DOWNLOAD Sony HDR-TG1 / HDR-TG1E / HDR-TG3E (serv.man3) Service Manual ↓ Size: 683.15 KB | Pages: 42 in PDF or view online for FREE

6-36

HDR-TG1/TG1E/TG3E_ADJ

Click the [Switch Check] button on the SERVICE MODE screen,
and the “SWITCH CHECK” screen will appear.

Using method:
Click the [Start] button, and the switch check will start.
During execution of switch check, the pressed switch is displayed
in orange. Also, once the switch was pressed, its name characters
change to blue in color.

Click the [SERVICE MODE] button on the Main Menu screen, and
the “SERVICE MODE” screen in Fig. 6-2-2 will appear.

1

[To Menu] button
The Main Menu screen comes back.

2

[Switch Check] button
“SWITCH CHECK” screen appears.

3

[LED Check] button
“LED CHECK” screen appears.

4

[Jack Check] button
“JACK CHECK” screen appears.

5

[Lens Barrier Check] button
“LENS BARRIER CHECK” screen appears.

6

[Record Data] button
“RECORD DATA” screen appears.

7

[Test Pattern Output] button
“TEST PATTERN OUTPUT” screen appears.

1

2

3

4

5

6

7

6-37

HDR-TG1/TG1E/TG3E_ADJ

Click the [Jack Check] button on the SERVICE MODE screen,
and the “JACK CHECK” screen will appear.

Using method:
Click the [Start] button, and the jack check will start.
During execution of jack check, the connected jack is displayed in
orange.

The HDMI OUT jack is displayed in orange when it is con-
nected to a unit that supports HDMI.

Click the [LED Check] button on the SERVICE MODE screen,
and the “LED CHECK” screen will appear.

Using method:
LED ON or OFF can be controlled with [LED ON] or [LED OFF]
button on the screen.

6-38

HDR-TG1/TG1E/TG3E_ADJ

Click the [Record Data] button on the SERVICE MODE screen,
and the “RECORD DATA” screen will appear.

The record data such as use record and self-diagnostic record are
displayed.

Initializing method (Self-Diagnosis Data Only):
Click the [Clear Self-Diagnosis Data Only] button on the screen, and
the Self-Diagnosis Data will be initialized.

Initializing method (All Record-Data):
Click the [Clear All Recorded-Data] button on the screen, and the
All Recorded-Data will be initialized.

Performing the initialization causes all the user settings
including time setting to be initialized, too.

Click the [Lens Barrier Check]  button on the SERVICE MODE
screen, and the “LENS BARRIER CHECK” screen will appear.

Using method:
The lens barrier open or close can be controlled with [OPEN] or
[CLOSE] button on the screen.

6-39

HDR-TG1/TG1E/TG3E_ADJ

Click the [Test Pattern Output] button on the Service Mode screen,
and the “TEST PATTERN OUTPUT” screen will appear.

Using method:
1) Select the signal source of test patterns from the following

items and click it.
• Front-end (CAMERA SIGNAL PROCESSOR)

• Back-end (CAMERA SIGNAL PROCESSOR)

• D/A CONVERTER

2) If you clicked D/A CONVERTER, select the output type.

If “Component out” is selected, the test patterns are
also output to the LCD screen.

3) Select the type of test patterns and click it, and the signals will

be output.

4) Click the [Test Signal Cancel] button to cancel the signal out-

put.

5) Click [x] (Close button) on the right side of signal source dis-

play to return to the initial screen.

Frequent output/cancel of test signals may cause the
signal colors to be disordered. In such a case, turn
off and on the power of the camcorder.