DOWNLOAD Sony DCR-TRV270E / DCR-TRV280 / DCR-TRV285E (serv.man2) Service Manual ↓ Size: 482.71 KB | Pages: 8 in PDF or view online for FREE

Model
DCR-TRV270E DCR-TRV280 DCR-TRV285E (serv.man2)
Pages
8
Size
482.71 KB
Type
PDF
Document
Service Manual
Brand
Device
Movie / LEVEL 1
File
dcr-trv270e-dcr-trv280-dcr-trv285e-sm2.pdf
Date

Sony DCR-TRV270E / DCR-TRV280 / DCR-TRV285E (serv.man2) Service Manual ▷ View online

— 2 —
DCR-TRV270E/TRV280/TRV285E
SPECIFICATIONS
SERIES
TM
Video camera recorder
System
Video recording system
2 rotary heads, Helical scanning system
Audio recording system
Rotary heads, PCM system
Quantization: 12 bits (Fs 32 kHz, stereo 1, 
stereo 2), 16 bits (Fs 48 kHz, stereo)
Video signal
DCR-TRV280:
NTSC color, EIA standards
DCR-TRV270E/285E:
PAL  color, CCIR standards
Usable cassette
8 mm video format cassette
Ta pe speed
DCR-TRV270E/285E:
DCR-TRV280:
SP: Approx. 28.67 mm/s
LP: Approx. 19.11 mm/s
SP: Approx. 28.70 mm/s 
LP: Approx. 19.13 mm/s
Recording/playback time 
SP:
DCR-TRV280:
(using 120 min. Hi8/Digital8 video cassette)
DCR-TRV270E/285E:
(using 90 min. Hi8/Digital8 video cassette)
DCR-TRV280:
(using 120 min. Hi8/Digital8 video cassette)
DCR-TRV270E/285E:
(using 90 min. Hi8/Digital8 video cassette)
3.0 mm (1/6 type) CCD (Charge Coupled
Device)
DCR-TRV280:
Gross: Approx. 460 000 pixels
Effective: Approx. 290 000 pixels
 1 h
LP: 1 h 30 min
Fast forward/rewind time
Approx. 5 min
Viewfinder
Electric viewfinder (monochrome)
Image device
DCR-TRV270E/285E:
Gross: Approx. 540 000 pixels
Effective: Approx. 350 000 pixels
Lens
Combined power zoom lens
Filter diameter: 37 mm (1 1/2 in.)
20 
× (Optical), 990 × (Digital)
F=1.6 - 2.4
Focal length
2.5 - 50 mm (1/8 - 2 in.)
When converted to a 35 mm still camera
42 - 840 mm (1 11/16 - 33 1/8 in.)
Color temperature
Auto
Minimum illumination
4 lx (lux) (F 1.6)
0 lx (lux) (in the NightShot plus mode)*
* Objects unable to be seen due to the dark can be 
shot with infrared lighting.
Input/Output connectors
Audio/Video output
AV MINIJAC K
Video signal: 1 Vp-p, 75 
Ω: (ohms), 
unbalanced, sync negative
Audio signal: 327 mV (at output impedance 
more than 47 k
Ω: (kilohms)), Output 
impedance with less than 2.2 k
Ω: (kilohms)
Stereo minijack (
φ 3.5 mm)
DV input/output
DCR-TRV280/285E:
4-pin connector
DCR-TRV270E:
4-pin connector
DV output
USB jack
mini-B
LCD screen
Picture
6.2 cm (2.5 type)
Total dot number
123 200 (560 
× 220)
General
Power requirements
DC 7.2 V (battery pack)
DC 8.4 V (AC Adaptor)
Average power consumption (when using the 
battery pack)
During camera recording using viewfinder
2.5 W
During camera recording using LCD
3.4 W
Operating temperature
0
°C to 40°C (32°F to 104°F)
Storage temperature
-20
°C to + 60°C (-4°F to + 140°F)
Dimensions (approx.)
85 
× 98 × 151 mm (3 3/8 × 3 7/8 × 6 in.) (w/h/
d)
Mass (Approx.)
780 g (1 lb 11 oz) main unit only
890 g (1 lb 15 oz) including the 
NP-FM30 rechargeable battery pack, Hi8/
Digital8 cassette, lens cap, and shoulder strap
Supplied accessories
AC Adaptor (1)
Power cord (1)
Lens cap (1)
Shoulder strap (1)
Wireless Remote Commander (1)
RMT-830: (DCR-TRV285E)
A/V connecting cable (1)
USB cable (1)
Rechargeable battery pack NP-FM30 (1)
CD-ROM “Picture Package Ver. 1.5” (1)
AC Adaptor   AC-L15A/L15B
Power requirements
AC 100 - 240 V, 50/60 Hz
Current consumption
0.35 - 0.18 A
Power consumption
18 W
Output voltage
DC 8.4 V, 1.5 A
Operating temperature
0
°C to 40°C (32°F to 104°F)
Storage temperature
-20
°C to + 60°C (-4°F to + 140°F)
Dimensions (approx.)
56 
× 31 × 100 mm (2 1/4 × 1 1/4 × 4 in.) (w/h/
d) excluding the projecting parts
Mass (approx.)
190 g (6.7 oz) excluding the mains lead
Rechargeable battery pack (NP-FM30)
Maximum output voltage
DC 8.4 V
Output voltage
DC 7.2 V
Capacity
5.0 Wh (700 mAh)
Dimensions (approx.)
38.2 
× 20.5 × 55.6 mm 
(1 9/16 
× 13/16 × 2 1/4 in.) (w/h/d)
Mass (approx.)
65 g (2.3 oz)
Operating temperature
0
°C to 40°C (32°F to 104°F)
Type
Lithium ion
Design and specifications are subject to change 
without notice
Camera Operations Guide (1)
See page 7.
— 3 —
DCR-TRV270E/TRV280/TRV285E
Table for differences of function
Model
DCR-TRV270E
DCR-TRV280
DCR-TRV285E
Remark
Destination
AEP, UK, EE, NE
US, CND, E, AR
NE, E, AUS, JE
Remote commander
a
Color system
PAL
NTSC
PAL
VTR Rec
a
a
a: with REC button
DV interface
DV OUT
DV IN/OUT
DV IN/OUT
• Abbreviation
AR
: Argentine model
AUS : Australian model
CND : Canadian model
EE
: East European model
JE
: Tourist model
NE
: North European model
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 
0
 OR DOTTED LINE WITH
MARK 
0
 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 
0
