED
CEP
CEU
E33
E32
AU3
KR2
CN9
TW6
AR2
BR4
Restore all settings Import demo&logo
-
Import IM -
XXXXXXXXX
XXXXXXXXX
U2
CA2
CEK
Destination:
LCD:
E35
J1
NN
N
JE3
DPF-XXXXX
3. Red characters of “Destination” show default setting of this set.
(Fig. 1 shows that the destination has been set to J1.)
Using
[V] [v] [B] [b] buttons, move a yellow frame to the destination
to be set. (Fig. 1 shows that U2 has been selected as destination.)
4. Press the [ ] button, and the characters will change to red,
indicating that the selected destination was set. (Fig. 2)
Fig. 2
Model:
CED
CEP
CEU
E33
E32
AU3
KR2
CN9
TW6
AR2
BR4
XXXXXXXXX
XXXXXXXXX
U2
CA2
CEK
Destination:
LCD:
E35
J1
NN
N
JE3
DPF-XXXXX
Restore all settings Import demo&logo
-
Import IM -
5. With a yellow frame moved to “Restore all settings”, press the
[ ] button. (Fig. 3)
Fig. 3
Model:
CED
CEP
CEU
E33
E32
AU3
KR2
CN9
TW6
AR2
BR4
XXXXXXXXX
XXXXXXXXX
U2
CA2
CEK
Destination:
LCD:
E35
J1
NN
N
JE3
DPF-XXXXX
Restore all settings Import demo&logo
-
Import IM -
3. DESTINATION SETTING
6. The screen becomes green and the setting is complete. (Fig. 4)
Fig. 4
7. With green screen displayed, unplug the AC adapter from the DC
IN 5V terminal.
DPF-HD700/HD800/HD1000
– 6 –
Ref. No.
Part No.
Description
4-293-879-01 CD-ROM
(Digital Photo Frame Handbook) (EXCEPT CH)
4-295-276-01
MANUAL, INSTRUCTION (Read This First)
(JAPANESE) (JE)
4-295-276-11
MANUAL, INSTRUCTION (Read This First) (ENGLISH)
(US, CND, AEP, EE, E32, E33, E35, AUS, JE)
4-295-276-21
MANUAL, INSTRUCTION (Read This First) (FRENCH)
(CND, AEP)
4-295-276-31
MANUAL, INSTRUCTION (Read This First) (GERMAN)
(AEP)
4-295-276-41
MANUAL, INSTRUCTION (Read This First) (DUTCH)
(AEP)
4-295-276-51
MANUAL, INSTRUCTION (Read This First) (ITALIAN)
(AEP)
4-295-276-62
MANUAL, INSTRUCTION (Read This First) (SPANISH)
(AEP, E33)
4-295-276-71
MANUAL, INSTRUCTION (Read This First)
(PORTUGUESE) (AEP, E33, BR)
4-295-276-81
MANUAL, INSTRUCTION (Read This First) (RUSSIAN)
(EE)
4-295-276-91
MANUAL, INSTRUCTION (Read This First)
(UKRAINIAN) (EE)
4-295-277-11
MANUAL, INSTRUCTION (Read This First) (ARABIC)
(E32, E35)
4-295-277-21
MANUAL, INSTRUCTION (Read This First) (PERSIAN)
(E32)
4-295-277-31
MANUAL, INSTRUCTION (Read This First) (KOREAN)
(KR, JE)
4-295-277-41
MANUAL, INSTRUCTION (Read This First)
(SIMPLIFIED CHINESE) (E35, CH, JE)
4-295-277-51
MANUAL, INSTRUCTION (Read This First)
(TRADITIONAL CHINESE) (E35, TW)
4-295-279-41
HANDBOOK (Digital Photo Frame Handbook)
(SIMPLIFIED CHINESE) (CH)
501
1-489-909-21 REMOTE
COMMANDER
(RMT-DPF10) (Remote control)
502
4-294-035-01
STAND (for BLACK, RED) (DPF-HD700)
502
4-294-035-11
STAND (for WHITE) (DPF-HD700)
502
4-294-036-01
STAND (for BLACK) (DPF-HD800)
502
4-294-036-11
STAND (for WHITE) (DPF-HD800)
502
4-294-037-01
STAND (for BLACK) (DPF-HD1000)
502
4-294-037-11
STAND (for WHITE) (DPF-HD1000)
0 503
1-489-919-
33
ADAPTOR, AC (AC-P5022C1) (for WHITE) (CH)
0 503
1-489-919-
62
ADAPTOR, AC (AC-P5022F1) (for WHITE)
(E32, E33
: DPF-HD1000
)
0 503
1-489-919-
