Sony DCR-TRV22 / DCR-TRV22E (serv.man3) Service Manual ▷ View online
Quick Start Guide
9
Quick Start Guide
Recording a picture on the tape
(p. 25)
Monitoring the playback picture on the LCD
screen
(p. 39)
When you purchase your camcorder, the clock setting is set to off. If you want to record the date
and time for a picture, set the clock setting before recording (p. 22).
and time for a picture, set the clock setting before recording (p. 22).
2
Set the POWER switch
to CAMERA while
pressing the small
green button.
to CAMERA while
pressing the small
green button.
4
Press START/STOP. Your
camcorder starts recording.
To stop recording, press
START/STOP again.
To stop recording, press
START/STOP again.
1
Open the lens cap (p. 25).
3
Press OPEN
to open the
LCD panel.
The picture
appears on
the screen.
LCD panel.
The picture
appears on
the screen.
Viewfinder
When the LCD panel is closed,
pull out the viewfinder and
look at the picture in it.
Adjust the viewfinder lens to
your eyesight (p. 31).
When the LCD panel is closed,
pull out the viewfinder and
look at the picture in it.
Adjust the viewfinder lens to
your eyesight (p. 31).
1
Set the POWER
switch to VCR
while pressing the
small green button.
while pressing the
small green button.
3
Press
of the touch panel to
start playback.
Note
When using the touch panel, press
operation buttons lightly with your
finger supporting the LCD panel from
the back side of it. Do not press the
LCD screen with sharp objects.
When using the touch panel, press
operation buttons lightly with your
finger supporting the LCD panel from
the back side of it. Do not press the
LCD screen with sharp objects.
2
Press
of the touch panel to
rewind the tape.
Do not pick up your camcorder
by holding parts as illustrated.
by holding parts as illustrated.
Viewfinder
LCD panel
Battery pack
VCR
OFF(CHG)
POWER
CAMERA
MEMORY
VCR
OFF(CHG)
POWER
CAMERA
MEMORY
Quick Start Guide
10
Inserting the “Memory Stick”
(p. 109)
Open the lid of the “Memory Stick” slot. Insert the “Memory Stick” in the “Memory Stick”
slot as far as it can go with the b mark facing down as illustrated, then close the lid.
slot as far as it can go with the b mark facing down as illustrated, then close the lid.
While the access lamp is lit or flashing
Do not shake or strike your camcorder because your camcorder is reading the data from
the “Memory Stick” or recording the data on the “Memory Stick.” Do not turn the
power off, eject the “Memory Stick” or remove the battery pack. Otherwise, image data
breakdown may occur.
Do not shake or strike your camcorder because your camcorder is reading the data from
the “Memory Stick” or recording the data on the “Memory Stick.” Do not turn the
power off, eject the “Memory Stick” or remove the battery pack. Otherwise, image data
breakdown may occur.
Quick Start Guide – Recording on “Memory Stick”
(DCR-TRV22/TRV33 only)
(DCR-TRV22/TRV33 only)
Connecting the power cord
(p. 17)
Use the battery pack when using your camcorder outdoors (p. 16).
Open the DC IN
jack cover.
jack cover.
Connect the plug with its v
mark facing the battery.
mark facing the battery.
AC Adaptor (supplied)
Access lamp
b
mark
To eject the “Memory Stick,”
open the lid of the “Memory
Stick” slot, slide MEMORY
EJECT in the direction of the
arrow.
open the lid of the “Memory
Stick” slot, slide MEMORY
EJECT in the direction of the
arrow.
1
2
3
4
Fastening the grip belt
Fasten the grip belt firmly.
Fasten the grip belt firmly.
How to hold
your camcorder
your camcorder
1
2
3
Quick Start Guide
11
Recording still images on the “Memory Stick”
(p. 114)
Monitoring the playback still image on the LCD
screen
(p. 135)
1
Set the POWER
switch to MEMORY
while pressing the
small green button.
switch to MEMORY
while pressing the
small green button.
2
Press PLAY. The last
recorded image is
displayed.
recorded image is
displayed.
1
Open the lens cap (p. 25).
5
Press PHOTO deeply.
The image when you press
PHOTO deeply is recorded
on the "Memory Stick."
The image when you press
PHOTO deeply is recorded
on the "Memory Stick."
Viewfinder
When the LCD panel is closed,
pull out the viewfinder and look
at the picture in it.
Adjust the viewfinder lens to
your eyesight (p. 31).
When the LCD panel is closed,
pull out the viewfinder and look
at the picture in it.
Adjust the viewfinder lens to
your eyesight (p. 31).
3
Press OPEN
to open the
LCD panel.
The picture
appears on
the screen.
to open the
LCD panel.
The picture
appears on
the screen.
2
Set the POWER switch to
MEMORY while pressing
the small green button.
the small green button.
Make sure that the LOCK
switch is set to the left
(unlock) position.
(unlock) position.
4
Press PHOTO lightly.
You can record when the
green z stops flashing
and remains lit.
You can record when the
green z stops flashing
and remains lit.
Do not pick up your camcorder
by holding parts as illustrated.
by holding parts as illustrated.
Viewfinder
LCD panel
Battery pack
VCR
OFF(CHG)
POWER
CAMERA
MEMORY
12
FINE
640
101
101
FINE
640
When you purchase your
camcorder, the clock setting is
set to off. If you want to
record the date and time for a
picture, set the clock setting
before recording (p. 22).
camcorder, the clock setting is
set to off. If you want to
record the date and time for a
picture, set the clock setting
before recording (p. 22).
VCR
OFF(CHG)
POWER
CAMERA
MEMORY
PLAY
12
— Getting Started —
Using this manual
The instructions in this manual are for the 3 models listed in the table below. Before you
start reading this manual and operating your camcorder, check the model number by
looking at the bottom of your camcorder. The DCR-TRV33 is the model used for
illustration purposes. Otherwise, the model name is indicated in the illustrations. Any
differences in operation are clearly indicated in the text, for example, “DCR-TRV33
only.”
start reading this manual and operating your camcorder, check the model number by
looking at the bottom of your camcorder. The DCR-TRV33 is the model used for
illustration purposes. Otherwise, the model name is indicated in the illustrations. Any
differences in operation are clearly indicated in the text, for example, “DCR-TRV33
only.”
As you read through this manual, buttons and settings on your camcorder are shown in
capital letters.
capital letters.
After “Advanced Recording Operations” section of this
manual, position of the POWER switch is shown by the icons
below.
manual, position of the POWER switch is shown by the icons
below.
: Set the POWER switch to VCR.
: Set the POWER switch to CAMERA.
: Set the POWER switch to MEMORY.
(DCR-TRV22/TRV33 only)
(DCR-TRV22/TRV33 only)
When you carry out an operation, you can hear a beep to indicate that the operation is
being carried out.
being carried out.
Types of differences
DCR-
TRV19
TRV22
TRV33
Viewfinder
B&W
Color
Color
MEMORY mark*
—
z
z
(on the POWER switch)
AUDIO/VIDEO jack
z
**
z
z
S VIDEO jack
z
**
z
z
z
Provided
— Not provided
*
*
The models with MEMORY marked on the POWER switch is provided with
memory functions. See page 106 for details.
memory functions. See page 106 for details.
** Output only
VCR
OFF(CHG)
POWER
CAMERA
MEMORY
Click on the first or last page to see other DCR-TRV22 / DCR-TRV22E (serv.man3) service manuals if exist.