Sony DCR-TRV16E / DCR-TRV18E Service Manual ▷ View online
— 10 —
DCR-TRV16E/TRV18E/TRV116E/TRV118E
2-1.
LCD SECTION (PD-161 BOARD)
NOTE: Follow the disassembly procedure in the numerical order given.
PD-161
B
B
A
A
7
P cabinet (c) assembly,
Indication LCD block assembly
P cabinet (c) assembly
5
P cabinet (M)
8
Liquid crystal
indicator module
9
Back light
(Cold cathode fluorescent tube)
1
Screw
(M2
×
4),
lock ace, p2
6
FP-441 flexible board
(Indication LCD block assembly)
(20P)
(20P)
2
Screw
(M2
×
4),
lock ace, p2
0
PD-161 board,
P frame assembly
3
Two screws
(M2
×
4),
lock ace, p2
4
Five claws
Caution
Caution
FP-441 flexible board
The
7
P cabinet (C) assembly is securely
fixed in the LCD unit by the five
4
claws.
Because the Indication LCD block assembly
installed in the Cabinet (C) assembly is
connected to the PD-161 board with the
FP-441 flexible board, the flexible board
may be damaged if the Cabinet (C)
assembly is removed forcibly.
Be careful not to damage the flexible board.
installed in the Cabinet (C) assembly is
connected to the PD-161 board with the
FP-441 flexible board, the flexible board
may be damaged if the Cabinet (C)
assembly is removed forcibly.
Be careful not to damage the flexible board.
Indication LCD
block assembly
block assembly
— 11 —
DCR-TRV16E/TRV18E/TRV116E/TRV118E
2-2.
EVF SECTION (LB-077 BOARD)
B
A
2
Two tapping screws
(M1.7
×
6)
4
VF cabinet (upper)
assembly
6
VF lens assembly
7
LB-077 board,
Lamp guide
q;
LB-077 board
9
Lamp guide
5
Three claws
Prism sheet
Illuminator
3
Two claws
8
Two claws
1
Raise the EVF in the
direction of the arrow
A
and slide it in the direction
of the arrow
of the arrow
B
.
When separating the
7
LB-077 board and
Lamp guide from the
6
VF lens assembly
by removing the three
5
claws, do not face
the side of the VF lens assembly on which
the LB-077 board is installed, downwards.
Because the Illuminator and others may fall
out of the VF lens assembly, hold the
illuminator and others using tape or paper
as shown to prevent them from falling.
Be careful on this point especially when
removing the LB-077 board and Lamp guide
because the three claws located in the VF
lens assembly are easy to break.
the LB-077 board is installed, downwards.
Because the Illuminator and others may fall
out of the VF lens assembly, hold the
illuminator and others using tape or paper
as shown to prevent them from falling.
Be careful on this point especially when
removing the LB-077 board and Lamp guide
because the three claws located in the VF
lens assembly are easy to break.
Hold the illuminator
and others using
tape or paper as
shown to prevent
them from falling.
and others using
tape or paper as
shown to prevent
them from falling.
Caution
— 12 —
DCR-TRV16E/TRV18E/TRV116E/TRV118E
2-3.
FRONT PANEL SECTION
4
S
crew
(M1.7
×
4),
lock ace, p2
1
S
crew
(M1.7
×
4),
lock ace, p2
5
Remove the Front panel section
in the direction of the arrow
A
.
A
3
Open the
jack cover assembly
7
Front panel section
Caution
2
S
crew
(M1.7
×
4),
lock ace, p2
6
FP-437 flexible board
(24P)
Because the
7
Front panel section is connected
to the main unit by the
6
FP-437 flexible board,
the flexible board may be damaged if you remove
the Front panel section forcibly.
Be very careful not to damage the flexible board.
the Front panel section forcibly.
Be very careful not to damage the flexible board.
Caution
2-4.
MA-409, FB-219 BOARDS
1
Microphone (4P)
8
MA-409 board
MA-409 board
Route the harness of the Microphone
underneath the MA-409 board as shown
in the illustration below.
underneath the MA-409 board as shown
in the illustration below.
4
FB-219 board
2
Screw
(M1.7
×
2.5), p
5
Tapping screw
(M1.7
×
3.5)
3
Tapping screw
(M1.7
×
3.5)
7
Focus button
FP-444 flexible board
6
Focus button retainer
Caution
— 13 —
DCR-TRV16E/TRV18E/TRV116E/TRV118E
2-5.
TOP CABINET ASSEMBLY
3
Screw (M1.7
×
4),
lock ace, p2
2
Screw (M1.7
×
4),
lock ace, p2
4
Claw
5
Top cabinet assembly
1
Slide the EVF
in the direction of the arrow.
2-6.
CABINET (R) SECTION
5
Remove the Cabinet (R) section
in the direction of the arrow.
Because the
7
Cabinet (R) section is connected
to the main unit using the
6
FP-434 flexible board,
the flexible board may be damaged if you remove
the Cabinet (R) section forcibly. Be very careful not
to damage the flexible board.
the Cabinet (R) section forcibly. Be very careful not
to damage the flexible board.
7
Cabinet (R) section
4
Screw
(M1.7
×
4),
lock ace, p2
1
Screw
(M1.7
×
4),
lock ace, p2
2
Screw
(M1.7
×
4),
lock ace, p2
3
Open the
cassette lid
6
FP-434 flexible board
(40P)
Caution
Click on the first or last page to see other DCR-TRV16E / DCR-TRV18E service manuals if exist.