DOWNLOAD Sony HDR-CX240 / HDR-CX240E / HDR-PJ240 / HDR-PJ240E / HDR-PJ270 / HDR-PJ270E / HDR-PJ275 Service Manual ↓ Size: 5.99 MB | Pages: 60 in PDF or view online for FREE

Model
HDR-CX240 HDR-CX240E HDR-PJ240 HDR-PJ240E HDR-PJ270 HDR-PJ270E HDR-PJ275
Pages
60
Size
5.99 MB
Type
PDF
Document
Service Manual
Brand
Device
Movie / LEVEL3
File
hdr-cx240-hdr-cx240e-hdr-pj240-hdr-pj240e-hdr-pj27.pdf
Date

Sony HDR-CX240 / HDR-CX240E / HDR-PJ240 / HDR-PJ240E / HDR-PJ270 / HDR-PJ270E / HDR-PJ275 Service Manual ▷ View online

SERVICE MANUAL
Revision History
Published by Sony Techno Create Corporation
Sony Corporation
LEVEL 
3
HDR-CX240/CX240E/PJ240/PJ240E/PJ270/PJ270E/PJ275_L3
Check the SERVICE NOTE (LEVEL 2) before the service.
983477211.pdf
Digital HD Video Camera Recorder
The components identified by mark 
0 or dotted line with mark 0 are 
critical for safety.
Replace only with part number 
specified.
Les composants identifiés par une 
marque 
0 sont critiques pour la 
sécurité.
Ne les remplacer que par une 
pièce portant le numéro spécifié.
9-834-772-11
Ver.
Date
History
Contents
S.M. Rev.
issued
1.0
2014.01
Official Release
2014A08-1
  © 2014.01
MODEL GROUP
Projector Model: 
PJ240/PJ240E/PJ270/PJ270E/PJ275
Non Projector Model:  CX240/CX240E
Ver. 1.0  2014.01
US Model
Canadian Model
AEP Model
UK Model
North European Model
E Model
Australian Model
Chinese Model
Korea Model
Brazilian Model
HDR-CX240/CX240E/PJ240/PJ240E/
PJ270/PJ270E/PJ275
Photo: HDR-CX240/Black
– 2 –
HDR-CX240/CX240E/PJ240/PJ240E/PJ270/PJ270E/PJ275_L3
SAFETY-RELATED  COMPONENT  WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH 
MARK 
0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST 
ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPO-
NENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS 
SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY 
SONY. 
ATTENTION AU  COMPOSANT  AYANT  RAPPORT 
À  LA  SÉCURITÉ!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR LES 
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT 
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REM-
PLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT 
LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES 
SUPPLÉMENTS PUBLIÉS PAR SONY.
Caution
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Dispose of used batteries according to the instructions.
SAFETY  CHECK-OUT
After correcting the original service problem, perform the following 
safety checks before releasing the set to the customer.
1.  Check the area of your repair for unsoldered or poorly-soldered 
connections. Check the entire board surface for solder splashes and 
bridges.
2.  Check the interboard wiring to ensure that no wires are “pinched” 
or contact high-wattage resistors.
3.  Look for unauthorized replacement parts, particularly transistors, 
that were installed during a previous repair. Point them out to the 
customer and recommend their replacement.
4.  Look for parts which, through functioning, show obvious signs of 
deterioration. Point them out to the customer and recommend their 
replacement.
5.  Check the B+ voltage to see it is at the values specified.
6.  Flexible Circuit Board Repairing
•  Set the soldering iron tip temperature to 350 °C approximately.
•  Do not touch the soldering iron on the same conductor of the circuit 
board (within 3 times).
•  Be careful not to apply force on the conductor when soldering or 
unsoldering.
UNLEADED  SOLDER
This unit uses unleaded solder. 
Boards requiring use of unleaded solder are printed with the lead free 
mark (LF) indicating the solder contains no lead.
(Caution:  Some printed circuit boards may not come printed with the 
lead free mark due to their particular size.)
: LEAD FREE MARK
Be careful to the following points to solder or unsolder.
•  Set the soldering iron tip temperature to 350 °C approximately.
 
If cannot control temperature, solder/unsolder at high temperature 
for a short time.
 
Caution: The printed pattern (copper foil) may peel away if the 
heated tip is applied for too long, so be careful!
 
