DOWNLOAD Sony DPF-D70 Service Manual ↓ Size: 187.28 KB | Pages: 6 in PDF or view online for FREE

Model
DPF-D70
Pages
6
Size
187.28 KB
Type
PDF
Document
Service Manual
Brand
Device
Service Manual / Other
File
dpf-d70.pdf
Date

Sony DPF-D70 Service Manual ▷ View online

— 2 —
DPF-D70
1.
Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
 : LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40
°
C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
°
C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 
0
 OR DOTTED LINE WITH
MARK 
0
 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 
0
 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
MAIN FEATURES
The Sony DPF-D70 is a digital photo frame for easily displaying
images taken with a digital camera or other device without using a
computer.
 Support for various memory cards
Supports various memory cards used by digital cameras and other
devices, such as a “Memory Stick”, CompactFlash card, SD
memory card, and xD-Picture Card™.
Just insert a memory card removed from a digital camera or other
device, then you will be able to view the images immediately.
 Various modes
The displayed image can be switched automatically as though
you are turning the pages of an album yourself.
You can select from various modes including just images, clock,
and calendar view.
You can also change playback settings such as the display order.
 Various display functions
You can enjoy various view modes, such as displaying an analog
clock, digital clock or calendar. And the photo frame can display
images on single image display, index display, zoom in/zoom out
or fit to screen mode.
 Automatic rotation of images
The photo frame automatically rotates images to their proper
orientation. Images are also automatically rotated when the photo
frame is set in either the portrait or landscape position.
 Easy operation by remote control
 Adding images to internal memory
The images you add to the album are saved to internal memory.
 Exporting images
You can export images in the album to your memory card.
 Connecting to a computer to exchange the images
DPF-D70
1
2
5
5
3
6
7
4
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns: not supplied
SECTION 1
EXPLODED VIEWS
- 3 -
NOTE:
-XX and -X mean standardized parts, so they
may have some difference from the original one.
Items marked “
” are not stocked since they are
seldom required for routine service. Some delay
should be anticipated when ordering these items.
The mechanical parts with no reference number
in the exploded views are not supplied.
Ref. No.
Part No.
Description
Remarks
1
A-1546-161-A CASE ASSY, FRONT (BLACK)
1
A-1560-426-A CASE ASSY, FRONT (RED)
1
A-1560-428-A CASE ASSY, FRONT (BROWN)
2
A-1546-160-A CASE BLOCK ASSY, FRONT (BLACK)
2
A-1560-425-A CASE BLOCK ASSY, FRONT (RED)
2
A-1560-427-A CASE BLOCK ASSY, FRONT (BROWN)
3
A-1546-163-A CASE,ASSY, REAR
4
A-1546-162-B
CASE BLOCK ASSY, REAR
5
3-080-206-41 SCREW, TAPPING, P2
6
4-115-829-01 SERVICE FFC (54 PIN)
7
4-115-828-01 SERVICE FFC (10 PIN)
< ACCESSORIES >
1-480-757-11 REMOTE COMMANDER (RMT-DPF1)
(REMOTE CONTROL)
3-300-258-11 MANUAL, INSTRUCTION (ENGLISH)
(EXCEPT CH, TW, KR)
3-300-258-21 MANUAL, INSTRUCTION (FRENCH)
(CND, AEP)
3-300-258-31 MANUAL, INSTRUCTION (GERMAN) (AEP)
3-300-258-41 MANUAL, INSTRUCTION (DUTCH) (AEP)
3-300-258-51 MANUAL, INSTRUCTION (ITALIAN) (AEP)
3-300-258-61 MANUAL, INSTRUCTION (SPANISH) (AEP, E)
3-300-258-71 MANUAL, INSTRUCTION (PORTUGUESE)
(AEP, E)
3-300-258-81 MANUAL, INSTRUCTION (RUSSIAN)
(EE, RUS)
3-300-258-91 MANUAL, INSTRUCTION (UKRAINIAN)
(EE, RUS)
3-300-259-11 MANUAL, INSTRUCTION (ARABIC) (E)
3-300-259-21 MANUAL, INSTRUCTION (PERSIAN) (E)
3-300-259-31 MANUAL, INSTRUCTION (KORIAN) (KR)
3-300-259-41 MANUAL, INSTRUCTION
(SIMPLIFIED CHINESE) (HK, CH)
3-300-259-51 MANUAL, INSTRUCTION
(TRADITIONAL CHINESE) (HK, TW)
0
3-876-557-01 SERVICE PARTS AC (AC-P12V1)
(AC ADAPTOR) (US, CND, TW)
0
3-876-699-01 SERVICE PARTS AC (AC-P12V2)
(AC ADAPTOR) (UK, HK)
0
3-876-700-01 SERVICE PARTS AC (AC-P12V3)