82
ADAPTOR, AC (AC-P5022H1) (for WHITE) (E35)
0 503
1-489-920-
12
ADAPTOR, AC (AC-P5022A) (for BLACK)
(US, CND, TW, JE)
0 503
1-489-920-
33
ADAPTOR, AC (AC-P5022C) (for BLACK) (CH)
0 503
1-489-920-
42
ADAPTOR, AC (AC-P5022D) (for BLACK) (KR)
0 503
1-489-920-
52
ADAPTOR, AC (AC-P5022E) (for BLACK) (AUS)
0 503
1-489-920-
62
ADAPTOR, AC (AC-P5022F) (for BLACK, RED)
(EE, E32, E33)
0 503
1-489-920-
82
ADAPTOR, AC (AC-P5022H) (for BLACK, RED) (E35)
0 503
1-489-920-
92
ADAPTOR, AC (AC-P5022I) (for BLACK) (BR)
0 503
1-492-088-61
ADAPTOR, AC (AC-P5022F1) (for WHITE)
(AEP, E33: DPF-HD800)
0 503
1-492-089-61
ADAPTOR, AC (AC-P5022F) (for BLACK) (AEP)
0 504
1-569-007-31
ADAPTOR, CONVERSION 2P (JE)
0 504
1-569-008-14
ADAPTOR, CONVERSION 2P (E33)
• Abbreviation
AUS :
AUS :
Australian
model
BR
: Brazilian model
CH
: Chinese model
CND : Canadian model
E32 : E model (Except Middle East, Hong Kong, Korean and Chinese etc.)
E33 : Latin American model
E35 : Middle East and Hong Kong models
EE
E32 : E model (Except Middle East, Hong Kong, Korean and Chinese etc.)
E33 : Latin American model
E35 : Middle East and Hong Kong models
EE
: East European model
JE :
Tourist
model
KR
: Korea model
TW :
Taiwan
model
2. ACCESSORIES
502
Stand
501
Remote control
504
Conversion adaptor
(Latin American model)
(Latin American model)
504
Conversion adaptor
(Tourist model)
(Tourist model)
503
AC adaptor
The components identifi ed by mark 0
or dotted line with mark 0 are critical for
safety.
Replace only with part number specifi ed.
or dotted line with mark 0 are critical for
safety.
Replace only with part number specifi ed.
Les composants identifi és par une marque
0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce por-
tant le numéro spécifi é.
0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce por-
tant le numéro spécifi é.
Ver. 1.2 2013.01
The changed portions from
Ver. 1.1 are shown in blue.
Ver. 1.1 are shown in blue.
NOTE THE COMPLETE MAIN BOARD REPLACING
When the complete MAIN board is replaced, set the destination refer-
ring to the following.
ring to the following.
Procedure:
1. Plug the AC adapter attached to the unit into the DC IN 5V terminal
1. Plug the AC adapter attached to the unit into the DC IN 5V terminal
on the rear panel of the unit.
(Do not insert the power cord into the socket yet)
2. While the [BACK] and [MENU] buttons are pressing, insert the
power cord into the socket, and when the default setting screen (Fig.
1) appears, release the [BACK] and [MENU] buttons.
1) appears, release the [BACK] and [MENU] buttons.
Fig. 1
Model:
CED
CEP
CEU
E33
E32
AU3
KR2
CN9
TW6
AR2
BR4
Restore all settings Import demo&logo
-
Import IM -
XXXXXXXXX
XXXXXXXXX
U2
CA2
CEK
Destination:
LCD:
E35
J1
NN
N
JE3
DPF-XXXXX
3. Red characters of “Destination” show default setting of this set.
(Fig. 1 shows that the destination has been set to J1.)
Using
[V] [v] [B] [b] buttons, move a yellow frame to the destination
to be set. (Fig. 1 shows that U2 has been selected as destination.)