 
Unleaded solder is more viscous (sticky, less prone to 
flow) than ordinary solder so use caution not to let solder 
bridges occur such as on IC pins, etc.
•  Be sure to control soldering iron tips used for unleaded solder and 
those for leaded solder so they are managed separately. Mixing un-
leaded solder and leaded solder will cause detachment phenomenon.
注意
如果电池更换不当会有爆炸危险。
只能用同样类型或等效类型的电池来更换。
务必按照说明处置用完的电池。
2-1
Ref. No. 
Part No. 
Description
Ref. No. 
Part No. 
Description
HDR-CX240/CX240E/PJ240/PJ240E/PJ270/PJ270E/PJ275_L3
NOTE:
•  -XX, -X mean standardized parts, so they may have some differ-
ences from the original one.
•  Items marked “*” are not stocked since they are seldom required for 
routine service. Some delay should be anticipated when ordering 
these items.
•  The mechanical parts with no reference number in the exploded 
views are not supplied.
•  Due to standardization, replacements in the parts list may be dif-
ferent from the parts specified in the diagrams or the components 
used on the set.
• CAPACITORS:
 uF: 
μF
• COILS
 uH: 
μH
• RESISTORS
  All resistors are in ohms.
  METAL: metal-film resistor
  METAL OXIDE: Metal Oxide-film resistor
 F: 
nonflammable
• SEMICONDUCTORS
  In each case, u: μ, for example:
 uA...: 
μA... , uPA... , μPA... ,
 uPB... 
μPB... , uPC... , μPC... ,
 uPD..., 
μPD...
The components identified by mark 0 
or dotted line with mark 0 are critical 
for safety.
Replace only with part number specified.
Les composants identifiés par une mar-
que 0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce 
portant le numéro spécifié.
When indicating parts by reference num-
ber, please include the board name.
   
A-1903-090-A  CM-1004 BOARD, COMPLETE
   
 
***********************
(CP001 is not supplied, but this is included in CM-1004 COMPLETE BOARD.)
   
 
< CAPACITOR >
 C6703  1-112-717-91  CERAMIC 
CHIP  1uF 
10%  6.3V
 C6708  1-112-717-91  CERAMIC 
CHIP  1uF 
10%  6.3V
 C6709  1-114-582-91  CERAMIC 
CHIP  0.1uF 
10%  16V
 C6710  1-112-717-91  CERAMIC 
CHIP  1uF 
10%  6.3V
 C6711  1-114-582-91  CERAMIC 
CHIP  0.1uF 
10%  16V
 C6712  1-164-937-11  CERAMIC 
CHIP  0.001uF  10%  50V
 C6713  1-165-884-91  CERAMIC 
CHIP  2.2uF 
10%  6.3V
 C6714  1-114-582-91  CERAMIC 
CHIP  0.1uF 
10%  16V
 C6715  1-116-724-11  CERAMIC 
CHIP  4.7uF 
20%  6.3V
 C6716  1-114-582-91  CERAMIC 
CHIP  0.1uF 
10%  16V
 C6717  1-114-582-91  CERAMIC 
CHIP  0.1uF 
10%  16V
 C6718  1-114-582-91  CERAMIC 
CHIP  0.1uF 
10%  16V
 C6720  1-114-582-91  CERAMIC 
CHIP  0.1uF 
10%  16V
 C6728  1-112-717-91  CERAMIC 
CHIP  1uF 
10%  6.3V
 C6729  1-112-717-91  CERAMIC 
CHIP  1uF 
10%  6.3V
 C6743  1-164-937-11  CERAMIC 
CHIP  0.001uF  10%  50V
 C6745  1-114-582-91  CERAMIC 
CHIP  0.1uF 
10%  16V
   
 
< CONNECTOR >
*  CN6702  1-821-503-11 
CONNECTOR, FPC (ZIF) 39P
   
 
< COMPOSITION CIRCUIT BLOCK >
 CP001  (Not 
supplied)  IMX167CQL-13
   
 
< IC >
  IC6703  6-715-211-01 
IC   MM3404A28URE
   
 
< RESISTOR >
 R6707  1-218-973-11  METAL 
CHIP 
47K 
5% 
1/16W
   
1-887-155-11 
FP-2060 FLEXIBLE BOARD (PJ270/PJ270E/PJ275)
   