 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
1.
Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270°C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
— 4 —
DCR-TRV270E/TRV280/TRV285E
1.
Self-diagnosis Function
When problems occur while the unit is operating, the self-diagnosis
function starts working, and displays on the viewfinder or LCD
screen what to do. This function consists of two display; self-
diagnosis display and service mode display.
Details of the self-diagnosis functions are provided in the Instruction
manual.
2. Self-diagnosis Display
When problems occur while the unit is operating, the counter of the
viewfinder or LCD screen shows a 4-digit display consisting of an
alphabet and numbers, which blinks at 3.2 Hz. This 5-character
display indicates the “repaired by:”, “block” in which the problem
occurred, and “detailed code” of the problem.
3.
Service Mode Display
The service mode display shows up to six self-diagnosis codes shown in the past.
3-1.
Display Method
While pressing the “STOP” key, set the switch from OFF to “ON”, and continue pressing the “STOP” key for 5 seconds continuously. The
service mode will be displayed, and the counter will show the backup No. and the 5-character self-diagnosis codes.
3-2.
Switching of Backup No.
By rotating the control dial, past self-diagnosis codes will be shown in order. The backup No. in the [] indicates the order in which the
problem occurred. (If the number of problems which occurred is less than 6, only the number of problems which occurred will be shown.)
[1] : Occurred first time
[3] : Occurred third time
[5] : Occurred fifth time
[2] : Occurred second time
[4] : Occurred fourth time
[6] : Occurred the last time
3-3.
End of Display
Turning OFF the power supply will end the service mode display.
Order of previous errors
Backup No.
Self-diagnosis Codes
C : 3 1 : 1 1
[3]
Lights up
Viewfinder or LCD screen
[3] C : 3 1 : 1 1
1 1
3 1
C
Repaired by:
Refer to “4. Self-diagnosis Code Table”.
Indicates the appropriate
step to be taken.
E.g.
31 ....Reload the tape.
32 ....Turn on power again.
Block
Detailed Code
Blinks at 3.2Hz
C : Corrected by customer
H : Corrected by dealer
E : Corrected by service
engineer
Viewfinder or LCD screen
C : 3 1 : 1 1
Control Dial
Note: The “self-diagnosis display” data will not be erased (reset), when the lithium battery (CONTROL KEY BLOCK (CF-
5100): BT001) is removed.
SELF-DIAGNOSIS FUNCTION
— 5 —
DCR-TRV270E/TRV280/TRV285E
4.
Self-diagnosis Code Table
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
Block
Function
0
4
2
1
2
2
3
1
3
1
3
1
3
1
3
1
3
1
3
1
3
1
3
1
3
1
3
1
3
1
3
1
3
2
3
2
3
2
3
2
3
2
3
2
3
2
3
2
3
2
3
2
3
2
3
2
3
2
Detailed
Code
0
0
0
0
0
0
1
0
1
1
2
0
2
1
2
2
2
3
3
0
3
1
4
0
4
1
4
2
4
3
4
4
1
0
1
1
2
0
2
1
2
2
2
3
3
0
3
1
4
0
4
1
4
2
4
3
4
4
Symptom/State
Non-standard battery is used.
Condensation.
Video head is dirty.
LOAD direction. Loading does not
complete within specified time
UNLOAD direction. Loading does not
complete within specified time
T reel side tape slacking when unloading.
S reel side tape slacking when unloading.
T reel fault.
S reel fault.
FG fault when starting capstan.
FG fault during normal capstan operations.
FG fault when starting drum.
PG fault when starting drum.
FG fault during normal drum operations.
PG fault during normal drum operations.
Phase fault during normal drum operations.
LOAD direction loading motor time-
out.
UNLOAD direction loading motor
time-out.
T reel side tape slacking when
unloading.
S reel side tape slacking when
unloading.
T reel fault.
S reel fault.
FG fault when starting capstan.
FG fault during normal capstan
operations.
FG fault when starting drum.
PG fault when starting drum.
FG fault during normal drum
operations.
PG fault during normal drum
operations.
Phase fault during normal drum
operations.
Self-diagnosis Code
Repaired b
y:
Correction
Use the InfoLITHIUM battery.
Remove the cassette, and insert it again after one hour.
Clean with the optional cleaning cassette.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
Page of 8
Display

Sony DCR-TRV270E / DCR-TRV280 / DCR-TRV285E (serv.man2) Service Manual ▷ Download

  • DOWNLOAD Sony DCR-TRV270E / DCR-TRV280 / DCR-TRV285E (serv.man2) Service Manual ↓ Size: 482.71 KB | Pages: 8 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony DCR-TRV270E / DCR-TRV280 / DCR-TRV285E (serv.man2) in PDF for free, which will help you to disassemble, recover, fix and repair Sony DCR-TRV270E / DCR-TRV280 / DCR-TRV285E (serv.man2) Movie. Information contained in Sony DCR-TRV270E / DCR-TRV280 / DCR-TRV285E (serv.man2) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.