DOWNLOAD Sony HDR-TD10 / HDR-TD10E (serv.man2) Service Manual ↓ Size: 7.58 MB | Pages: 25 in PDF or view online for FREE

Model
HDR-TD10 HDR-TD10E (serv.man2)
Pages
25
Size
7.58 MB
Type
PDF
Document
Service Manual
Brand
Device
Movie
File
hdr-td10-hdr-td10e-sm2.pdf
Date

Sony HDR-TD10 / HDR-TD10E (serv.man2) Service Manual ▷ View online

SERVICE MANUAL
HDR-TD10/TD10E_L2
SERVICE NOTE (Check the following note before the service.)
Revision History
Published by Sony Techno Create Corporation
Sony Corporation
LEVEL 
2
983458035.pdf
Ver. 1.4  2012.06
Digital HD Video Camera Recorder
The components identified by mark 
0 or dotted line with mark 0 are 
critical for safety.
Replace only with part number 
specified.
Les composants identifiés par une 
marque 
0 sont critiques pour la 
sécurité.
Ne les remplacer que par une 
pièce portant le numéro spécifié.
9-834-580-35
US Model
Canadian Model
AEP Model
North European Model
E Model
Australian Model
Hong Kong Model
Chinese Model
Korea Model
Tourist Model
Japanese Model
Ver.
Date
History
Contents
S.M. Rev.
issued
1.0
2011.03
Official Release
1.1
2011.04
Revised-1
(A1 11-014)
•  Revision of SERVICE NOTE.
 Page 
1-3
1-4
1-5
1-6
1-7
1-8
1-9
Yes
1.2
2011.11
Revised-2
(A2 11-294)
・ Revision of Top page.
・ Revision of SERVICE NOTE.
 Page 
1-5
1-10
Yes
1.3
2012.01
Revised-3
(A3 11-335)
・ Correction of EXPLODED VIEWS.
 Page 
2-6
Yes
1.4
2012.06
Revised-4
(A4 12-132)
・ Correction of REPAIR PARTS LIST.
 Page 
2-3
2-8
2-9
2-10
Yes
2012F08-1
  © 2012.06
– ENGLISH –
1-1. 
POWER SUPPLY DURING REPAIRS
1-2. 
PRECAUTION ON REPLACING THE VC-625 BOARD
1-3. SELF-DIAGNOSIS 
FUNCTION
1-4. 
METHOD OF COPING WITH SHIFT LENS ERROR
1-5. 
PRECAUTION ON REPLACING THE BOTTOM CABINET
1-6. 
3D EFFECT CHECK FLOW
1-7.  
PRECAUTION ON REPLACING THE LENS
‒ JAPANESE ‒
1-1. 
修理時の電源供給について
1-2. 
VC-625基板交換時の注意
1-3. 
自己診断機能
1-4. 
シフトレンズエラーの対処方法
1-5. 
ボトムキャビネット交換時の注意
1-6. 
3D効果確認手順
1-7.  
レンズ交換時の注意
Photo: HDR-TD10
HDR-TD10/TD10E
Revised-4
Replace the previously issued
SERVICE MANUAL 9-834-580-34
with this Manual.
– 2 –
HDR-TD10/TD10E_L2
SPECIFICATIONS
System
Signal format: PAL color, CCIR standards
 
HDTV 1080/50i 1080/50p specification
Movie recording format:
 HD:
 
3D: MVC (original format)
 
2D: MPEG-4 AVC/H.264 AVCHD format
 
compatible (1080/50p original format)
 STD: 
MPEG2-PS
Audio recording system:
 
Dolby Digital 2ch/5.1ch
 
Dolby Digital 5.1 Creator
Photo file format
 DCF 
Ver.2.0 
Compatible
 Exif 
Ver.2.3 
Compatible
 
MPF Baseline Compatible
Recording media (Movie/Photo)
 Internal 
memory
 64 
GB
 
“Memory Stick PRO Duo” media
 
SD card (Class 4 or faster)
 
When measuring media capacity, 1 GB equals
 
1 billion bytes, a portion of which is used for
 
system management and/or application files.
 