4. Press the [ ] button, and the characters will change to red,
indicating that the selected destination was set. (Fig. 2)
Fig. 2
Model:
CED
CEP
CEU
E33
E32
AU3
KR2
CN9
TW6
AR2
BR4
XXXXXXXXX
XXXXXXXXX
U2
CA2
CEK
Destination:
LCD:
E35
J1
NN
N
JE3
DPF-XXXXX
Restore all settings Import demo&logo
-
Import IM -
5. With a yellow frame moved to “Restore all settings”, press the
[ ] button. (Fig. 3)
Fig. 3
Model:
CED
CEP
CEU
E33
E32
AU3
KR2
CN9
TW6
AR2
BR4
XXXXXXXXX
XXXXXXXXX
U2
CA2
CEK
Destination:
LCD:
E35
J1
NN
N
JE3
DPF-XXXXX
Restore all settings Import demo&logo
-
Import IM -
3. DESTINATION SETTING
6. The screen becomes green and the setting is complete. (Fig. 4)
Fig. 4
7. With green screen displayed, unplug the AC adapter from the DC
IN 5V terminal.
DPF-HD700/HD800/HD1000
– 6 –
Ref. No.
Part No.
Description
4-293-879-01 CD-ROM
(Digital Photo Frame Handbook) (EXCEPT CH)
4-295-276-01
MANUAL, INSTRUCTION (Read This First)
(JAPANESE) (JE)
4-295-276-11
MANUAL, INSTRUCTION (Read This First) (ENGLISH)
(US, CND, AEP, EE, E32, E33, E35, AUS, JE)
4-295-276-21
MANUAL, INSTRUCTION (Read This First) (FRENCH)
(CND, AEP)
4-295-276-31
MANUAL, INSTRUCTION (Read This First) (GERMAN)
(AEP)
4-295-276-41
MANUAL, INSTRUCTION (Read This First) (DUTCH)
(AEP)
4-295-276-51
MANUAL, INSTRUCTION (Read This First) (ITALIAN)
(AEP)
4-295-276-62
MANUAL, INSTRUCTION (Read This First) (SPANISH)
(AEP, E33)
4-295-276-71
MANUAL, INSTRUCTION (Read This First)
(PORTUGUESE) (AEP, E33, BR)
4-295-276-81
MANUAL, INSTRUCTION (Read This First) (RUSSIAN)
(EE)
4-295-276-91
MANUAL, INSTRUCTION (Read This First)
(UKRAINIAN) (EE)
4-295-277-11
MANUAL, INSTRUCTION (Read This First) (ARABIC)
(E32, E35)
4-295-277-21
MANUAL, INSTRUCTION (Read This First) (PERSIAN)
(E32)
4-295-277-31
MANUAL, INSTRUCTION (Read This First) (KOREAN)
(KR, JE)
4-295-277-41
MANUAL, INSTRUCTION (Read This First)
(SIMPLIFIED CHINESE) (E35, CH, JE)
4-295-277-51
MANUAL, INSTRUCTION (Read This First)
(TRADITIONAL CHINESE) (E35, TW)
4-295-279-41
HANDBOOK (Digital Photo Frame Handbook)
(SIMPLIFIED CHINESE) (CH)
501
1-489-909-21 REMOTE
COMMANDER
(RMT-DPF10) (Remote control)
502
4-294-035-01
STAND (for BLACK, RED) (DPF-HD700)
502
4-294-035-11
STAND (for WHITE) (DPF-HD700)
502
4-294-036-01
STAND (for BLACK) (DPF-HD800)
502
4-294-036-11
STAND (for WHITE) (DPF-HD800)
502
4-294-037-01
STAND (for BLACK) (DPF-HD1000)
502
4-294-037-11
STAND (for WHITE) (DPF-HD1000)
0 503
1-489-919-
33
ADAPTOR, AC (AC-P5022C1) (for WHITE) (CH)
0 503
1-489-919-
62
ADAPTOR, AC (AC-P5022F1) (for WHITE)
(E32, E33
: DPF-HD1000
)
0 503
1-489-919-
82
ADAPTOR, AC (AC-P5022H1) (for WHITE) (E35)
0 503
1-489-920-
12
ADAPTOR, AC (AC-P5022A) (for BLACK)
(US, CND, TW, JE)
0 503
1-489-920-
33
ADAPTOR, AC (AC-P5022C) (for BLACK) (CH)
0 503
1-489-920-
42
ADAPTOR, AC (AC-P5022D) (for BLACK) (KR)
0 503
1-489-920-
52
ADAPTOR, AC (AC-P5022E) (for BLACK) (AUS)
0 503
1-489-920-
62
ADAPTOR, AC (AC-P5022F) (for BLACK, RED)
(EE, E32, E33)
0 503
1-489-920-
82
ADAPTOR, AC (AC-P5022H) (for BLACK, RED) (E35)
0 503
1-489-920-
92
ADAPTOR, AC (AC-P5022I) (for BLACK) (BR)
0 503
1-492-088-61
ADAPTOR, AC (AC-P5022F1) (for WHITE)
(AEP, E33: DPF-HD800)
0 503
1-492-089-61
ADAPTOR, AC (AC-P5022F) (for BLACK) (AEP)
0 504
1-569-007-31
ADAPTOR, CONVERSION 2P (JE)
0 504
1-569-008-14
ADAPTOR, CONVERSION 2P (E33)
• Abbreviation
AUS :
AUS :
Australian
model
BR
: Brazilian model
CH
: Chinese model
CND : Canadian model
E32 : E model (Except Middle East, Hong Kong, Korean and Chinese etc.)
