Sony DPF-E72 Service Manual ▷ View online
– 5 –
DPF-E72
Set the destination when the MAIN PWB ASSY SERVICE was
replaced.
replaced.
2-1.
HOW TO CHANGE THE DESTINATION
Procedure
1. Plug the AC adapter attached to the set into the DC IN 5V
terminal on the rear panel of the set and insert the power cord
into the socket.
Press the 1 (on/standby) button to turn off the power once.
(The power switch LED on the set changes from green to or-
ange.)
into the socket.
Press the 1 (on/standby) button to turn off the power once.
(The power switch LED on the set changes from green to or-
ange.)
2. With the [VIEW MODE] button and [MENU] button pressed,
turn on the 1 (on/standby) button, and when the default set-
ting screen (Fig. 2-1-1) appears, release the [VIEW MODE]
button and [MENU] button.
ting screen (Fig. 2-1-1) appears, release the [VIEW MODE]
button and [MENU] button.
Fig. 2-1-1
3. Check that the model name displayed on the side of “Model”
name meets the following:
A2: DPF-E72
A2: DPF-E72
4. Red characters of “Destination” show default setting of this
set.
(Fig. 2-1-1 shows that the destination has been set to U2)
Using [
(Fig. 2-1-1 shows that the destination has been set to U2)
Using [
V] [v] [b] [B] buttons, move a yellow frame to the
destination to be set. (Fig. 2-1-1 shows that J1 has been se-
lected as destination.)
lected as destination.)
5. Press the [ENTER] button, and the characters will change to
red, indicating that the selected destination was set. (Fig. 2-1-
2)
2)
Fig. 2-1-2
6. With a yellow frame moved to “Restore all setting”, press the
[ENTER] button. (Fig. 2-1-3)
Fig. 2-1-3
7. The screen becomes green and the setting is complete.
Fig. 2-1-4
8. With green screen displayed, unplug the AC adapter from the
DC IN 5V terminal.
9. Plug the AC adapter into the DC IN 5V terminal and turn on
the power.
10. Press the [MENU] button to display the Settings menu, and
select “Initialize” to execute. (Fig. 2-1-5)
Fig. 2-1-5
SECTION 2
DESTINATION SETTING
Model:
A1
J1
U2
CED
E33
KR2
CEP
E32
CN9
CA2
CEU
AU3
TW6
CEK
E37
JE3
HK4
AR2
Restore all setting
Destination:
A2
Model:
A1
J1
U2
CED
E33
KR2
CEP
E32
CN9
CA2
CEU
AU3
TW6
CEK
E37
JE3
HK4
AR2
Restore all setting
Destination:
A2
Model:
A1
J1
U2
CED
E33
KR2
CEP
E32
CN9
CA2
CEU
AU3
TW6
CEK
E37
JE3
HK4
AR2
Restore all setting
Destination:
A2
Settings
Slideshow Settings
Auto power ON/OFF
Date/time settings
General Settings
System Information
Languege setting
Initialize
ENTER
BACK
/
: Select:
: SW.:
: End.
MENU
BACK
ENTER
– 6 –
DPF-E72
All settings will be returned
to factroy default.
Yes
No
MENU
BACK
ENTER
Initialize
Format internal memory
Reset
ENTER
BACK
/
: Select:
: Return.
MENU
BACK
ENTER
11. Select “Reset” of “Initialize” to execute. (Fig. 2-1-6)
Fig. 2-1-6
12. Select “Yes” to execute, and “Complete” will be displayed,
indicating that all the default settings have completed. (Fig. 2-
1-7)
1-7)
Fig. 2-1-7
2-2.
CONFIRMATION OF DESTINATION
1. Press the [MENU] button to display the menu, and if the lan-
guage you selected is set, the setting has completed.
Revision History
Reverse
DPF-E72
Ver.
1.0
1.1
Date
2009.02
2009.08
History
Official Release
Revised-1
(A1 09-200)
(A1 09-200)
Contents
—
• Revision of Exploded View
S.M. revised:
S.M. revised:
Page 3
S.M. Rev.
issued
—
Yes
985264912.pdf
Revision History
Reverse
DPF-E72
Ver.
1.0
1.1
Date
2009.02
2009.08
History
Official Release
Revised-1
(A1 09-200)
(A1 09-200)
Contents
—
• Revision of Exploded View
S.M. revised:
S.M. revised:
Page 3
S.M. Rev.
issued
—
Yes
985264912.pdf
Display
