Sony HDR-CX250 / HDR-CX250E / HDR-CX260E / HDR-CX260V / HDR-CX260VE / HDR-CX270E / HDR-CX270V (serv.man2) Service Manual ▷ View online
SERVICE MANUAL
HDR-CX250/CX250E/CX260E/CX260V/CX260VE/CX270E/CX270V_L2
SERVICE NOTE (Check the following note before the service.)
Revision History
Published by Sony Techno Create Corporation
Sony Corporation
LEVEL
2
983463535.pdf
Ver. 1.4 2013.12
Digital HD Video Camera Recorder
The components identified by mark
0 or dotted line with mark 0 are
critical for safety.
Replace only with part number
specified.
0 or dotted line with mark 0 are
critical for safety.
Replace only with part number
specified.
Les composants identifiés par une
marque
marque
0 sont critiques pour la
sécurité.
Ne les remplacer que par une
pièce portant le numéro spécifié.
Ne les remplacer que par une
pièce portant le numéro spécifié.
9-834-635-35
Ver.
Date
History
Contents
S.M. Rev.
issued
1.0
2011.12
Official Release
—
—
1.1
2012.01
Revised-1
(A1 11-343)
(A1 11-343)
• Change of SERVICE NOTE.
Page
1-2
,
1-3
,
1-4
,
1-5
,
1-6
,
1-8
,
1-9
,
1-10
,
1-11
,
1-12
Yes
1.2
2012.05
Revised-2
(A2 12-044)
(A2 12-044)
• Addition of North European Model (CX260E).
Page
3
• Correction of EXPLODED VIEWS.
Page
2-5
,
2-7
Yes
1.3
2012.06
Revised-3
(A3 12-166)
(A3 12-166)
• Correction of ACCESSORIES.
Page
2-9
,
2-10
Yes
1.4
2013.12
Revised-4
(A4 13-149)
(A4 13-149)
• Change of EXPLODED VIEWS.
Page
2-6
Yes
2013L08-1
© 2013.12
– ENGLISH –
1-1.
POWER SUPPLY DURING REPAIRS
1-2.
PRECAUTION ON REPLACING THE VC-652 BOARD
1-3.
ADDITION OF DESTINATION DATA FILE
1-4.
PRECAUTION ON REPLACING THE MS-477 BOARD
1-5.
PRECAUTION ON REPLACING THE LENS
1-6. SELF-DIAGNOSIS
FUNCTION
1-7.
METHOD OF COPING WITH SHIFT LENS ERROR
1-8.
GPS RECEIVING CHECK (CX260V/CX260VE/CX270V)
1-9.
PRECAUTION ON REPLACING THE MM-102 BOARD (CX260V/CX260VE/CX270V)
‒ JAPANESE ‒
1-1.
修理時の電源供給について
1-2.
VC-652基板交換時の注意
1-3.
Destination Data ファイルの追加について
1-4.
MS-477基板交換時の注意
1-5.
レンズ交換時の注意
1-6.
自己診断機能
1-7.
シフトレンズエラーの対処方法
1-8.
GPS 受信確認 (CX260V/CX260VE/CX270V)
1-9.
MM-102基板交換時の注意 (CX260V/CX260VE/CX270V)
Photo: HDR-CX250/Black
US Model
Canadian Model
AEP Model
UK Model
North European Model
E Model
Australian Model
Hong Kong Model
Chinese Model
Korea Model
Japanese Model
HDR-CX250/CX250E/CX260E/CX260V/
CX260VE/CX270E/CX270V
Revised-4
Replace the previously issued
SERVICE MANUAL 9-834-635-34
with this Manual.
SERVICE MANUAL 9-834-635-34
with this Manual.
– 2 –
HDR-CX250/CX250E/CX260E/CX260V/CX260VE/CX270E/CX270V_L2
SPECIFICATIONS
System
Signal format: PAL color, CCIR standards
HDTV 1080/50i, 1080/50p specification
Movie recording format:
HD: MPEG-4 AVC/H.264 AVCHD format
Ver.2.0
compatible
STD:
MPEG2-PS
Audio recording system:
Dolby Digital 2ch
Dolby Digital Stereo Creator
Photo file format:
DCF
DCF
Ver.2.0
Compatible
Exif
Ver.2.3
Compatible
MPF Baseline Compatible
Recording media (Movie/Photo):
Internal
Internal
memory
HDR-CX260E/CX260VE: 16 GB
HDR-CX270E: 32 GB
“Memory Stick PRO Duo” media
SD card (Class 4 or faster)
The capacity that a user can use
HDR-CX260VE: Approx. 12.8 GB
SD card (Class 4 or faster)
The capacity that a user can use
HDR-CX260VE: Approx. 12.8 GB
*1
HDR-CX260E: Approx. 15.8 GB
*2
HDR-CX270E: Approx. 31.8 GB
*2
*1
1 GB equals 1 billion bytes, 2.8 GB is used
for pre-installed map and another portion is
used for data management functions. Only
pre-installed demonstration movie may be
deleted.