 
********************
   
A-1903-100-A  FP-2106 FLEXIBLE BOARD, COMPLETE 
(Projector Model)
   
 
******************************
   
 
< CONNECTOR >
  CN5503  1-842-687-11 
CONNECTOR, BOARD TO BOARD 42P
   
1-889-096-11 
FP-2183 FLEXIBLE BOARD
   
 
********************
   
1-889-097-11 
FP-2184 FLEXIBLE BOARD (Non Projector Model)
   
 
********************
   
1-889-184-11 
FP-2190 FLEXIBLE BOARD
   
 
********************
   
1-889-187-11 
FP-2193 FLEXIBLE BOARD (Projector Model)
   
 
********************
   
1-889-209-11 
FP-2200 FLEXIBLE BOARD (PJ275)
   
 
********************
   
1-889-222-11 
FP-2201 FLEXIBLE BOARD
   
 
********************
   
A-1992-840-A  GY-1005 BOARD, COMPLETE
   
 
**********************
(C2404, C2405, C2407, C2409, C2411, C2412, R2408, R2409, R2412, R2413 and 
SE7701 are not supplied, but they are included in GY-1005 COMPLETE BOARD.)
   
 
< CAPACITOR >
* C2403  1-118-458-11  CERAMIC CHIP  0.1uF 
10% 
6.3V
  C2404 
(Not supplied)  CERAMIC CHIP 
0.047uF 
10% 
6.3V
  C2405 
(Not supplied)  CERAMIC CHIP 
0.047uF 
10% 
6.3V
 C2406  1-116-713-11  CERAMIC 
CHIP  22uF 
20%  10V
  C2407 
(Not supplied)  CERAMIC CHIP 
0.33uF 
10% 
6.3V
  C2409 
(Not supplied)  CERAMIC CHIP 
0.33uF 
10% 
6.3V
 C2410  1-116-713-11  CERAMIC 
CHIP  22uF 
20%  10V
  C2411 
(Not supplied)  CERAMIC CHIP 
0.047uF 
10% 
6.3V
  C2412 
(Not supplied)  CERAMIC CHIP 
0.047uF 
10% 
6.3V
* C2413  1-118-458-11  CERAMIC CHIP  0.1uF 
10% 
6.3V
* C7701  1-118-458-11  CERAMIC CHIP  0.1uF 
10% 
6.3V
* C7702  1-118-458-11  CERAMIC CHIP  0.1uF 
10% 
6.3V
* C7703  1-118-458-11  CERAMIC CHIP  0.1uF 
10% 
6.3V
* C7704  1-118-458-11  CERAMIC CHIP  0.1uF 
10% 
6.3V
   