The capacity that a user can use is
 
approximately 63.9 GB.
Image device:
 
4.5 mm (1/4 type) CMOS sensor
 
Recording pixels (photo):
 
Max. 7 100 000 pixels
*1
 (3 072 × 2 304) (4:3)
 
Gross: Approx. 4 200 000 pixels
 
Effective (movie, 16:9)
*2
:
 
3D: Approx. 1 990 000 pixels
 
2D: Approx. 2 650 000 pixels
 
Effective (photo, 16:9):
 
Approx. 2 650 000 pixels
 
Effective (photo, 4:3):
 
Approx. 3 540 000 pixels
Lens: G lens
 
3D: 10 × (Optical)
 
2D: 12 × (Optical)
*2
, 17 × (Extended)
*3
,
 
160 × (Digital)
 
F1.8 - F3.4
 
f=2.9 mm – 34.8 mm (1/8 in. – 1 3/8 in.)
 
When converted to a 35 mm still camera
 Movie
*2
:
 
3D: 34.4 mm – 344 mm (1 3/8 in. –
 
13 9/16 in.)
 
2D: 29.8 mm – 357.6 mm (1 3/16 in. –
 
14 1/8 in.)
 Photo:
 
27.4 mm – 328.8 mm (1 1/8 in. – 13 in.)
Color temperature: [Auto], [One Push], [Indoor]
 
(3 200 K), [Outdoor] (5 800 K)
Minimum illumination
 
11 lx (lux) (in default setting, shutter speed
 1/50 
second)
 
3 lx (lux) ([Low Lux] is set to [On], shutter
 
speed 1/25 second)
*1
  The unique pixel array of Sony’s ClearVid 
and the image processing system (BIONZ) 
allow still image resolution equivalent to 
the sizes described.
*2
   [
SteadyShot] is set to [Standard] or 
[Off] .
*3
   [
SteadyShot] is set to [Active].
Input/Output connectors
A/V Remote Connector: Component/video and
 
audio output jack
HDMI jack: HDMI mini Connector
USB jack: mini-AB
Headphone jack: Stereo minijack (
φ 3.5 mm)
MIC input jack: Stereo minijack (
φ 3.5 mm)
LCD screen
Picture: 8.8 cm (3.5 type, aspect ratio 16:9)
Total number of pixels: 1 229 760 (2 562 × 480)
General
Power requirements: DC 6.8 V/7.2 V (battery
 
pack) DC 8.4 V (AC Adaptor)
Average power consumption:
 
During camera recording using the LCD
 
screen at normal brightness:
 
HD: 3D: 4.8 W, 2D: 3.3 W
 STD: 
3.1 
W
Operating temperature: 0 °C to 40 °C (32 °F to
 104 
°F)
Storage temperature: –20 °C to + 60 °C (–4 °F to
 +140 
°F)
Dimensions (approx.):
 
86.5 mm × 74 mm × 148.5 mm (3 7/16 in. ×
 
2 15/16 in. × 5 7/8 in.) (w/h/d) including the
 projecting 
parts
 
86.5 mm × 74 mm × 148.5 mm (3 7/16 in.
 
× 2 15/16 in. × 5 7/8 in.) (w/h/d) including
 
the projecting parts, and the supplied
 
rechargeable battery pack attached
Mass (approx.)
 
630 g (22.2 oz) main unit only
 
725 g (25.6 oz) including the supplied
 
rechargeable battery packAC Adaptor 
AC-L200C/AC-L200D
Power requirements: AC 100 V - 240 V,
 
50 Hz/60 Hz
Current consumption: 0.35 A - 0.18 A
Power consumption: 18 W
Output voltage: DC 8.4 V
*
Operating temperature: 0 °C to 40 °C (32 °F to
 104 
°F)
Storage temperature: –20 °C to + 60 °C (–4 °F to
 +140 
°F)
Dimensions (approx.): 48 mm × 29 mm × 81 mm
 
(1 15/16 in. × 1 3/16 in. × 3 1/4 in.) (w/h/d)
 
excluding the projecting parts
Mass (approx.): 170 g (6.0 oz) excluding the
 
power cord (mains lead)
* See the label on the AC Adaptor for other 
specifications.
Rechargeable battery pack NP-FV70
Maximum output voltage: DC 8.4 V
Output voltage: DC 6.8 V
Maximum charge voltage: DC 8.4 V
Maximum charge current: 2.1 A
Capacity
 
Typical: 14.0 Wh (2 060 mAh)
 