used for data management functions. Only
pre-installed demonstration movie may be
deleted.
*2
1 GB equals 1 billion bytes, a portion of
which is used for system management and/
or application files. Only preinstalled dem-
onstration movie may be deleted.
or application files. Only preinstalled dem-
onstration movie may be deleted.
Image device:
HDR-CX250E/CX260E/CX260VE/CX270E:
HDR-CX250E/CX260E/CX260VE/CX270E:
4.6 mm (1/3.91 type) CMOS sensor
Recording pixels (photo, 16:9):
Max. 8.9 mega (3 984 × 2 240) pixels
*1
Gross: Approx. 5 430 000 pixels
Effective (movie, 16:9)
*2
:
Approx. 2 230 000 pixels
Effective (photo, 16:9):
Approx. 2 230 000 pixels
Effective (photo, 4:3):
Approx. 1 670 000 pixels
Lens: G lens
HDR-CX250E/CX260E/CX260VE/CX270E:
HDR-CX250E/CX260E/CX260VE/CX270E:
30 × (Optical)
*2
, 55 × (Extended)
*3
, 350 ×
(Digital)
Focal
Focal
length:
f=2.1 mm ~ 63.0 mm (3/32 in. ~ 2 1/2 in.)
When converted to a 35 mm still camera
For
movies
*2
: 29.8 mm ~ 894 mm (1 3/16 in.
~ 35 1/4 in.) (16:9)
For photos: 29.8 mm ~ 894 mm (1 3/16 in. ~
35 1/4 in.) (16:9)
Color temperature: [Auto], [One Push], [Indoor]
(3 200 K), [Outdoor] (5 800 K)
Minimum illumination:
6 lx (lux) (in default setting, shutter speed
1/50
second)
3 lx (lux) ([Low Lux] is set to [On], shutter
speed 1/25 second)
*1
The unique pixel array of Sony’s ClearVid
and the image processing system (BIONZ)
allow still image resolution equivalent to
the sizes described.
allow still image resolution equivalent to
the sizes described.
*2
[
SteadyShot] is set to [Standard] or
[Off].
*3
[
SteadyShot] is set to [Active].
Input/Output connectors
A/V Remote Connector: Video and audio output
jack
HDMI OUT jack: HDMI mini connector
USB jack: mini-AB/Type A (Built-in USB)
(output
jack
HDMI OUT jack: HDMI mini connector
USB jack: mini-AB/Type A (Built-in USB)
(output
only)
MIC input jack: Stereo minijack (
φ
3.5 mm)
LCD screen
Picture: 7.5 cm (3.0 type, aspect ratio 16:9)
Total number of pixels: 230 400 (960 × 240)
Total number of pixels: 230 400 (960 × 240)
General
Power requirements: DC 6.8 V/7.2 V (battery
pack) DC 8.4 V (AC Adaptor)
USB Charging: DC 5 V 500 mA/1.5 A
Average power consumption:
Average power consumption:
During camera recording using LCD screen
at normal brightness:
HD: 2.6 W STD: 2.4 W
Operating temperature: 0 °C to 40 °C (32 °F to
104
104
°F)
Storage temperature: –20 °C to +60 °C (–4 °F to
+140
+140
°F)
Dimensions (approx.):
52.5 mm × 55 mm × 112.5 mm (2 1/8 in. ×
2 1/4 in. × 4 1/2 in.) (w/h/d) including the
projecting
parts
52.5 mm × 55 mm × 122.5 mm (2 1/8 in.
× 2 1/4 in. × 4 7/8 in.) (w/h/d) including
the projecting parts, and the supplied
rechargeable battery pack attached
Mass (approx.)
