Sony DCR-TRV40 / DCR-TRV40E / DCR-TRV50 / DCR-TRV50E (serv.man2) Service Manual ▷ View online
2-19
DCR-TRV40/TRV40E/TRV50/TRV50E
VC-283
DD-176
[SERVICE POSITION TO CHECK THE CAMERA SECTION]
Connection to Check the Camera Section
To check the CAMERA section, set the CAMERA to the “Forced camera power ON” mode.
When you want to operate the ZOOM and FOCUS, use the controls on the remote commander (with HOLD switch off).
When you want to operate the ZOOM and FOCUS, use the controls on the remote commander (with HOLD switch off).
Setting the “Forced Camera Power ON” mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: D, address: 10, set data: 01, and
2) Select page: 0, address: 10, and set data: 00.
3) Select page: D, address: 10, set data: 01, and
press the PAUSE button of the adjustment remote
commander.
commander.
Exiting the “Forced Camera Power ON” mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: D, address: 10, set data: 00, and press
the PAUSE button of the adjustment remote commander.
4) Select page: 0, address: 01, and set data: 00.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: D, address: 10, set data: 00, and press
the PAUSE button of the adjustment remote commander.
4) Select page: 0, address: 01, and set data: 00.
VC-283 board
JK-219 board
MA-408 board
Adjustment remote
commander (RM-95)
commander (RM-95)
AC power
adaptor
adaptor
AC IN
Mechanism deck
Lens section
DD-176 board
Extension cord (100P)
(J-6082-413-A)
(J-6082-413-A)
Battery terminal board
(6P)
(6P)
2-20
DCR-TRV40/TRV40E/TRV50/TRV50E
2-24.CS FRAME ASSEMBLY
(Before starting disassembling, remove the glip cover and discharge the power supply capacitor referring to section 2-13)
2-25.FLASH UNIT
1
FP-460 flexible board
(15P)
6
CS frame assembly
3
Two tapping screws
(M1.7
×
5)
2
Three tapping screws
(M1.7
×
5)
4
Two tapping screws
(M1.7
×
3.5)
5
Four dowels
3
Flash unit
2
Remove the flexible board (45P)
from the CN4607.
1
Tapping screw
(M1.7
×
5)
2-21
DCR-TRV40/TRV40E/TRV50/TRV50E
2-26.CONTROL SWITCH BLOCK (PS-2890)
3
Control switch block
(PS-2890)
2
Control switch block
(PS-2890)(8P)
1
Tapping screw
(M1.7
×
5)
2-27.MEMORY STICK CONNECTOR
Eject knob
Caution
When removing the
3
Grip block assembly, be careful
that it can be easily caught by the dowel and the
protrusion of the Eject knob shown in the illustration.
Because the Eject knob is caught by the Grip block
assembly, the Eject knob can be easily removed if it is
separated from the Grip block assembly.
protrusion of the Eject knob shown in the illustration.
Because the Eject knob is caught by the Grip block
assembly, the Eject knob can be easily removed if it is
separated from the Grip block assembly.
Dowel
7
Memory stick connector
4
Eject knob
1
Two tapping screws
(M1.7
×
5)
3
Grip lock assembly
6
Control switch block
(FK-2890)(10P)
5
Screw (M1.7
×
2.5),
lock ace, p2
2
Two screws
(M1.7
×
2.5),
lock ace, p2
2-22
DCR-TRV40/TRV40E/TRV50/TRV50E
2-28.CK-115 BOARD, SPEAKER (2.0CM)
4
Two claws
1
FP-461 flexible board (6P)
qa
Two tapping screws
(M1.7
×
3.5)
0
SP insulating sheet
3
Tapping screw
(M1.7
×
3.5)
qs
Speaker retainer assembly
qd
Speaker (2.0cm)
8
Speaker (2P)
2
Harness (PC-122)(10P)
5
Harness (PC-121)(20P)
9
CK-115 board
6
Control switch block
(KP-2890)(8P)
7
Control switch block
(KY-2890)(10P)
2-29.HINGE SECTION
1
FP-461 flexible board (6P)
2
Harness (PC-122)(10P)
3
Harness (PC-121)(20P)
5
Hinge section
4
Two screws
(M1.7
×
4),
lock ace, p2
Click on the first or last page to see other DCR-TRV40 / DCR-TRV40E / DCR-TRV50 / DCR-TRV50E (serv.man2) service manuals if exist.