DOWNLOAD Sony HDR-FX1000 / HDR-FX1000E (serv.man3) Service Manual ↓ Size: 1.02 MB | Pages: 81 in PDF or view online for FREE

6-5

HDR-FX1000/FX1000E_ADJ

FWD/BACK
T adjustment
screwdriver
J-6082-364-A

Torque screwdriver
J-9049-330-A

Mode Selector II
conversion board (N)
J-6082-567-A

Mode Selector II
ROM (Note1)
J-6082-314-G

Component A/V Cable
1-834-646-11

D Terminal A/V Cable
1-834-646-21

A/V Connecting Cable (1.5 m)
(with S Video terminal)
1-823-156-13

HDMI Cable
(Optional)

J-26

Suncall Grease 
(FG-87HSR)
7-640-006-08

J-23

J-19

Wiping cloth
7-741-900-53

J-25

Mode Selector II
J-6082-282-B

J-30

J-24

Mini DV
torque cassette
J-6082-360-A

J-27

J-28

J-29

J-21

Mirror
(Small oval type)
J-6080-840-A

J-22

Screwdraiver for 
the tape path
J-6082-026-A

Super fine applicator
(made by Nippon
Applicator (P752D))

J-20

Torque Driver Bit (#0)
J-6082-661-A

J-33

J-31

J-34

J-32

A/V Connecting Cable
1-823-156-61

J-35

This is the ROM used for upgrading the version of Mode
Selector II to enable it to be used for the N mechanism.
Set the indication to “Z” when using the mode selector
II.

The changed portions from
Ver. 1.0 are shown in blue.

6-6

HDR-FX1000/FX1000E_ADJ

Before perform the adjustment, check that the data of page:
0, address: 10 is “00”.
If not, select page: 0, address: 10, and set data “00”.

1) Connect the equipment for adjustments according to Fig. 6-1-2.

HDMI OUT

 A/V 

R

 

HDMI OUT

 A/V 

R

 

LANC jack

To
AC adaptor
(AC-L100)

(White) Audio L

Component A/V cable

(1-834-646-11)

(Supplied)

or

HDMI cable

(Optional)

(Red) Audio R

COMPONENT

VIDEO IN

HDTV

Color monitor

HDTV

Color monitor

HDMI

IN

(Green) Y

(Blue) P

B

/C

B

(Red) P

R

/C

R

Except J Model

J Model

(White) Audio L

Connection cord (AV Multiple)

(1-834-646-21)

(Supplied)

or

HDMI cable

(Optional)

(Red) Audio R

COMPONENT

VIDEO IN

(D3/D4/D5)

HDMI

IN

Y

P

B

/C

B

P

R

/C

R

Adjustment remote commander

RM-95
(J-6082-053-B)

NEW LANC JIG
(J-6082-565-A)
LANC cable
(J-6082-442-A)

The changed portions from
Ver. 1.0 are shown in blue.

6-7

HDR-FX1000/FX1000E_ADJ

Fig. b (monitor TV picture)

Unless otherwise specified, set the switches as follows and perform adjustments without loading cassette.

Fig. a
(VIDEO OUT jack output
waveform)

Adjust the camera zoom and direction to
obtain the output waveform shown in Fig. a and
the monitor TV display shown in Fig. b.

1.

CAMERA/VCR switch ......................................... CAMERA

2.

FOCUS switch ............................................................. AUTO

3.

ND FILTER .................................................................... OFF

4.

SHUTTER SPEED .....................................................  AUTO

5.

MENU settings

CAMERA SET menu

BACK LIGHT ........................................................ OFF
SPOT LIGHT .......................................................... OFF
D. EXTENDER ...................................................... OFF

Basically carry out adjustments in the order given.

1) Color bar chart (Color reproduction adjustment frame)

When performing adjustments using the color bar chart, ad-
just the picture frame as shown in Fig. 6-1-3. (Color reproduc-
tion adjustment frame)

2) Clear chart (Color reproduction adjustment frame)

Remove the color bar chart from the pattern box and insert a
clear chart in its place. (Do not perform zoom operations dur-
ing this time)

IN/OUT REC menu

REC FORMAT ............................................. HDV1080i

H

A=B

A B

B A

Enlargement

B

A

Difference in level

Y

ello

w

Cy

an

Green

White

Magenta

Red

Blue

C = D = 0

V

C

D

Y

ello

w

Cy

an

Blue

Green

White

Magenta

Red

CRT picture frame

Electronic beam scanning frame

6-8

HDR-FX1000/FX1000E_ADJ

Set the distance from the front of the lens to the pattern box as shown in Fig. 6-1-4.

1) It takes about 30 minutes for pattern box to stabilize its brightness.

Turn on the pattern box 30 minutes before the adjustment starts.

2) Make arrangement so that the outside light does not enter the chart surface in the pattern box.

Also, place a board between chart and camera, and make a hole at the lens part of the board so that the camera is not reflected in the
shot image screen.
(Adjustment may not be performed correctly due to the influence of outside light.)

Place a box to block a section between pattern box and camera.

Place a board having a hole in front of the camera and cover the pattern box and camera with a blackout curtain

3) Control of color chart

The color chart will fade if it is exposed to direct sunlight or strong light.
Since the fading of color chart progresses even with the light in the pattern box, remove and store the color chart when it is not used.
Remove the color chart and store it.
Store the color chart in a place not exposed to direct light, avoiding high temperature and humidity.
Use the color chart for about three years, and afterward replace it with a new chart.

Pattern box

Front of the lens

Make the hole of the same
size as the lens. 

Make the hole of the same
size as the pattern box. 

L = 17 cm (PTB-1450)

L

Camera

Pattern box

Front of the lens

Board that opens hole
to lens part

L = 17 cm (PTB-1450)

L

Camera

Cover with a blackout curtain

Pattern box

Front of the lens

L = 17 cm (PTB-1450)

L

Camera