HDR-CX250E/CX260E/CX270E:
HDR-CX250E/CX260E/CX270E:
200 g (7 oz) main unit only
250 g (8 oz) including the supplied
rechargeable battery pack
HDR-CX260VE:
205 g (7 oz) main unit only
255 g (8 oz) including the supplied
rechargeable battery pack
AC Adaptor AC-L200C/AC-L200D
Power requirements: AC 100 V - 240 V,
50 Hz/60 Hz
Current consumption: 0.35 A - 0.18 A
Power consumption: 18 W
Output voltage: DC 8.4 V*
Operating temperature: 0 °C to 40 °C (32 °F to
104
Power consumption: 18 W
Output voltage: DC 8.4 V*
Operating temperature: 0 °C to 40 °C (32 °F to
104
°F)
Storage temperature: –20 °C to +60 °C (–4 °F to
+140
+140
°F)
Dimensions (approx.): 48 mm × 29 mm ×
81 mm (1 15/16 in. × 1 3/16 in. × 3 1/4 in.)
(w/h/d) excluding the projecting parts
Mass (approx.): 170 g (6.0 oz) excluding the
power cord (mains lead)
* See the label on the AC Adaptor for other
specifications.
Rechargeable battery pack NP-FV50
Maximum output voltage: DC 8.4 V
Output voltage: DC 6.8 V
Maximum charge voltage: DC 8.4 V
Maximum charge current: 2.1 A
Capacity
Output voltage: DC 6.8 V
Maximum charge voltage: DC 8.4 V
Maximum charge current: 2.1 A
Capacity
Typical: 7.0 Wh (1 030 mAh)
Minimum: 6.6 Wh (980 mAh)
Type:
Li-ion
Design and specifications of your camcorder and
accessories are subject to change without notice.
• Manufactured under license from Dolby Labo-
accessories are subject to change without notice.
• Manufactured under license from Dolby Labo-
ratories
– ENGLISH –
These specifications are extracted from instruction manual of
HDR-CX250E/CX260E/CX260VE/CX270E.
HDR-CX250E/CX260E/CX260VE/CX270E.
These specifications are extracted from instruction manual of
HDR-CX250/CX260V.
HDR-CX250/CX260V.
SPECIFICATIONS
System
Signal format: NTSC color, EIA standards
HDTV 1080/60i, 1080/60p specification
Movie recording format:
HD: MPEG-4 AVC/H.264 AVCHD format
Ver.2.0
compatible
STD:
MPEG2-PS
Audio recording system:
Dolby Digital 2ch
Dolby Digital Stereo Creator
Photo file format:
DCF
DCF
Ver.2.0
Compatible
Exif
Ver.2.3
Compatible
MPF Baseline Compatible
Recording media (Movie/Photo):
Internal memory: 16 GB
“Memory Stick PRO Duo” media
SD card (Class 4 or faster)
The capacity that a user can use: Approx. 12.8 GB
SD card (Class 4 or faster)
The capacity that a user can use: Approx. 12.8 GB
*1
*1
1 GB equals 1 billion bytes, 2.8 GB is used
for pre-installed map and another portion is
used for data management functions. Only
pre-installed demonstration movie may be
deleted.
used for data management functions. Only
pre-installed demonstration movie may be
deleted.
Image device:
HDR-CX250/CX260V:
HDR-CX250/CX260V:
4.6 mm (1/3.91 type) CMOS sensor
Recording pixels (photo, 16:9):
Max. 8.9 mega (3 984 × 2 240) pixels
*1
Gross: Approx. 5 430 000 pixels
Effective (movie, 16:9)
*2
:
Approx. 2 230 000 pixels
Effective (photo, 16:9):
Approx. 2 230 000 pixels
Effective (photo, 4:3):
Approx. 1 670 000 pixels
Lens: G lens
30 × (Optical)
*2
, 55 × (Extended)
*3
, 350 ×
(Digital)
F1.8 ~ 3.4
Focal
length:
f=2.1 mm ~ 63.0 mm (3/32 in. ~ 2 1/2 in.)
When converted to a 35 mm still camera
For
movies
*2
: 29.8 mm ~ 894 mm (1 3/16 in.
~ 35 1/4 in.) (16:9)
For photos: 29.8 mm ~ 894 mm (1 3/16 in. ~
35 1/4 in.) (16:9)
Color temperature: [Auto], [One Push], [Indoor]
(3 200 K), [Outdoor] (5 800 K)
Minimum illumination:
6 lx (lux) (in default setting, shutter speed
1/60
second)
3 lx (lux) ([Low Lux] is set to [On], shutter
speed 1/30 second)
*1
The unique pixel array of Sony’s ClearVid
and the image processing system (BIONZ)
allow still image resolution equivalent to
the sizes described.
allow still image resolution equivalent to
the sizes described.