 
< CONNECTOR >
  CN4201  1-816-655-61 
CONNECTOR, FFC/FPC 8P
   
 
< IC >
  IC2403  6-707-333-01 
IC   NJM3230SE7
   
 
< RESISTOR >
 R2216  1-694-535-91  SHORT 
CHIP 
0
 R2218  1-694-535-91  SHORT 
CHIP 
0
 R2405  1-240-711-91  METAL 
CHIP 
22K 
5% 
1/20W
 R2406  1-240-711-91  METAL 
CHIP 
22K 
5% 
1/20W
  R2408 
(Not supplied)  METAL CHIP 
10K 
1% 
1/20W
  R2409 
(Not supplied)  METAL CHIP 
15K 
1% 
1/20W
* R2410  1-257-283-11  METAL CHIP 
82K 
1% 
1/20W
* R2411  1-257-283-11  METAL CHIP 
82K 
1% 
1/20W
  R2412 
(Not supplied)  METAL CHIP 
15K 
1% 
1/20W
  R2413 
(Not supplied)  METAL CHIP 
10K 
1% 
1/20W
 R2414  1-240-711-91  METAL 
CHIP 
22K 
5% 
1/20W
 R2415  1-240-711-91  METAL 
CHIP 
22K 
5% 
1/20W
 R2417  1-694-535-91  SHORT 
CHIP 
0
 R2419  1-694-535-91  SHORT 
CHIP 
0
2-2.  ELECTRICAL  PARTS  LIST
Caution
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Dispose of used batteries according to the instructions.
Note 2:  Replace the battery holder (BH4500 or BH4600) together 
when replacing the lithium storage battery (BT4500 or 
BT4600) on the PD-1028 board or PD-1029 board. (The 
battery holder removed once cannot be used again.)
When mounting these parts, mount new battery holder first 
and attach new lithium battery next.
Note1 :  Be sure to read “Precautions for Replacement of Imager” 
on page 6-1 when changing the imager.
CM-1004
FP-2060
FP-2106
FP-2183
FP-2184
FP-2190
FP-2193
FP-2200
FP-2201
GY-1005
The components identified by mark   contain confidential information.
Strictly follow the instructions whenever the components are re-
paired and/or replaced.
Destroy and discard the prescribed board and IC after they are 
replaced.
Les composants identifiés par le symbole   contiennent des infor-
mations confidentielles.
Suivez scrupuleusement les instructions chaque fois qu'un com-
posant est remplacé et / ou réparé.
Veuillez détruire et éliminer les circuits imprimés et / ou les circuits 
intégrés que vous avez remplacés.
标识有
   的元件包含机密信息。
更换或维修元件时,请严格遵守指⽰。
更换后的电路板和IC,应予以报废。
注意
如果电池更换不当会有爆炸危险。
只能用同样类型或等效类型的电池来更换。
务必按照说明处置用完的电池。
2-2
Ref. No. 
Part No. 
Description
Ref. No. 
Part No. 
Description
Ref. No. 
Part No. 
Description
Ref. No. 
Part No. 
Description
HDR-CX240/CX240E/PJ240/PJ240E/PJ270/PJ270E/PJ275_L3
 R2422  1-694-535-91  SHORT 
CHIP 
0
 R4201  1-240-716-91  METAL 
CHIP 
68K 
5% 
1/20W
 R4202  1-240-726-91  METAL 
CHIP 
470K 
5% 
1/20W
   
 
< SENSOR >
  SE7701  (Not supplied)  SENSOR, ANGULAR VELOCITY
   
A-1992-841-A  MM-102 BOARD, COMPLETE (PJ270/PJ270E/PJ275)
   
 
**********************
   
 
< CAPACITOR >
 C8102  1-118-465-11  CERAMIC 
CHIP  4.7uF 
10%  16V
 C8103  1-118-386-11  CERAMIC 
CHIP  0.1uF 
10%  16V
 C8104  1-118-386-11  CERAMIC 
CHIP  0.1uF 
10%  16V
* C8701  1-116-738-11  CERAMIC CHIP  1uF 
10% 
6.3V
   
 
< CONNECTOR >
*  CN8101  1-816-647-61 
FFC/FPC CONNECTOR (LIF) 18P
   
 
< IC >
*  IC8101  6-721-333-01 
IC   THGBM5G6A2JBAIRH10
  IC8701  6-716-442-11 
IC   MM3404A29URE
   
 
< RESISTOR >
 R8101  1-218-965-11  METAL 
CHIP 
10K 
5% 
1/16W
 R8103  1-218-990-81  SHORT 
CHIP 
0
 R8104  1-218-990-81  SHORT 
CHIP 
0
 R8105  1-218-990-81  SHORT 
CHIP 
0
 R8106  1-218-990-81  SHORT 
CHIP 
0
 R8107  1-218-990-81  SHORT 
CHIP 
0
 R8108  1-218-990-81  SHORT 
CHIP 
0
 R8109  1-218-990-81  SHORT 
CHIP 
0
 R8110  1-218-990-81  SHORT 
CHIP 
0
 R8112  1-218-990-81  SHORT 
CHIP 
0
   
 
< COMPOSITION CIRCUIT BLOCK >
  RB8101  1-242-962-21 
RES, NETWORK  82 (1005X4)
  RB8102  1-242-962-21 
RES, NETWORK  82 (1005X4)
   
A-1994-877-A  PD-1028 BOARD, COMPLETE (SERVICE)
(Non Projector Model)
   
 
******************************
(S4501 is not supplied, but this is included in PD-1028 COMPLETE BOARD 
(SERVICE).)
(BT4500 is not included in PD-1028 COMPLETE BOARD (SERVICE).)
   