Minimum: 13.0 Wh (1 960 mAh)
Type: Li-ion
Design and specifications of your camcorder and 
accessories are subject to change without notice.
•  Manufactured under license from Dolby 
Laboratories.
– ENGLISH –
These specifications are extracted from instruction manual of
HDR-TD10E.
These specifications are extracted from instruction manual of
HDR-TD10.
SPECIFICATIONS
System
Signal format: NTSC color, EIA standards
 
HDTV 1080/60i 1080/60p specification
Movie recording format:
 HD:
 
3D: MVC (original format)
 
2D: MPEG-4 AVC/H.264 AVCHD format
 
compatible (1080/60p original format)
 STD: 
MPEG2-PS
Audio recording system:
 
Dolby Digital 2ch/5.1ch
 
Dolby Digital 5.1 Creator
Photo file format
 DCF 
Ver.2.0 
Compatible
 Exif 
Ver.2.3 
Compatible
 
MPF Baseline Compatible
Recording media (Movie/Photo)
 Internal 
memory
 64 
GB
 
“Memory Stick PRO Duo” media
 
SD card (Class 4 or faster)
 
When measuring media capacity, 1 GB equals
 
1 billion bytes, a portion of which is used for
 
system management and/or application files.
 
The capacity that a user can use is
 
approximately 63.9 GB.
Image device:
 
4.5 mm (1/4 type) CMOS sensor
 
Recording pixels (photo):
 
Max. 7 100 000 pixels
*1
 (3 072 × 2 304) (4:3)
 
Gross: Approx. 4 200 000 pixels
 
Effective (movie, 16:9)
*2
:
 
3D: Approx. 1 990 000 pixels
 
2D: Approx. 2 650 000 pixels
 
Effective (photo, 16:9):
 
Approx. 2 650 000 pixels
 
Effective (photo, 4:3):
 
Approx. 3 540 000 pixels
Lens: G lens
 
3D: 10 × (Optical)
 
2D: 12 × (Optical)
*2
, 17 × (Extended)
*3
,
 
160 × (Digital)
 
F1.8 - F3.4
 
f=2.9 mm – 34.8 mm (1/8 in. – 1 3/8 in.)
 
When converted to a 35 mm still camera
 Movie
*2
:
 
3D: 34.4 mm – 344 mm (1 3/8 in. –
 
13 9/16 in.)
 
2D: 29.8 mm – 357.6 mm (1 3/16 in. –
 
14 1/8 in.)
 Photo:
 
27.4 mm – 328.8 mm (1 1/8 in. – 13 in.)
Color temperature: [Auto], [One Push], [Indoor]
 
(3 200 K), [Outdoor] (5 800 K)
Minimum illumination
 
11 lx (lux) (in default setting, shutter speed
 1/60 
second)
 
3 lx (lux) ([Low Lux] is set to [On], shutter
 
speed 1/30 second)
*1
  The unique pixel array of Sony’s ClearVid 
and the image processing system (BIONZ) 
allow still image resolution equivalent to the 
sizes described.
*2
  [
SteadyShot] is set to [Standard] or 
[Off] .
*3
  [
SteadyShot] is set to [Active].
Input/Output connectors
A/V Remote Connector: Component/video and
 
audio output jack
HDMI jack: HDMI mini Connector
USB jack: mini-AB
Headphone jack: Stereo minijack (
φ 3.5 mm)
MIC input jack: Stereo minijack (
φ 3.5 mm)
LCD screen
Picture: 8.8 cm (3.5 type, aspect ratio 16:9)
Total number of pixels: 1 229 760 (2 562 × 480)
General
Power requirements: DC 6.8 V/7.2 V (battery
 
pack) DC 8.4 V (AC Adaptor)
Average power consumption:
 
During camera recording using the LCD
 
screen at normal brightness:
 
HD: 3D: 4.8 W, 2D: 3.3 W
 STD: 
3.1 
W
Operating temperature: 0 °C to 40 °C (32 °F to
 104 
°F)
Storage temperature: –20 °C to + 60 °C (–4 °F to
 +140 
°F)
Dimensions (approx.):
 
86.5 mm × 74 mm × 148.5 mm (3 7/16 in. ×
 
2 15/16 in. × 5 7/8 in.) (w/h/d) including the
 projecting 
parts
 
86.5 mm × 74 mm × 148.5 mm (3 7/16 in.
 