*2
[
SteadyShot] is set to [Standard] or
[Off].
*3
[
SteadyShot] is set to [Active].
Input/Output connectors
A/V Remote Connector: Video and audio output
jack
HDMI OUT jack: HDMI mini connector
USB jack: mini-AB/Type A (Built-in USB)
MIC input jack: Stereo minijack (
jack
HDMI OUT jack: HDMI mini connector
USB jack: mini-AB/Type A (Built-in USB)
MIC input jack: Stereo minijack (
φ
3.5 mm)
LCD screen
Picture: 7.5 cm (3.0 type, aspect ratio 16:9)
Total number of pixels:
Total number of pixels:
230 400 (960 × 240)
General
Power requirements: DC 6.8 V/7.2 V (battery
pack) DC 8.4 V (AC Adaptor)
USB Charging: DC 5 V 500 mA/1.5 A
Average power consumption:
Average power consumption:
During camera recording using LCD screen
at normal brightness:
HD: 2.6 W STD: 2.4 W
Operating temperature: 0 °C to 40 °C (32 °F to
104
104
°F)
Storage temperature: –20 °C to +60 °C (–4 °F to
+140
+140
°F)
Dimensions (approx.):
52.5 mm × 55 mm × 112.5 mm (2 1/8 in. ×
2 1/4 in. × 4 1/2 in.) (w/h/d) including the
projecting
parts
52.5 mm × 55 mm × 122.5 mm (2 1/8 in.
× 2 1/4 in. × 4 7/8 in.) (w/h/d) including
the projecting parts, and the supplied
rechargeable battery pack attached
Mass (approx.)
HDR-CX250:
HDR-CX250:
200 g (7 oz) main unit only
250 g (8 oz) including the supplied
rechargeable battery pack
HDR-CX260V:
205 g (7 oz) main unit only
255 g (8 oz) including the supplied
rechargeable battery pack
AC Adaptor AC-L200C/AC-L200D
Power requirements: AC 100 V - 240 V,
50 Hz/60 Hz
Current consumption: 0.35 A - 0.18 A
Power consumption: 18 W
Output voltage: DC 8.4 V*
Operating temperature: 0 °C to 40 °C (32 °F to
104
Power consumption: 18 W
Output voltage: DC 8.4 V*
Operating temperature: 0 °C to 40 °C (32 °F to
104
°F)
Storage temperature: –20 °C to +60 °C (–4 °F to
+140
+140
°F)
Dimensions (approx.): 48 mm × 29 mm ×
81 mm (1 15/16 in. × 1 3/16 in. × 3 1/4 in.)
(w/h/d) excluding the projecting parts
Mass (approx.): 170 g (6.0 oz) excluding the
power cord (mains lead)
* See the label on the AC Adaptor for other
specifications.
Rechargeable battery pack NP-FV50
Maximum output voltage: DC 8.4 V
Output voltage: DC 6.8 V
Maximum charge voltage: DC 8.4 V
Maximum charge current: 2.1 A
Capacity
Output voltage: DC 6.8 V
Maximum charge voltage: DC 8.4 V
Maximum charge current: 2.1 A
Capacity
Typical: 7.0 Wh (1 030 mAh)
Minimum: 6.6 Wh (980 mAh)
Type:
Li-ion
Design and specifications of your camcorder and
accessories are subject to change without notice.
• Manufactured under license from Dolby Labo-
accessories are subject to change without notice.
• Manufactured under license from Dolby Labo-
ratories.
