Sony DCR-TRV940 / DCR-TRV940E / DCR-TRV950 / DCR-TRV950E (serv.man2) Service Manual ▷ View online
2-14
DCR-TRV940/TRV940E/TRV950/TRV950E
VC-288
DB-014
JK-222
DB-014 board
Eject switch
Control switch block
(PS-1870)
(PS-1870)
VC-288 board
Adjustment remote
commander (RM-95)
commander (RM-95)
AC power
adaptor
adaptor
AC IN
Mechanism deck
Monitor
FP-498 flexible board
FP-499 flexible board
Battery panel block
JK-222 board
CPC-8 jig
(J-6082-388-A)
(J-6082-388-A)
When exiting the Forced VTR Power ON mode, connect the control
switch block (PS-1870) to the CN7201 of DB-014 board. Or,
when ejecting the cassette, connect the control switch block (PS-1770)
to the CN402 of ME-020 board. and press the EJECT switch.
switch block (PS-1870) to the CN7201 of DB-014 board. Or,
when ejecting the cassette, connect the control switch block (PS-1770)
to the CN402 of ME-020 board. and press the EJECT switch.
Connection to Check the VTR Section
To check the VTR section, set the VTR to the Forced VTR power ON mode. (Or, connect the control switch block (PS-1870)
to the CN7201 of DB-014 board and set the power switch to the VIDEO position.)
Operate the VTR function using the adjustment remote commander (with the HOLD switch set in the OFF position).
to the CN7201 of DB-014 board and set the power switch to the VIDEO position.)
Operate the VTR function using the adjustment remote commander (with the HOLD switch set in the OFF position).
Setting the Forced VTR Power ON mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 02 and
2) Select page: D, address: 10, set data: 02 and
press the PAUSE button of the adjustment remote
commander.
commander.
Exiting the Forced VTR Power ON mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, data: 00, and press the PAUSE
2) Select page: D, address: 10, data: 00, and press the PAUSE
button of the adjustment remote commander.
3) Select page: 0, address: 01, and set data: 00.
[SERVICE POSITION TO CHECK THE VTR SECTION]
2-15
DCR-TRV940/TRV940E/TRV950/TRV950E
2-21.FLASH UNIT
Note: High-voltage cautions.
(See page 1-1)
Note: High-voltage cautions.
(See page 1-1)
8
Screw (M1.7)
0
Screw (M1.7)
qa
Screw
qs
ST insulating sheet
qf
ST cabinet (lower)
9
ST cover (upper)
2
Screw
(M1.7
(M1.7
×
4)
qd
Two screws
(M1.7
(M1.7
×
4)
5
Two claws
4
Two claws
qg
Two claws
qh
Flash unit
7
Remove the flexible board
from two claws.
from two claws.
3
Screw
(M1.7
(M1.7
×
4)
6
ST cabinet (upper)
1
Push the lever.
2-22.EVF BLOCK
1
Three screws
(M1.7)
(M1.7)
2
EVF block
2-16
DCR-TRV940/TRV940E/TRV950/TRV950E
2-23.FP-497 FLEXIBLE BOARD
Note: When installing FP-497 flexible board
and FP-547 flexible board,
please attach, as shown in a figure.
please attach, as shown in a figure.
2
Two screws
(M1.7)
(M1.7)
6
External connector
4
Two screws
(M1.7
(M1.7
×
2.5)
8
FP-497 flexible board
5
1
3
Top cabinet assy
7
Screw
(M1.7
(M1.7
×
2.5)
FP-497 flexible board
FP-547 flexible board
2-17
DCR-TRV940/TRV940E/TRV950/TRV950E
3
Control switch block
(PS-1870)
(PS-1870)
1
Two screws
(M1.7
(M1.7
×
2.5)
2
Two screws
(M1.7
(M1.7
×
4)
2-24.CONTROL SWITCH BLOCK (PS-1870)
2
Two screws
(M1.7
(M1.7
×
4)
3
Two screws
(M1.7
(M1.7
×
4)
4
CS frame
1
Flexible board (JK-222)
(CN4005)
(CN4005)
5
Three screws
(M1.7
(M1.7
×
2.5)
6
SE-132 board
SE-132
2-25.SE-132 BOARD
Click on the first or last page to see other DCR-TRV940 / DCR-TRV940E / DCR-TRV950 / DCR-TRV950E (serv.man2) service manuals if exist.