× 2 15/16 in. × 5 7/8 in.) (w/h/d) including
 
the projecting parts, and the supplied
 
rechargeable battery pack attached
Mass (approx.)
 
630 g (22.2 oz) main unit only
 
725 g (25.6 oz) including the supplied
 
rechargeable battery pack
AC Adaptor AC-L200C/AC-L200D
Power requirements: AC 100 V - 240 V,
 
50 Hz/60 Hz
Current consumption: 0.35 A - 0.18 A
Power consumption: 18 W
Output voltage: DC 8.4 V
*
Operating temperature: 0 °C to 40 °C (32 °F to
 104 
°F)
Storage temperature: –20 °C to + 60 °C (–4 °F to
 +140 
°F)
Dimensions (approx.): 48 mm × 29 mm × 81 mm
 
(1 15/16 in. × 1 3/16 in. × 3 1/4 in.) (w/h/d)
 
excluding the projecting parts
Mass (approx.): 170 g (6.0 oz) excluding the
 
power cord (mains lead)
* See the label on the AC Adaptor for other 
specifications.
Rechargeable battery pack NP-FV70
Maximum output voltage: DC 8.4 V
Output voltage: DC 6.8 V
Maximum charge voltage: DC 8.4 V
Maximum charge current: 2.1 A
Capacity
 
Typical: 14.0 Wh (2 060 mAh)
 
Minimum: 13.0 Wh (1 960 mAh)
Type: Li-ion
Design and specifications of your camcorder and
accessories are subject to change without notice.
•  Manufactured under license from Dolby 
Laboratories.
– ENGLISH –
– 3 –
HDR-TD10/TD10E_L2
概略仕様
システム
信号方式
 
NTSCカラー、EIA標準方式
 
HDTV 1080/60i 1080/60p方式
ビデオ記録方式
 
HD画質:
 
3D:MVC(独自規格)
 
2D:MPEG-4 AVC/H.264 
 
AVCHD規格準拠(1080/60p独自規格)
 
STD画質:MPEG-2 PS
音声記録方式
 
Dolby Digital 2ch/5.1ch
 
ドルビーデジタル5.1クリエーター搭載
静止画ファイルフォーマット
 
DCF Ver2.0準拠
 
Exif Ver2.3準拠
 
MPF Baseline準拠
記録メディア(動画・静止画)
 
内蔵メモリー
 
64GB
 
“メモリースティック PRO デュオ”
 
SDカード(Class4以上)
容量は、1GBを10億バイトで計算した場合の
数値です。また管理用ファイル、アプリケーショ
ンファイルなどを含むため、実際に使用できる
容量は減少します。ご使用いただけるユーザー
容量は、約63.9 GBです。
撮像素子:4.5 mm(1/4型)CMOSセンサー
 
記録画素数:静止画時 最大710万画素相当
*1
 
(3 072×2 304)
(4:3時)
 
総画素数:約420万画素
 
動画有効画素数
*2
 (16:9):
 
3D:約199万画素
 
2D:約265万画素
 
静止画時有効画素数(16:9):約265万画素
 
静止画時有効画素数(4:3):約354万画素
ズームレンズ:Gレンズ
 
3D:10倍(光学)
 
2D:12倍(光学)
*2
 
17倍(エクステンデッド)
*3
 
160倍(デジタル)
 
F 1.8 ∼ F 3.4
 
f=2.9 mm ∼ 34.8 mm
 
35mmカメラ換算では
 
動画撮影時
*2
 
3D:34.4 mm ∼ 344.0 mm(16:9)
 
2D:29.8 mm ∼ 357.6 mm(16:9)
 
静止画撮影時:
 
27.4 mm ∼ 328.8 mm(4:3)
色温度切り換え:
[オート]、[ワンプッシュ]、[屋内]
 
(3 200 K)、[屋外]
(5 800 K)
最低被写体照度:
 
11 lx(ルクス)
(お買い上げ時、[シャッタース
 
ピード] 1/60秒)
 
3 lx(ルクス)
( Low Lux時、[シャッタースピー
 
ド] 1/30秒)
*1
  ソニー独自のクリアビッド画素配列と画像
処理システムBIONZにより、静止画は表記
の記録サイズを実現しています。
*2
 [
手ブレ補正]が[スタンダード]、また
は[切]のとき
*3
 [
手ブレ補正]が[アクティブ]のとき
入/出力端子
A/Vリモート端子:コンポーネント、
 