– ENGLISH –
– 3 –
HDR-CX250/CX250E/CX260E/CX260V/CX260VE/CX270E/CX270V_L2
概略仕様
システム
信号方式
NTSCカラー、EIA標準方式
HDTV 1080/60i方式、1080/60p方式
ビデオ記録方式
HD画質:MPEG-4 AVC/H.264
AVCHD規格 Ver.2.0準拠
STD画質:MPEG-2 PS
音声記録方式
Dolby Digital 2ch
ドルビーデジタルステレオクリエーター搭載
静止画ファイルフォーマット
:DCF Ver2.0準拠
:Exif Ver2.3準拠
:MPF Baseline準拠
記録メディア(動画・静止画)
内蔵メモリー:32GB
“メモリースティック PRO デュオ”
SDカード(Class4以上)
使用可能容量:約28.8GB
容量は、1GBを10億バイトで計算した場合の
数値です。約2.8GBは内蔵地図領域です。また
管理用ファイル、アプリケーションファイルな
どを含むため、実際に使用できる容量は減少し
ます。内蔵デモンストレーション動画は削除が
可能です。
数値です。約2.8GBは内蔵地図領域です。また
管理用ファイル、アプリケーションファイルな
どを含むため、実際に使用できる容量は減少し
ます。内蔵デモンストレーション動画は削除が
可能です。
撮像素子:
4.6 mm (1/3.91型) CMOSセンサー
記録画素数:
静止画時 最大890万画素相当
*1
(3 984 × 2 240)
(16:9時)
総画素数:約543万画素
動画時有効画素数
*2
( 16:9):約223万画素
静止画時有効画素数(16:9):約223万画素
静止画時有効画素数(4:3):約167万画素
ズームレンズ:Gレンズ
30倍(光学)
*2
、55倍(エクステンデッド)
*3
、
350倍(デジタル)
F1.8 ∼ 3.4
f=2.1 ∼ 63.0 mm
35mmカメラ換算では
動画撮影時
*2
:
f=29.8 ∼ 894 mm(16:9)
静止画撮影時:
f=29.8 ∼ 894 mm(16:9)
色温度切り換え:
[オート]、[ワンプッシュ]、[屋内]
(3 200 K)、[屋外]
(5 800 K)
最低被写体照度:
6 lx(ルクス)
(お買い上げ時、
[シャッタースピー
ド] 1/60秒)
3 lx(ルクス)
([ Low Lux]が[入]時、[シャッ
タースピード] 1/30秒)
*1
ソニー独自のクリアビッド画素配列と画像
処理システムBIONZにより、静止画は表記
の記録サイズを実現しています。
の記録サイズを実現しています。
*2
[
手ブレ補正]が[スタンダード]、または
[切]のとき
*3
[
手ブレ補正]が[アクティブ]のとき
入/出力端子
A/Vリモート端子:映像音声出力兼用端子
HDMI OUT端子:HDMIミニコネクタ
USB端子:mini-AB/タイプA(ビルトインUSB)
MIC入力端子:ステレオミニジャック(φ3.5 mm)
HDMI OUT端子:HDMIミニコネクタ
USB端子:mini-AB/タイプA(ビルトインUSB)
MIC入力端子:ステレオミニジャック(φ3.5 mm)
液晶モニター
画面サイズ:7.5 cm(3.0型、アスペクト比16:9)
総ドット数:
総ドット数:
総ドット数:230 400ドット
横960×縦240
電源部、その他
電源電圧:バッテリー端子入力 6.8 V/7.2 V
DC端子入力 8.4 V
USB充電:DC 5V 500 mA/1.5 A
消費電力:液晶モニター使用時、明るさ標準:
HD:2.6 W STD:2.4 W
動作温度:0 ℃∼ 40 ℃
保存温度:−20 ℃∼ +60 ℃
外形寸法:
保存温度:−20 ℃∼ +60 ℃
外形寸法:
52.5 × 55 × 112.5 mm
(突起部を含む)
(幅×高さ×奥行き)
52.5 × 55 × 122.5 mm
(突起部を含む、付属バッテリー装着状態)
(幅×高さ×奥行き)
本体質量:
約205 g(本体のみ)
撮影時総質量:
約255 g(付属バッテリー含む)
ACアダプター AC-L200C/AC-L200D
電源:AC 100 V - 240 V、50 Hz/60 Hz
消費電流:0.35 A - 0.18 A
消費電力:18 W
定格出力:DC 8.4 V
消費電流:0.35 A - 0.18 A
消費電力:18 W
定格出力:DC 8.4 V
*
動作温度:0 ℃∼ 40 ℃
保存温度:−20 ℃∼ +60 ℃
外形寸法:約 48 mm × 29 mm × 81 mm(最大
突起部を除く)
保存温度:−20 ℃∼ +60 ℃
外形寸法:約 48 mm × 29 mm × 81 mm(最大
突起部を除く)
(幅×高さ×奥行き)
質量:約170 g(本体のみ)
*
その他の仕様についてはACアダプターのラベル
をご覧ください。
リチャージャブルバッテリーパック
NP-FV50
NP-FV50
最大電圧:DC 8.4 V
公称電圧:DC 6.8 V
容量:
公称電圧:DC 6.8 V
容量:
公称容量:7.0 Wh(1 030 mAh)
定格(最小)容量:6.6 Wh(980 mAh)
使用電池:Li-ion
本機やアクセサリーの仕様および外観は、改良のた
め予告なく変更することがありますが、ご了承くだ
さい。
め予告なく変更することがありますが、ご了承くだ
さい。
・ ドルビーラボラトリーズからの実施権に基づき製
造されています。
Model information table
Model
HDR-CX250
HDR-CX250E
HDR-CX260E
HDR-CX260V
HDR-CX260VE
Destination
CND, KR
AEP, UK, NE, E
NE
, E
US, CND, E
AEP, NE, E, AUS,
HK
COLOR system
NTSC
PAL
PAL
NTSC
PAL
Recording media
–
–
Internal memory
16 GB
Internal memory
16 GB
Internal memory
16 GB
LENS
LSV-1450A
LSV-1450A
LSV-1450A
LSV-1450A
LSV-1450A
Projector
–
–
–
–
–
GPS
–
–
–
●
●
Hot shoe
–
–
–
–
–
Discharge of flash
capacitor
–
–
–
–
–
Model
HDR-CX270E
HDR-CX270V
Destination
CH
J
COLOR system
PAL
NTSC
Recording media
Internal memory
32 GB
Internal memory
32 GB
LENS
