Sony DCR-TRV38 / DCR-TRV38E / DCR-TRV39 (serv.man2) Service Manual ▷ View online
2-9
DCR-TRV38/TRV38E/TRV39
2-12.BATTERY TERMINAL BOARD
1
Screw
(M1.7
×
4),
lock ace, p2
3
BT panel assembly
4
Battery terminal board
2
Strap bracket
(lower)
2-13.TOP CABINET ASSEMBLY
1
Dowel
2
Claw
3
Top cabinet assembly
2-10
DCR-TRV38/TRV38E/TRV39
2-14.EVF SECTION
DI-
089
089
2
Screw
(M1.7
×
2.5)
1
Screw
(M1.7
×
2.5)
3
Screw
(M1.7
×
2.5)
4
DI heat sink
assembly
7
Two tapping screws
(M1.7
×
5)
5
Peel off the tape.
6
Slide the EVF slightly
in the direction of the
arrow so that the two
screws
arrow so that the two
screws
7
become
visible.
8
FP-435 flexible board (20P)
9
EVF section
Tape (A)
Caution
FP-461 flexible board
Attach the Tape (A) as shown
in the illustration.
in the illustration.
2-11
DCR-TRV38/TRV38E/TRV39
2-15.VF LENS ASSEMBLY
A
2
Two tapping screws
(M1.7
×
5)
4
VF base
assembly
qa
VF lens assembly
9
LB-087 board,
Lamp guide
6
FP-435 Flexible
board (20P)
7
LCX033AN-J (16P)
qf
LB-087 board
qd
Lamp guide
8
Three claws
0
Four claws
5
VF electrostatic
sheet
3
Two claws
qs
Two claws
1
Raise the EVF in the
direction of the arrow
A
.
Prism sheet
Illuminator
LCX033AN-J
LCD Cushion
When separating the
9
LB-087 board and
Lamp guide from the
qs
VF lens assembly
by removing the three
8
claws, do not face
the side of the VF lens assembly on which
the LB-087 board is installed, downwards.
Because the Illuminator and others may fall
out of the VF lens assembly, hold the
illuminator and others using tape or paper
as shown to prevent them from falling.
Be careful on this point especially when
removing the LB-087 board and Lamp guide
because the three claws located in the VF
lens assembly are easy to break.
the LB-087 board is installed, downwards.
Because the Illuminator and others may fall
out of the VF lens assembly, hold the
illuminator and others using tape or paper
as shown to prevent them from falling.
Be careful on this point especially when
removing the LB-087 board and Lamp guide
because the three claws located in the VF
lens assembly are easy to break.
Hold the illuminator
and others using
tape or paper as
shown to prevent
them from falling.
and others using
tape or paper as
shown to prevent
them from falling.
Caution
2-12
DCR-TRV38/TRV38E/TRV39
2-16.FP-435 FLEXIBLE BOARD
3
VF flexible
retainer sheet
VF flexible
retainer sheet
retainer sheet
Caution
Caution
FP-435 Flexible board
4
FP-435 Flexible board
5
VF base assembly,
VF cabiet (lower) assembly,
FP-435 Flexible board
FP-435 Flexible board
Routing of the FP-435 flexible board
2
Flexible retainer sheet metal
1
Screw (M1.4
×
2.5),
lock ace
When installing, pass the FP-435 flexible
board as shown.
board as shown.
Click on the first or last page to see other DCR-TRV38 / DCR-TRV38E / DCR-TRV39 (serv.man2) service manuals if exist.