映像音声出力兼用端子
HDMI OUT端子:HDMIミニコネクタ
USB端子:mini-AB
ヘッドホン端子:ステレオミニジャック(φ3.5 mm)
MIC入力端子:ステレオミニジャック(φ3.5 mm)
液晶画面
画面サイズ:8.8 cm(3.5型、アスペクト比16:9)
総ドット数:1 229 760ドット
 
横2562×縦480
電源部、その他
電源電圧:バッテリー端子入力 6.8 V/7.2 V
 
DC端子入力 8.4 V
消費電力:液晶画面使用時、明るさ標準:
 
HD画質:3D:4.8 W、2D:3.3 W
 
STD画質:3.1 W
動作温度:0 ℃∼ 40 ℃
保存温度:−20 ℃∼ +60 ℃
外形寸法:
 
約86.5 mm × 74 mm × 148.5 mm
 
(突起部を含む)
(幅×高さ×奥行き)
 
約86.5 mm × 74 mm × 148.5 mm
 
(突起部を含む、付属バッテリー装着状態)
 
(幅×高さ×奥行き)
本体質量:
 
約630 g(本体のみ)
撮影時総質量:
 
約725 g(付属バッテリー含む)
ACアダプター AC-L200C/AC-L200D
電源:AC 100 V - 240 V、50 Hz/60 Hz
消費電流:0.35 A - 0.18 A
消費電力:18 W
定格出力:DC 8.4 V
動作温度:0 ℃∼ 40 ℃
保存温度:−20 ℃∼ +60 ℃
外形寸法:約48 mm×29 mm×81 mm
 
(最大突起部を除く)
(幅×高さ×奥行き)
質量:約170 g(本体のみ)
* その他の仕様についてはACアダプターのラベル
をご覧ください。
リチャージャブルバッテリーパック
NP-FV70
最大電圧:DC 8.4 V
公称電圧:DC 6.8 V
容量:
 
公称容量:14.0 Wh(2 060 mAh)
 
定格(最小)容量:13.0 Wh(1 960 mAh)
使用電池:Li-ion
本機やアクセサリーの仕様および外観は、改良のた
め予告なく変更することがありますが、ご了承くだ
さい。
・  ドルビーラボラトリーズからの実施権に基づき製
造されています。
Model information table
Model
TD10
TD10E
Destination
US, CND, E, KR, J
AEP, NE, E, HK, CH, AUS, JE
Color system
NTSC
PAL
・ Abbreviation
  AUS   : Australian model
 CH 
  : 
Chinese 
model
  CND   : Canadian model
  HK   : Hong Kong model
  J  
: Japanese model
  JE  
: Tourist model
  KR   : Korea model
  NE   : North European Model
– JAPANESE –
– 4 –
HDR-TD10/TD10E_L2
SAFETY-RELATED  COMPONENT  WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH 
MARK 
0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST 
ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPO-
NENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS 
SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY 
SONY. 
ATTENTION AU  COMPOSANT  AYANT  RAPPORT 
À  LA  SÉCURITÉ!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR LES 
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT 
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REM-
PLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT 
LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES 
SUPPLÉMENTS PUBLIÉS PAR SONY.
Caution
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Dispose of used batteries according to the instructions.
注意
電池の交換は,正しく行わないと破裂する恐れがあります。
電池を交換する場合には必ず同じ型名の電池又は同等品と
交換してください。
使用済み電池は,取扱指示に従って処分してください。
SAFETY  CHECK-OUT
After correcting the original service problem, perform the following 
safety checks before releasing the set to the customer.
1.  Check the area of your repair for unsoldered or poorly-soldered 
connections. Check the entire board surface for solder splashes and 
bridges.
2.  Check the interboard wiring to ensure that no wires are “pinched” 
or contact high-wattage resistors.
3.  Look for unauthorized replacement parts, particularly transistors, 
that were installed during a previous repair. Point them out to the 
customer and recommend their replacement.
4.  Look for parts which, through functioning, show obvious signs of 
deterioration. Point them out to the customer and recommend their 
replacement.
5.  Check the B+ voltage to see it is at the values specified.
6.  Flexible Circuit Board Repairing
•  Set the soldering iron tip temperature to 350 °C approximately.
•  Do not touch the soldering iron on the same conductor of the circuit 
board (within 3 times).
•  Be careful not to apply force on the conductor when soldering or 
unsoldering.
1.  注意事項をお守りください。
 