LSV-1450A
LSV-1450A
Projector
–
–
GPS
–
●
Hot shoe
–
–
Discharge of flash
capacitor
–
–
MODEL GROUP
IM Model (Internal Memory Model):
CX260E/CX260V/CX260VE/CX270E/CX270V
Non IM Model (Non Internal Memory Model): CX250/CX250E
GPS Model:
CX260V/CX260VE/CX270V
Non GPS Model: CX250/CX250E/CX260E/CX270E
• Abbreviation
AUS: Australian
model
CH: Chinese
model
CND:
Canadian
model
HK: Hong Kong model
J: Japanese
model
KR: Korea
model
NE: North European model
– JAPANESE –
The changed portions from
Ver. 1.1 are shown in blue.
Ver. 1.1 are shown in blue.
Ver. 1.2 2012.05
– 4 –
HDR-CX250/CX250E/CX260E/CX260V/CX260VE/CX270E/CX270V_L2
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST
ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPO-
NENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS
SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY
SONY.
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST
ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPO-
NENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS
SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY
SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REM-
PLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT
LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES
SUPPLÉMENTS PUBLIÉS PAR SONY.
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REM-
PLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT
LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES
SUPPLÉMENTS PUBLIÉS PAR SONY.
Caution
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Dispose of used batteries according to the instructions.
Replace only with the same or equivalent type.
Dispose of used batteries according to the instructions.
注意
電池の交換は,正しく行わないと破裂する恐れがあります。
電池を交換する場合には必ず同じ型名の電池又は同等品と
交換してください。
使用済み電池は,取扱指示に従って処分してください。
電池を交換する場合には必ず同じ型名の電池又は同等品と
交換してください。
使用済み電池は,取扱指示に従って処分してください。
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
1. Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes and
bridges.
bridges.
2. Check the interboard wiring to ensure that no wires are “pinched”
or contact high-wattage resistors.
3. Look for unauthorized replacement parts, particularly transistors,
that were installed during a previous repair. Point them out to the
customer and recommend their replacement.
customer and recommend their replacement.
4. Look for parts which, through functioning, show obvious signs of
deterioration. Point them out to the customer and recommend their
replacement.
replacement.
5. Check the B+ voltage to see it is at the values specified.
6. Flexible Circuit Board Repairing
6. Flexible Circuit Board Repairing
• Set the soldering iron tip temperature to 350 °C approximately.
• Do not touch the soldering iron on the same conductor of the circuit
• Do not touch the soldering iron on the same conductor of the circuit
board (within 3 times).
• Be careful not to apply force on the conductor when soldering or
unsoldering.