 
< BATTERY HOLDER >
 BH4500  1-251-928-21 
SOCKET, BATTERY
   
 
< BATTERY >
 BT4500  1-756-134-15 
BATTERY, LITHIUM (SECONDARY)
   
 
< CAPACITOR >
* C4501  1-116-738-11  CERAMIC CHIP  1uF 
10% 
6.3V
* C4503  1-118-458-11  CERAMIC CHIP  0.1uF 
10% 
6.3V
 C8040  1-118-045-11  CERAMIC 
CHIP  2.2uF 
10%  25V
 C8041  1-116-729-11  CERAMIC 
CHIP  2.2uF 
20%  10V
 C8042  1-118-462-11  CERAMIC 
CHIP  1uF 
10%  10V
 C8043  1-118-462-11  CERAMIC 
CHIP  1uF 
10%  10V
 C8044  1-118-040-11  CERAMIC 
CHIP  2.2uF 
10%  16V
 C8045  1-116-729-11  CERAMIC 
CHIP  2.2uF 
20%  10V
 C8046  1-118-039-11  CERAMIC 
CHIP  1uF 
10%  25V
 C8047  1-116-729-11  CERAMIC 
CHIP  2.2uF 
20%  10V
 C8048  1-116-729-11  CERAMIC 
CHIP  2.2uF 
20%  10V
 C8049  1-118-039-11  CERAMIC 
CHIP  1uF 
10%  25V
   
 
< CONNECTOR >
*  CN4500  1-821-503-11 
CONNECTOR, FPC (ZIF) 39P
*  CN8040  1-821-503-11 
CONNECTOR, FPC (ZIF) 39P
   
 
< COIL >
* L4500  1-481-102-21  INDUCTOR 
10uH
   
 
< RESISTOR >
 R4503  1-218-954-11  METAL 
CHIP 
1.2K 
5% 
1/16W
 R4508  1-218-960-11  METAL 
CHIP 
3.9K 
5% 
1/16W
 R4510  1-218-964-81  METAL 
CHIP 
8.2K 
5% 
1/16W
 R4513  1-218-977-11  METAL 
CHIP 
100K 
5% 
1/16W
   
 
< COMPOSITION CIRCUIT BLOCK >
  RB4500  1-234-375-21 
RES, NETWORK  1K (1005X4)
  RB4501  1-234-388-21 
RES, NETWORK  1.5K (1005X4)
   
 
< SWITCH >
* S4500  1-786-914-51  SWITCH, TACTILE
 S4501  (Not 
supplied)  SWITCH, 
TACTILE
   
 
< SENSOR >
* SE4500  1-487-118-31  GMR SENSOR
   
A-1994-888-A  PD-1029 BOARD, COMPLETE (SERVICE)
(Projector Model)
   
 
******************************
(IC8010 and S4601 are not supplied, but they are included in PD-1029 COMPLETE 
BOARD (SERVICE).)
(BT4600 is not included in PD-1029 COMPLETE BOARD (SERVICE).)
   
 
< BATTERY HOLDER >
 BH4600  1-251-928-21 
SOCKET, BATTERY
   
 
< BATTERY >
 BT4600  1-756-134-15 
BATTERY, LITHIUM (SECONDARY)
   
 
< CAPACITOR >
 C3700  1-118-386-11  CERAMIC 
CHIP  0.1uF 
10%  16V
 C3701  1-118-386-11  CERAMIC 
CHIP  0.1uF 
10%  16V
* C4601  1-116-738-11  CERAMIC CHIP  1uF 
10% 
6.3V
* C4603  1-118-458-11  CERAMIC CHIP  0.1uF 
10% 
6.3V
 C8040  1-118-045-11  CERAMIC 
CHIP  2.2uF 
10%  25V
 C8041  1-116-729-11  CERAMIC 
CHIP  2.2uF 
20%  10V
 C8042  1-118-462-11  CERAMIC 
CHIP  1uF 
10%  10V
 C8043  1-118-462-11  CERAMIC 
CHIP  1uF 
10%  10V
 C8044  1-118-040-11  CERAMIC 
CHIP  2.2uF 
10%  16V
 C8045  1-116-729-11  CERAMIC 
CHIP  2.2uF 
20%  10V
 C8046  1-118-039-11  CERAMIC 
CHIP  1uF 
10%  25V
 C8047  1-116-729-11  CERAMIC 
CHIP  2.2uF 
20%  10V
 C8048  1-116-729-11  CERAMIC 
CHIP  2.2uF 
20%  10V
 C8049  1-118-039-11  CERAMIC 
CHIP  1uF 
10%  25V
   
