Sony DCR-TRV40E / DCR-TRV50E Service Manual ▷ View online
— 21 —
DCR-TRV40E/TRV50E
2-17. CD-381 BOARD, 690C (CZ) BLOCK ASSEMBLY (LENS DEVICE)
A
B
A
B
3
Tapping screw
(M1.7
×
3.5)
6
CD heat sink assembly
5
JK-219 board
Lens frame
7
CD-381 board,
690C (CZ) block assembly
(Lens device)
(Lens device)
2
Antenna (2.4G)
1
Two screws
(M1.7
×
2.5),
lock ace, p2
4
Tapping screw
(M1.7
×
3.5)
(TRV50E)
2-18. GRIP COVER
1
Two screws (M1.7
×
4),
lock ace, p2
2
Grip cover
3
Turn over the insulating sheet
4
Flash unit
Shorting jig
(1k
(1k
Ω
/ 1w)
Power supply
capacitor
The power supply capacitor of the Flash unit is
charged to the voltage as high as 300 V at a
maximum. The high voltage is not discharged
even after the main power of the machine is
simply turned off and the charged potential still
remains.
Discharge the residual voltage by referring to
Service Note (page XX).
charged to the voltage as high as 300 V at a
maximum. The high voltage is not discharged
even after the main power of the machine is
simply turned off and the charged potential still
remains.
Discharge the residual voltage by referring to
Service Note (page XX).
Caution
Caution
— 22 —
DCR-TRV40E/TRV50E
2-19. CS FRAME ASSEMBLY
1
FP-460 flexible board
(15P)
6
CS frame assembly
3
Two tapping screws
(M1.7
×
5)
2
Three tapping screws
(M1.7
×
5)
4
Two tapping screws
(M1.7
×
3.5)
5
Four dowels
2
Flash unit
1
Tapping screw
(M1.7
×
5)
2-20. FLASH UNIT
— 23 —
DCR-TRV40E/TRV50E
2-21. CONTROL SWITCH BLOCK (PS-2890)
3
Control switch block
(PS-2890)
2
Control switch block
(PS-2890)(8P)
1
Tapping screw
(M1.7
×
5)
2-22. MEMORY STICK CONNECTOR
Eject knob
Caution
When removing the
3
Grip block assembly, be careful
that it can be easily caught by the dowel and the
protrusion of the Eject knob shown in the illustration.
Because the Eject knob is caught by the Grip block
assembly, the Eject knob can be easily removed if it is
separated from the Grip block assembly.
protrusion of the Eject knob shown in the illustration.
Because the Eject knob is caught by the Grip block
assembly, the Eject knob can be easily removed if it is
separated from the Grip block assembly.
Dowel
7
Memory stick connector
4
Eject knob
1
Two tapping screws
(M1.7
×
5)
3
Grip lock assembly
6
Control switch block
(FK-2890)(10P)
5
Screw (M1.7
×
2.5),
lock ace, p2
2
Two screws
(M1.7
×
2.5),
lock ace, p2
— 24 —
DCR-TRV40E/TRV50E
2-23. CK-115 BOARD, SPEAKER (2.0CM)
4
Two claws
1
FP-461 flexible board (6P)
qa
Two tapping screws
(M1.7
×
3.5)
0
SP insulating sheet
3
Tapping screw
(M1.7
×
3.5)
qs
Speaker retainer assembly
qd
Speaker (2.0cm)
8
Speaker (2P)
2
Harness (PC-122)(10P)
5
Harness (PC-121)(20P)
9
CK-115 board
6
Control switch block
(KP-2890)(8P)
7
Control switch block
(KY-2890)(10P)
2-24. HINGE SECTION
1
FP-461 flexible board (6P)
2
Harness (PC-122)(10P)
3
Harness (PC-121)(20P)
5
Hinge section
4
Two screws
(M1.7
×
4),
lock ace, p2
Click on the first or last page to see other DCR-TRV40E / DCR-TRV50E service manuals if exist.