1. 注意事項をお守りください。
サービスのとき特に注意を要する個所については,キャビ
ネット,シャーシ,部品などにラベルや捺印で注意事項を
表示しています。これらの注意書き及び取扱説明書等の注
意事項を必ずお守り下さい。
ネット,シャーシ,部品などにラベルや捺印で注意事項を
表示しています。これらの注意書き及び取扱説明書等の注
意事項を必ずお守り下さい。
2. 指定部品のご使用を
セットの部品は難燃性や耐電圧など安全上の特性を持った
ものとなっています。従って交換部品は,使用されていた
ものと同じ特性の部品を使用して下さい。特に回路図,部
品表に0印で指定されている安全上重要な部品は必ず指定
のものをご使用下さい。
ものとなっています。従って交換部品は,使用されていた
ものと同じ特性の部品を使用して下さい。特に回路図,部
品表に0印で指定されている安全上重要な部品は必ず指定
のものをご使用下さい。
3. 部品の取付けや配線の引きまわしはもとどおりに
安全上,チューブやテープなどの絶縁材料を使用したり,
プリント基板から浮かして取付けた部品があります。また
内部配線は引きまわしやクランパによって発熱部品や高圧
部品に接近しないよう配慮されていますので,これらは必
ずもとどおりにして下さい。
プリント基板から浮かして取付けた部品があります。また
内部配線は引きまわしやクランパによって発熱部品や高圧
部品に接近しないよう配慮されていますので,これらは必
ずもとどおりにして下さい。
4. サービス後は安全点検を
サービスのために取外したネジ,部品,配線がもとどおり
になっているか,またサービスした個所の周辺を劣化させ
てしまったところがないかなどを点検し,安全性が確保さ
れていることを確認して下さい。
になっているか,またサービスした個所の周辺を劣化させ
てしまったところがないかなどを点検し,安全性が確保さ
れていることを確認して下さい。
5. チップ部品交換時の注意
・ 取外した部品は再使用しないで下さい。
・ タンタルコンデンサのマイナス側は熱に弱いため交換時
は注意して下さい。
6. フレキシブルプリント基板の取扱いについて
・ 半田こてのこて先温度は約350℃に設定してください。
・ 同一パターンに何度もコテ先を当てないで下さい。(3回
以内)
・ パターンに力が加わらないよう注意して下さい。
サービス,点検時には次のことにご注意ください。
– ENGLISH –
– JAPANESE –
UNLEADED SOLDER
This unit uses unleaded solder.
Boards requiring use of unleaded solder are printed with the lead free
mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with the
Boards requiring use of unleaded solder are printed with the lead free
mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with the
lead free mark due to their particular size.)
: LEAD FREE MARK
Be careful to the following points to solder or unsolder.
• Set the soldering iron tip temperature to 350 °C approximately.
If cannot control temperature, solder/unsolder at high temperature
for a short time.
Caution: The printed pattern (copper foil) may peel away if the
for a short time.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
Unleaded solder is more viscous (sticky, less prone to
flow) than ordinary solder so use caution not to let solder
bridges occur such as on IC pins, etc.
flow) than ordinary solder so use caution not to let solder
bridges occur such as on IC pins, etc.
• Be sure to control soldering iron tips used for unleaded solder and
those for leaded solder so they are managed separately. Mixing un-
leaded solder and leaded solder will cause detachment phenomenon.
leaded solder and leaded solder will cause detachment phenomenon.
無鉛半田について
本機には無鉛半田が使用されています。
無鉛半田を使用している基板には,無鉛(Lead Free)を意味する
レッドフリーマークがプリントされています。
本機には無鉛半田が使用されています。
無鉛半田を使用している基板には,無鉛(Lead Free)を意味する
レッドフリーマークがプリントされています。
(注意: 基板サイズによっては,無鉛半田を使用していてもレッ
ドフリーマークがプリントされていないものがありま
す)
す)
:レッドフリーマーク
無鉛半田は,下記の点に注意して使用してください。
・ 半田こてのこて先温度は約350℃に設定してください。
温度調節が無理な場合は,高温短時間で作業を行ってくだ
さい。
注意: 半田こてを長く当てすぎると,基板のパターン(銅
さい。
注意: 半田こてを長く当てすぎると,基板のパターン(銅
箔)がはがれてしまうことがありますので,注意して
ください。また,従来の半田よりも粘性が強いため,
IC端子などが半田ブリッジしないように注意してく
ださい。
ください。また,従来の半田よりも粘性が強いため,
IC端子などが半田ブリッジしないように注意してく
ださい。
・ 半田こてのこて先は,必ず無鉛半田用と有鉛半田用に分け
て管理してください。
無鉛半田と有鉛半田が混在すると剥離現象が発生してしま
います。
います。