 
< CONNECTOR >
  CN3700  1-821-652-11 
CONNECTOR, BOARD TO BOARD (REC
*  CN4600  1-821-501-11 
CONNECTOR, FPC (ZIF) 51P
*  CN8040  1-821-503-11 
CONNECTOR, FPC (ZIF) 39P
   
 
< FERRITE BEAD >
  FB3700  1-469-580-21 
INDUCTOR, FERRITE BEAD (1005)
   
 
< IC >
  IC8010  (Not supplied)  IC   BU79R272-E2
   
 
< COIL >
* L4600  1-481-102-21  INDUCTOR 
10uH
   
 
< RESISTOR >
 R3706  1-240-683-91  METAL 
CHIP 
100 
5% 
1/20W
 R4607  1-218-977-11  METAL 
CHIP 
100K 
5% 
1/16W
 R4608  1-218-954-11  METAL 
CHIP 
1.2K 
5% 
1/16W
 R4613  1-218-960-11  METAL 
CHIP 
3.9K 
5% 
1/16W
 R4614  1-218-964-81  METAL 
CHIP 
8.2K 
5% 
1/16W
 R4619  1-218-970-81  METAL 
CHIP 
27K 
5% 
1/16W
   
 
< COMPOSITION CIRCUIT BLOCK >
  RB4600  1-234-375-21 
RES, NETWORK  1K (1005X4)
  RB4601  1-234-388-21 
RES, NETWORK  1.5K (1005X4)
   
 
< SWITCH >
* S4600  1-786-914-51  SWITCH, TACTILE
 S4601  (Not 
supplied)  SWITCH, 
TACTILE
* S4602  1-786-914-51  SWITCH, TACTILE
   
 
< SENSOR >
* SE4600  1-487-118-31  GMR SENSOR
   
A-1994-765-A  PJ-1009 BOARD, COMPLETE (Projector Model)
   
 
**********************
(IC8504, IC8605, IC8606, IC8801 and R8815 are not supplied, but they are included in 
PJ-1009 COMPLETE BOARD.)
   
 
< CAPACITOR >
* C8510  1-116-720-11  CERAMIC CHIP  10uF 
20% 
6.3V
 C8540  1-118-386-11  CERAMIC 
CHIP  0.1uF 
10%  16V
* C8543  1-118-035-11  CERAMIC CHIP  0.1uF 
10% 
25V
 C8545  1-116-734-11  CERAMIC 
CHIP  1uF 
20%  16V
 C8547  1-118-386-11  CERAMIC 
CHIP  0.1uF 
10%  16V
 C8548  1-118-462-11  CERAMIC 
CHIP  1uF 
10%  10V
 C8549  1-118-462-11  CERAMIC 
CHIP  1uF 
10%  10V
 C8551  1-118-386-11  CERAMIC 
CHIP  0.1uF 
10%  16V
 C8602  1-164-856-81  CERAMIC 
CHIP  18PF 
5% 
50V
 C8603  1-164-856-81  CERAMIC 
CHIP  18PF 
5% 
50V
 C8605  1-118-386-11  CERAMIC 
CHIP  0.1uF 
10%  16V
 C8606  1-118-459-11  CERAMIC 
CHIP  0.01uF  10%  25V
 C8607  1-118-386-11  CERAMIC 
CHIP  0.1uF 
10%  16V
 C8609  1-118-386-11  CERAMIC 
CHIP  0.1uF 
10%  16V
 C8610  1-118-386-11  CERAMIC 
CHIP  0.1uF 
10%  16V
 C8618  1-118-462-11  CERAMIC 
CHIP  1uF 
10%  10V
 C8619  1-118-386-11  CERAMIC 
CHIP  0.1uF 
10%  16V
 C8627  1-118-462-11  CERAMIC 
CHIP  1uF 
10%  10V
 C8628  1-118-386-11  CERAMIC 
CHIP  0.1uF 
10%  16V
 C8701  1-118-386-11  CERAMIC 
CHIP  0.1uF 
10%  16V
 C8703  1-118-386-11  CERAMIC 
CHIP  0.1uF 
10%  16V
 C8710  1-118-462-11  CERAMIC 
CHIP  1uF 
10%  10V
 C8801  1-118-462-11  CERAMIC 
CHIP  1uF 
10%  10V
 C8803  1-118-037-11  CERAMIC 
CHIP  0.22uF  10%  25V
 C8804  1-118-039-11  CERAMIC 
CHIP  1uF 
10%  25V
 C8805  1-116-729-11  CERAMIC 
CHIP  2.2uF 
20%  10V
 C8806  1-118-386-11  CERAMIC 
CHIP  0.1uF 
10%  16V
 C8810  1-116-729-11  CERAMIC 
CHIP  2.2uF 
20%  10V
* C8814  1-116-720-11  CERAMIC CHIP  10uF 
20% 
6.3V
 C8816  1-118-462-11  CERAMIC 
CHIP  1uF 
10%  10V
 C8817  1-118-386-11  CERAMIC 
CHIP  0.1uF 
10%  16V
 C8818  1-118-386-11  CERAMIC 
CHIP  0.1uF 
10%  16V
 C8824  1-118-386-11  CERAMIC 
CHIP  0.1uF 
10%  16V
   
