DOWNLOAD Sony HDR-FX7 / HDR-FX7E (serv.man4) Service Manual ↓ Size: 1.14 MB | Pages: 113 in PDF or view online for FREE

Model
HDR-FX7 HDR-FX7E (serv.man4)
Pages
113
Size
1.14 MB
Type
PDF
Document
Service Manual
Brand
Device
Movie / SECTION 6 ADJUSTMENTS
File
hdr-fx7-hdr-fx7e-sm4.pdf
Date

Sony HDR-FX7 / HDR-FX7E (serv.man4) Service Manual ▷ View online

SECTION 6
ADJUSTMENTS
HDR-FX7/FX7E
RMT-831
ADJ
Revision History
Revision History
Ver. 1.0  2006.10
Link
Link
Adjusting items when replacing main parts and boards
List of service tools
Before starting adjustments
ELECTRONIC VIEWFINDER SYSTEM 
ADJUSTMENTS
LCD SYSTEM ADJUSTMENTS
CAMERA SYSTEM ADJUSTMENTS
PREPARATIONS BEFORE ADJUSTMENTS
INITIALIZATION OF EVR DATA
CAMERA SECTION ADJUSTMENTS
TAPE PATH ADJUSTMENT
HOW TO ENTER PLAYBACK MODE WITHOUT 
CASSETTE
HOW TO ENTER RECORD MODE WITHOUT 
CASSETTE
MECHANISM SECTION ADJUSTMENTS
AUDIO SYSTEM ADJUSTMENTS
VIDEO SYSTEM ADJUSTMENTS
SERVO AND RF SYSTEM ADJUSTMENTS
SYSTEM CONTROL SYSTEM ADJUSTMENTS
PREPARATIONS BEFORE ADJUSTMENTS
VIDEO SECTION ADJUSTMENTS
SERVICE MODE
DATA PROCESS
ADJUSTMENT REMOTE COMMANDER (RM-95)
SERVICE MODE
ADJUSTMENT REMOTE COMMANDER 
(NEW LANC JIG)
Sony EMCS Co.
2006J0500-1
  © 2006.10
Published by Kohda TEC
9-852-154-51
HDR-FX7/FX7E_ADJ
NTSC MODEL: HDR-FX7
PAL MODEL: HDR-FX7E
— 2 —
HDR-FX7/FX7E_ADJ
TABLE OF CONTENTS
6.
ADJUSTMENTS
1.
Before Starting Adjustments ··········································· 6-1
1-1.
Adjusting Items when Replacing Main Parts and
Boards ·············································································· 6-2
1-2.
List of Service Tools ························································ 6-4
6-1.
Camera Section Adjustments ··········································· 6-5
1-1.
Preparations before Adjustments (CAMERA Section) ··· 6-5
1-2.
Initialization of EVR Data ··············································· 6-7
1-3.
Camera System Adjustments ········································· 6-31
1-4.
Electronic Viewfinder System Adjustments ·················· 6-74
1-5.
LCD System Adjustments ············································· 6-79
6-2.
Mechanism Section Adjustments ·································· 6-83
2-1.
How To Enter Record Mode Without Cassette ·············· 6-83
2-2.
How To Enter Playback Mode Without Cassette ·········· 6-83
2-3.
Tape Path Adjustment ···················································· 6-83
6-3.
Video Section Adjustments ··········································· 6-84
3-1.
Preparations Before Adjustments ·································· 6-84
3-2.
System Control System Adjustments ···························· 6-86
3-3.
Servo and RF System Adjustments ······························· 6-88
3-4.
Video System Adjustments ············································ 6-91
3-5.
Audio System Adjustments ··········································· 6-96
6-4.
Service Mode ································································· 6-97
4-1.
Adjustment Remote Commander (RM-95) ··················· 6-97
4-2.
Adjustment Remote Commander (New Lanc Jig) ········ 6-98
4-3.
Data Process ·································································· 6-99
4-4.
Service Mode ······························································· 6-100
Section
Title
Page
*
 The camera color reproduction frame is shown on page
6-108 to 111.
6-1
HDR-FX7/FX7E_ADJ
SECTION 6
ADJUSTMENTS
1.
Before starting adjustments
EVR Data Re-writing Procedure When Replacing Board
The data that is stored in the repair board, is not necessarily correct.
Perform either procedure 1 or procedure 2 or procedure 3 when replacing board.
Procedure 1
Save the EVR data of the machine in which a board is going to be replaced.  Download the saved data after a
board is replaced.
