Sony SPK-WB Service Manual ▷ View online
SERVICE MANUAL
SPK-WB
WATERPROOF CASE
US Model
Canadian Model
AEP Model
SPK-WB
Ver. 1.1 2009.07
SPECIFICATIONS
Sony EMCS Co.
9-852-664-12
2009G0500-1
© 2009.7
Published by Tokai TEC
MAIN FEATURE
Material
Silicone, Plastic (PC, ABS), glass
Water-resistance
Silicone rubber, buckle
Pressure-resistance
To a depth of up to 3 m (10 feet) underwater
Switches that can be externally operated
ON/OFF(Power), Mode, Shutter, Smile Shutter, Zoom(W/T), Control, MENU,
Delete, Playback
Delete, Playback
Dimensions
Approx. 107 × 84 × 70 mm (4 1/4 × 3 3/8 × 2 7/8 in.) (w/h/d)
(excluding the projecting parts)
(excluding the projecting parts)
Mass
Approx. 165 g (5.9 oz.) (sports pack only)
Included items
Jacket case (1)
Lens/LCD cover (1)
Hand strap (1)
Anti-fogging lens solution (1)
Diff user (1)
Float (1)
Set of printed documentation
Lens/LCD cover (1)
Hand strap (1)
Anti-fogging lens solution (1)
Diff user (1)
Float (1)
Set of printed documentation
Design and specifi cations are subject to change without notice.
Useable at a depth of up to 3 m (10 feet) underwater.
Th
is sports pack SPK-WB (referred to below as “this unit”) is exclusively for use
with the Sony Digital Still Camera (referred to below as “camera”) DSC-W290/
W275/W270. (Not all cameras are available in all countries or regions.)
Th
W275/W270. (Not all cameras are available in all countries or regions.)
Th
e jacket case alone protects the camera from scratches.
Th
is unit takes photos in rainy weather, in water (to a depth of 3m (10 feet)) or in
poor-weather conditions such as in snow or rain, if the tight-fi tting hard case is
mounted aft er the jacket case is used.
mounted aft er the jacket case is used.
ˎ
ˎ
ˎ
Before using the camera in this unit, check that the camera is operating
properly and that the case is not leaking.
Before using the camera underwater, check around the jacket case opening
(
properly and that the case is not leaking.
Before using the camera underwater, check around the jacket case opening
(
Ȏ-ʓ) that there is no dirt, sand, hair, dust, salt, thread, cracks, skewing, or
scratches.
Do not scratch the jacket case opening when you store the jacket case.
In the unlikely event that a malfunction of this unit causes damage due to
water leakage, Sony does not guarantee against damages to the equipment
contained in it (camera, battery pack, etc.) and the recorded contents, nor
will bear any expenses relating to the captured photographs.
Do not scratch the jacket case opening when you store the jacket case.
In the unlikely event that a malfunction of this unit causes damage due to
water leakage, Sony does not guarantee against damages to the equipment
contained in it (camera, battery pack, etc.) and the recorded contents, nor
will bear any expenses relating to the captured photographs.
ˎ
ˎ
ˎ
ˎ
Revised-1
Replacement of the previously issued
SERVICE MANUAL 9-852-664-11
with this manual.
SERVICE MANUAL 9-852-664-11
with this manual.
– 2 –
SPK-WB
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
SECTION 1
EXPLODED VIEWS
1-1.
MAIN UNIT
NOTE:
• -XX and -X mean standardized parts, so they may
have some difference from the original one.
• Items marked “*” are not stocked since they are
seldom required for routine service. Some delay
should be anticipated when ordering these items.
should be anticipated when ordering these items.
• The mechanical parts with no reference number in
the exploded views are not supplied.
• Accessories are given in the last of the electrical
parts list.