サービスのとき特に注意を要する個所については,キャビ
ネット,シャーシ,部品などにラベルや捺印で注意事項を
表示しています。これらの注意書き及び取扱説明書等の注
意事項を必ずお守り下さい。
2.  指定部品のご使用を
 
セットの部品は難燃性や耐電圧など安全上の特性を持った
ものとなっています。従って交換部品は,使用されていた
ものと同じ特性の部品を使用して下さい。特に回路図,部
品表に0印で指定されている安全上重要な部品は必ず指定
のものをご使用下さい。
3.  部品の取付けや配線の引きまわしはもとどおりに
 
安全上,チューブやテープなどの絶縁材料を使用したり,
プリント基板から浮かして取付けた部品があります。また
内部配線は引きまわしやクランパによって発熱部品や高圧
部品に接近しないよう配慮されていますので,これらは必
ずもとどおりにして下さい。
4.  サービス後は安全点検を
 
サービスのために取外したネジ,部品,配線がもとどおり
になっているか,またサービスした個所の周辺を劣化させ
てしまったところがないかなどを点検し,安全性が確保さ
れていることを確認して下さい。
5.  チップ部品交換時の注意
 
・ 取外した部品は再使用しないで下さい。
 
・ タンタルコンデンサのマイナス側は熱に弱いため交換時
は注意して下さい。
6.  フレキシブルプリント基板の取扱いについて
 
・ 半田こてのこて先温度は約350℃に設定してください。
 
・ 同一パターンに何度もコテ先を当てないで下さい。(3回
以内)
 
・ パターンに力が加わらないよう注意して下さい。
サービス,点検時には次のことにご注意ください。
– ENGLISH –
– JAPANESE –
UNLEADED SOLDER
This unit uses unleaded solder.
Boards requiring use of unleaded solder are printed with the lead free 
mark (LF) indicating the solder contains no lead.
(Caution:  Some printed circuit boards may not come printed with the 
lead free mark due to their particular size.)
: LEAD FREE MARK
Be careful to the following points to solder or unsolder.
• Set the soldering iron tip temperature to 350 °C approximately. 
If cannot control temperature, solder/unsolder at high temperature 
for a short time.
Caution:  The printed pattern (copper foil) may peel away if the 
heated tip is applied for too long, so be careful!
Unleaded solder is more viscous (sticky, less prone to 
flow) than ordinary solder so use caution not to let solder 
bridges occur such as on IC pins, etc.
• Be sure to control soldering iron tips used for unleaded solder and 
those for leaded solder so they are managed separately. Mixing un-
leaded solder and leaded solder will cause detachment phenomenon.
無鉛半田について
本機には無鉛半田が使用されています。
無鉛半田を使用している基板には,無鉛(Lead Free)を意味する
レッドフリーマークがプリントされています。
(注意: 基板サイズによっては,無鉛半田を使用していてもレッ
ドフリーマークがプリントされていないものがありま
す)
:レッドフリーマーク
無鉛半田は,下記の点に注意して使用してください。
・ 半田こてのこて先温度は約350℃に設定してください。
温度調節が無理な場合は,高温短時間で作業を行ってくだ
さい。
注意:  半田こてを長く当てすぎると,基板のパターン(銅
箔)がはがれてしまうことがありますので,注意して
ください。また,従来の半田よりも粘性が強いため,
IC端子などが半田ブリッジしないように注意してく
ださい。
・ 半田こてのこて先は,必ず無鉛半田用と有鉛半田用に分け
て管理してください。
無鉛半田と有鉛半田が混在すると剥離現象が発生してしま
います。
Page of 25
Display

Sony HDR-TD10 / HDR-TD10E (serv.man2) Service Manual ▷ Download

  • DOWNLOAD Sony HDR-TD10 / HDR-TD10E (serv.man2) Service Manual ↓ Size: 7.58 MB | Pages: 25 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony HDR-TD10 / HDR-TD10E (serv.man2) in PDF for free, which will help you to disassemble, recover, fix and repair Sony HDR-TD10 / HDR-TD10E (serv.man2) Movie. Information contained in Sony HDR-TD10 / HDR-TD10E (serv.man2) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.