Remove the EEPROM and install it.
(Former board)
(New board)
Procedure 2
Remove the EEPROM from the board of the machine that is going to be repaired.  Install the removed
EEPROM to the replaced board.
Procedure 3
When the data cannot be saved due to defective EEPROM, or when the EEPROM cannot be removed or
installed, save the data from the same model of the same destination, and download it.
After the EVR data is saved and downloaded, check the
respective items of the EVR data.
(Refer to page 6-3 for the items to be checked)
(Machine before starting repair)
(Machine after a board is replaced)
PC
PC
Save the EVR data 
to a personal computer.
Download the saved 
data to a machine.
(Machine to be repaired)
(Machine to be repaired)
(The same model of the same destination)
Save the data.
Download the data.
PC
6-2
HDR-FX7/FX7E_ADJ
1-1. Adjusting items when replacing main parts and boards
 Adjusting items when replacing main parts
When replacing main parts, adjust the items indicated by z in the following table.
Note 1:
When replacing the drum assy or the mechanism deck, reset the data of page: 7, address: A8 to AB to “00”. (Refer to “Record of
Use check” of “6-4. SERVICE MODE”)
Table 6-1-1 (1)
Replaced part
Block replacement
Mounted part replacement
Adjustment Section
Adjustment
(LCD panel)
(Back light)
(LCD panel)
(Drum assembly) (Note 1)
(PITCH, YAW sensor)
(Oscillator)
(CDS, A/D converter)
(Base band signal process, etc.)
(DV signal process)
(Video out)
(Component out AMP)
(REC/PB AMP)
(EVF drive)
(Timing generator (EVF))
(Back light (EVF))
(LCD drive)
Lens device
PRISM assy (Inclding EE-006 board and CMOS imager)
LCD block LCD901
LCD block D901
EVF block LCD902
Mechanism deck (Note 1)
Mechanism deck M901
Mechanism deck MD block
JJ-004 board SE8001, 8002
TT-003 board X1401
TT-003 board IC1201, 1203
TT-003 board IC1801
TT-003 board IC2802
TT-003 board IC3001
TT-003 board IC2001
NN-003 board IC5202
OO-003 board IC6601
OO-003 board IC6602
UU-003 board D8601
PP-003 board IC9002
Initialization of  
Initialization of A, B, D, 1A, 1B page data
EVR data
Initialization of 8, 9, C, 13, 18, 1C, 1D page data
Initialization of camera control page data
Initialization of 7C, 7E, 7F page data
Camera
Origin oscillation check
z
PSD sensor gradient adj.
z
HALL adj.
z
MR adj.
z
Differential gain adj.
z
z
Flange back adj.
z z
Optical axis adj.
z z
Linearity adj.
z
z
F No. & ND light quality standard data input
z
Linear matrix adj.
z
z
Auto white balance standard data input
z
z
LV standard data input
z
z
Auto white balance adj.
z
z
Color reproduction adj.
z
z
MAX GAIN adj.
z
z
White defect adj.
z
Black defect adj.
z z
Angular velocity sensor sensitivity adj.
z
z
EVF
VCO adj.
z z
Back Light adj.
z
z
PSIG level adj.
z
V-COM level adj.
z
RGB AMP adj.
z
Contrast adj.
z
z
White balance adj.
z
z
z
LCD
LCD automatic adj.
z
z
V-COM adj.
z
z
Transmissive mode white balance adj.
z z
z
Reflective mode white balance adj.
z
z
Sample hold phase adj.
z
z
Mechanism
Tape path adj.
z z z
System control
Node uniqe ID No. input
Servo, RF
CAP FG duty adj.
z
z
Switching position adj.
z z z
Error rate check
z z z
z
z
Video
S VIDEO OUT Y level adj.
z
z
S VIDEO OUT chroma level adj.
z
z
COMPONENT OUT Y level adj.
z
z
COMPONENT OUT Pr level adj.
z
z
COMPONENT OUT Pb level adj.
z
z
Page of 113
Display

Sony HDR-FX7 / HDR-FX7E (serv.man4) Service Manual ▷ Download

  • DOWNLOAD Sony HDR-FX7 / HDR-FX7E (serv.man4) Service Manual ↓ Size: 1.14 MB | Pages: 113 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony HDR-FX7 / HDR-FX7E (serv.man4) in PDF for free, which will help you to disassemble, recover, fix and repair Sony HDR-FX7 / HDR-FX7E (serv.man4) Movie. Information contained in Sony HDR-FX7 / HDR-FX7E (serv.man4) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.