1
4-135-010-01 TP2X8
2
4-135-007-01 RETAINER, LENS WINDOW
3
4-135-005-01 GLASS, LENS WINDOW
4
4-135-006-01 HOOD, LENS
5
4-135-004-01 CABINET, FRONT
6
4-135-008-01 ORNAMENT, LENS
7
4-135-009-01 TAPE, ORNAMENT DOUBLE STICK
8
4-135-003-01 CASE, SILICON
9
4-134-986-01 GEAR, MODE
(Note)
10
4-134-988-01 WASHER (A (TEFLON))
(Note)
11
4-134-985-01 KNOB, MODE
(Note)
12
4-135-015-01 BUCKLE (TOP)
13
4-135-011-01 CABINET, REAR
14
4-135-016-01 BUCKLE (BOTTOM)
15
4-134-990-01 RING, E
(Note)
16
4-135-013-01 SHAFT (B)
17
4-135-012-01 SHAFT (A)
0 18
4-134-987-01 O RING (P4)
(Note)
19
4-134-989-01 WASHER (B (SUS))
(Note)
20
4-135-014-01 RING, GRIP STOPPER
(Note)
The marked “0” are parts in relation
to waterproof.
Replace these components with Sony
parts.
Be sure to check up waterproof after
repair.
to waterproof.
Replace these components with Sony
parts.
Be sure to check up waterproof after
repair.
La 0 marquée sont des pièces par
rapport à imperméable à l’eau.
Ne les remplacer que par une pièce
portant le numéro spécifié.
Soyez sûr de vérifier vers le haut
d’imperméable à l’eau après la
réparation.
rapport à imperméable à l’eau.
Ne les remplacer que par une pièce
portant le numéro spécifié.
Soyez sûr de vérifier vers le haut
d’imperméable à l’eau après la
réparation.
•
Abbreviation
CND
CND
: Canadian model
1
2
4
3
5
14
6
6
7
7
8
9
(Note)
20
(Note)
A
A
10
(Note)
10
(Note)
18
(Note)
15
(Note)
11
(Note)
12
13
16
17
17
19
(Note)
Ver. 1.1 2009.07
The changed portions from
Ver. 1.0 are shown in blue.
Ver. 1.0 are shown in blue.
Note: When the corresponding parts are exchanged, refer to “1-3.
NOTE OF EXCHANGING OF MODE KNOB” on page 3.
– 3 –
SPK-WB
1-2.
ACCESSORIES
Anti-fogging Lens Solution
3-072-039-01
Diffuser
X-2345-652-1
Float
X-2102-750-1
Operating Instructions
4-131-599-11 (ENGLISH, FRENCH, SPANISH, DUTCH)
(US, CND, AEP)
4-131-599-21 (GERMAN, SWEDISH, ITALIAN, PORTUGUESE)
(AEP)
4-131-599-31 (RUSSIAN, ARABIC, TRADITIONAL CHINESE, KOREAN)
(AEP)
Hand Strap
2-591-542-21
Ver. 1.1 2009.07
1
O Ring (P4)
2
Washer (A (Teflon))
3
Mode Knob
4
Washer (A (Teflon))
5
Washer (B (SUS))
6
E Ring
7
Mode Gear
8
Grip Stopper Ring
Inside of Silicon Case
Silicon Case
Washer (A (Teflon))
It should be set in the center of
Mode Knob Shaft and No use
damaged one.
Mode Knob Shaft and No use
damaged one.
Grip Stopper Ring
Push Grip Stopper Ring all the way in.
∗
Make sure to order new one if you repair.
No reuse.
No reuse.
E Ring
Check the condition after set it.
•
Misalignment of Washer (A (Teflon)).
•
Washer (A (Teflon)) gets into Mode Knob Shaft.
Burr side of Washer (B (SUS)) should be attach on E Ring,
not do on Washer (A (Teflon)) side.
not do on Washer (A (Teflon)) side.
Mode (Knob) Shaft
Burr (E Ring) side
Glazed (Washer (A (Teflon))) side
Mode Knob Shaft
Mode Gear
Mode Knob Shaft
1-3.
NOTE OF EXCHANGING OF MODE KNOB
Please confirm the following notes, and install it in order of the number when you exchange the Mode Knob.
Revision History
Reverse
SPK-WB
Ver.
1.0
1.1
Date
2009.02
2009.07
History
Official Release
Revised-1
(A1 09-124)
(A1 09-124)
Contents
—
• Addition of “NOTE OF EXCHANGING
OF MODE KNOB”
S.M. revised:
Page 2
,
Page 3
S.M. Rev.
issued
—
Yes
985266412.pdf
Display