E33 : Latin American model
E35 : Middle East and Hong Kong models
EE
E32 : E model (Except Middle East, Hong Kong, Korean and Chinese etc.)
E33 : Latin American model
E35 : Middle East and Hong Kong models
EE
: East European model
JE :
Tourist
model
KR
: Korea model
TW :
Taiwan
model
2. ACCESSORIES
502
Stand
501
Remote control
504
Conversion adaptor
(Latin American model)
(Latin American model)
504
Conversion adaptor
(Tourist model)
(Tourist model)
503
AC adaptor
The components identifi ed by mark 0
or dotted line with mark 0 are critical for
safety.
Replace only with part number specifi ed.
or dotted line with mark 0 are critical for
safety.
Replace only with part number specifi ed.
Les composants identifi és par une marque
0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce por-
tant le numéro spécifi é.
0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce por-
tant le numéro spécifi é.
Ver. 1.2 2013.01
The changed portions from
Ver. 1.1 are shown in blue.
Ver. 1.1 are shown in blue.
NOTE THE COMPLETE MAIN BOARD REPLACING
When the complete MAIN board is replaced, set the destination refer-
ring to the following.
ring to the following.
Procedure:
1. Plug the AC adapter attached to the unit into the DC IN 5V terminal
1. Plug the AC adapter attached to the unit into the DC IN 5V terminal
on the rear panel of the unit.
(Do not insert the power cord into the socket yet)
2. While the [BACK] and [MENU] buttons are pressing, insert the
power cord into the socket, and when the default setting screen (Fig.
1) appears, release the [BACK] and [MENU] buttons.
1) appears, release the [BACK] and [MENU] buttons.
Fig. 1
Model:
CED
CEP
CEU
E33
E32
AU3
KR2
CN9
TW6
AR2
BR4
Restore all settings Import demo&logo
-
Import IM -
XXXXXXXXX
XXXXXXXXX
U2
CA2
CEK
Destination:
LCD:
E35
J1
NN
N
JE3
DPF-XXXXX
3. Red characters of “Destination” show default setting of this set.
(Fig. 1 shows that the destination has been set to J1.)
Using
[V] [v] [B] [b] buttons, move a yellow frame to the destination
to be set. (Fig. 1 shows that U2 has been selected as destination.)
4. Press the [ ] button, and the characters will change to red,
indicating that the selected destination was set. (Fig. 2)
Fig. 2
Model:
CED
CEP
CEU
E33
E32
AU3
KR2
CN9
TW6
AR2
BR4
XXXXXXXXX
XXXXXXXXX
U2
CA2
CEK
Destination:
LCD:
E35
J1
NN
N
JE3
DPF-XXXXX
Restore all settings Import demo&logo
-
Import IM -
5. With a yellow frame moved to “Restore all settings”, press the
[ ] button. (Fig. 3)
Fig. 3
Model:
CED
CEP
CEU
E33
E32
AU3
KR2
CN9
TW6
AR2
BR4
XXXXXXXXX
XXXXXXXXX
U2
CA2
CEK
Destination:
LCD:
E35
J1
NN
N
JE3
DPF-XXXXX
Restore all settings Import demo&logo
-
Import IM -
3. DESTINATION SETTING
6. The screen becomes green and the setting is complete. (Fig. 4)
Fig. 4
7. With green screen displayed, unplug the AC adapter from the DC
IN 5V terminal.
Display