(AC ADAPTOR) (AEP, EE, RUS,
E(Central and South America, Middle East))
0
3-876-701-01 SERVICE PARTS AC (AC-P12V4)
(AC ADAPTOR) (AUS)
0
3-876-702-01 SERVICE PARTS AC (AC-P12V5)
(AC ADAPTOR) (CH)
0
3-876-703-01 SERVICE PARTS AC (AC-P12V6)
(AC ADAPTOR) (KR)
0
3-876-704-01 SERVICE PARTS AC (AC-P12V7)
(AC ADAPTOR) (E(Southeast Asia))
Ref. No.
Part No.
Description
Remarks
The components identified by mark 
0
  or
dotted line with mark 
0
 are critical for safety.
Replace only with part number specified.
Les composants identifiés par une marque
0
 sont critiques pour la sécurité.
Ne les remplacer que par une pièce portant
le numéro spécifié.
• Abbreviation
AUS : Australian model
CH
: Chinese model
CND : Canadian model
EE
: East European model
HK
: Hong Kong model
KR
: Korea model
RUS : Russian model
TW
: Taiwan model
The changed portions from
Ver. 1.3 are shown in blue.
Ver. 1.4 2008.11
DPF-D70
- 4 -
2-1. METHOD OF UPGRADE OF FIRMWARE
Please executes when the enhance (upgrade of the firmware) is necessary.
Procedure
1.
Download the latest firmware from the ESI homepage.
2.
Copy the firmware (downloaded and decompressed two files) onto
the root directory (most significant hierarchy) of the Memory Stick of
8MB or more empty capacity.
3.
Install Memory Stick in the Memory Stick slot of this unit before
turning on the power supply.
4.
Connect AC adaptor of accesessory with this unit and push the power
button while pushing the [VIEW MODE] button.
5.
The screen becomes the confirmation display whether to do the
upgrade of the firmware.
Push the [ENTER] button.
6.
The upgrade of the firmware starts.
The power supply cuts automatically when ending.
7.
Remove Memory Stick from this unit.
2-2. CONFIRMATION OF VERSION AND
DESTINATION LANGUAGE SETTING
1.
Turn on power pushing the power button.
2.
Display the menu screen pushing the [MENU] button.
Note:
When the demonstration mode display is in the screen, make it to
“Date/time setting” display pushing the [MENU] button after the [c]
button of remote control.
3.
Choose "Various settings" with [
m] button, and push the ENTER
button.
SECTION 2
FIRMWARE UPGRADE
4.
Choose "System Information” display with [
m] button, and push the
ENTER button.
5.
Confirm it is a hoped firmware version, and push the [ENTER]
button.
6.
Confirm whether it is a display language that corresponds to
destination.
To change language, choose "Language settings"  and push the
ENTER button.
Destination
Language
Except E33, EE,
RUS, CH, TW
ENGLISH
E33
SPANISH
EE, RUS
RUSSIAN
CH
SIMPLIFIED CHINESE
TW
TRADITIONAL CHINESE
7.
Choice language and push the ENTER button.
To erase the menu display, pushing the MENU button.
• Abbreviation
E33 : Central & South America model
CH
: Chinese model
EE
: East European model
RUS : Russian model
TW
: Taiwan model
DPF-D70
2-3. FORMAT INTERNAL MEMORY
NOTE
All the images added to the internal memory will be deleted.
Do not format the internal memory by using connection to PC or
other external devices.
1.
Turn on power pushing the power button.
2.
Display the menu screen pushing the [MENU] button.
Note: 
When the demonstration mode display is in the screen, make it to
"Date/time setting" display pushing the [MENU] button after the [
c
]
button of remote control.
3.
Choose "Various settings" with [
m] button, and push the [ENTER]
button.
4.
Choose "Format internal memory" display with [
m] button, and push
the [ENTER] button.
5.
The screen of "Format internal memory? All images will be deleted."
appears.
Choose "Yes", and push the [ENTER] button.
6.
The screen of "Format internal memory completed." appears.
Choose "Yes", and push the [ENTER] button.
- 5 -
Page of 6
Display

Sony DPF-D70 Service Manual ▷ Download

  • DOWNLOAD Sony DPF-D70 Service Manual ↓ Size: 187.28 KB | Pages: 6 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony DPF-D70 in PDF for free, which will help you to disassemble, recover, fix and repair Sony DPF-D70 Service Manual / Other. Information contained in Sony DPF-D70 Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.