Sony DCR-TRV250 (serv.man2) Service Manual ▷ View online
2-5
DCR-TRV250
2-3. LCD MODULE
[SERVICE POSITION TO CHECK PD-180 BOARD]
1
Screw (M1.7)
3
Claw
5
Backlight unit
4
P flame
6
LCD module
2
Boss
AC IN
AC power
adaptor
adaptor
Adjustment remote
commander (RM-95)
commander (RM-95)
Info lithium battery
(L series)
(L series)
I/F unit for LANC control
(J-6082-521-A) (Note)
(J-6082-521-A) (Note)
Note : The "Jig Modification" is necessary for connecting
the adjusting remote commander to this set.
Modify the jig by referring to page 1-3.
the adjusting remote commander to this set.
Modify the jig by referring to page 1-3.
CPC jig connector
(J-6082-539-A) (Note)
(J-6082-539-A) (Note)
Contacting surface
Multi CPC jig
(J-6082-311-A)
(J-6082-311-A)
PD-180 board
LCD panel
Back light unit
CN5502
2-6
DCR-TRV250
2-4. CONTROL SWITCH BLOCK (PR-3000)
1
Two screws
(M1.7)
(M1.7)
2
Hinge bracket
3
Two screws
(M1.7)
(M1.7)
5
Control switch block
(PR-3000)
(PR-3000)
4
Claw
2-7
DCR-TRV250
2-5. VF LENS (B) ASSEMBLY
When installing
VF lens (B) assembly,
slide the
VF lens (B) assembly,
slide the
lever
in the arrow direction.
1
Raise the EVF in the
A
direction.
A
4
EVF cabinet (upper)
2
Two tapping screws
(M1.7)
5
VF lens (B) assembly
6
Flexible board
Slit
3
Claw
VF lens (B) assembly
Slit
2-8
DCR-TRV250
2-6. LB-083 BOARD
2
Two claws
Handle with care,
these are fragile.
these are fragile.
3
Two claws
prism sheet
After removing the liquid
crystal indicator module,
over wrap with adhesive tape
and paper in order not to let
the illuminator and
the prism sheet fall down.
crystal indicator module,
over wrap with adhesive tape
and paper in order not to let
the illuminator and
the prism sheet fall down.
Lamp guide
When removing the liquid crystal indicator module,
do not face down the side which the board is mounted.
Otherwise, the illuminator and the prism sheet
may fall down.
do not face down the side which the board is mounted.
Otherwise, the illuminator and the prism sheet
may fall down.
illuminator
4
Liquid crystal indicator module
5
Claw
7
LB-083 board
6
Claw
1
Flexible board
(CN702)
(CN702)
[SERVICE POSITION TO CHECK LB-083 BOARD]
AC IN
AC power
adaptor
adaptor
Adjustment remote
commander (RM-95)
commander (RM-95)
Info lithium battery
(L series)
(L series)
I/F unit for LANC control
(J-6082-521-A) (Note)
(J-6082-521-A) (Note)
CPC jig connector
(J-6082-539-A) (Note)
(J-6082-539-A) (Note)
Contacting surface
LB-083 board
VF lens (B) assembly
Note : The "Jig Modification" is necessary
for connecting the adjusting
remote commander to this set.
Modify the jig by referring to page 1-3.
for connecting the adjusting
remote commander to this set.
Modify the jig by referring to page 1-3.
Click on the first or last page to see other DCR-TRV250 (serv.man2) service manuals if exist.