 
< CONNECTOR >
*  CN8502  1-816-643-51 
FFC/CONNECTOR, FPC (LIF) 10P
  CN8503  1-822-395-51 
CONNECTOR, BOARD TO BOARD 60P
  CN8504  1-842-897-11 
CONNECTOR, FPC (ZIF) 45P
   
 
< DIODE >
  D8501 
6-503-126-01 
DIODE   DA2S10100K8
  D8801 
6-502-934-01 
DIODE   DB2S31100K8
   
 
< FERRITE BEAD >
  FB8601  1-481-984-21 
EMI FERRITE (SMD)(1005)
   
 
< IC >
  IC8504  (Not supplied)  IC   MM3411A10URE
  IC8605  (Not supplied)  IC   DPP2601
  IC8606  (Not supplied)  IC   W25X40CLPYA1
*  IC8701  6-721-275-01 
IC   W948D6FBHX5E-ER25
  IC8801  (Not supplied)  IC   PAD1000YFFR
   
 
< COIL >
 L8801  1-481-035-11  INDUCTOR 
10uH
 L8802  1-457-526-11  INDUCTOR 
2.2uH
  
 
TRANSISTOR 
>
 Q301  6-550-576-01  TRANSISTOR  SSM6E01TU
   
 
< RESISTOR >
 R8518  1-218-959-11  METAL 
CHIP 
3.3K 
5% 
1/16W
 R8519  1-218-977-11  METAL 
CHIP 
100K 
5% 
1/16W
 R8520  1-220-398-11  METAL 
CHIP 
1.5M 
5% 
1/16W
 R8521  1-218-967-11  METAL 
CHIP 
15K 
5% 
1/16W
 R8522  1-218-968-11  METAL 
CHIP 
18K 
5% 
1/16W
GY-1005
MM-102
PD-1028
PD-1029
PJ-1009
Page of 60
Display

Sony HDR-CX240 / HDR-CX240E / HDR-PJ240 / HDR-PJ240E / HDR-PJ270 / HDR-PJ270E / HDR-PJ275 Service Manual ▷ Download

  • DOWNLOAD Sony HDR-CX240 / HDR-CX240E / HDR-PJ240 / HDR-PJ240E / HDR-PJ270 / HDR-PJ270E / HDR-PJ275 Service Manual ↓ Size: 5.99 MB | Pages: 60 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony HDR-CX240 / HDR-CX240E / HDR-PJ240 / HDR-PJ240E / HDR-PJ270 / HDR-PJ270E / HDR-PJ275 in PDF for free, which will help you to disassemble, recover, fix and repair Sony HDR-CX240 / HDR-CX240E / HDR-PJ240 / HDR-PJ240E / HDR-PJ270 / HDR-PJ270E / HDR-PJ275 Movie. Information contained in Sony HDR-CX240 / HDR-CX240E / HDR-PJ240 / HDR-PJ240E / HDR-PJ270 / HDR-PJ270E / HDR-PJ275 Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.