DOWNLOAD Sony DCR-TRV15 / DCR-TRV17 Service Manual ↓ Size: 7.1 MB | Pages: 37 in PDF or view online for FREE

Model
DCR-TRV15 DCR-TRV17
Pages
37
Size
7.1 MB
Type
PDF
Document
Service Manual
Brand
Device
Movie / LEVEL 3
File
dcr-trv15-dcr-trv17.pdf
Date

Sony DCR-TRV15 / DCR-TRV17 Service Manual ▷ View online

DIGITAL VIDEO CAMERA RECORDER
The information that is not described in this
Service Manual is described in the LEVEL 2
Service Manual.
When repairing, use this manual together with
LEVEL 2 Service Manual.
Contents of LEVEL 2 Service Manual
SERVICE NOTE
1. GENERAL
2. DISASSEMBLY
3. BLOCK DIAGRAMS
4. PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
5. ADJUSTMENTS
6. REPAIR PARTS LIST
OVERALL
POWER
CD-303 BOARD
FP-100, FP-228, FP-102 FLEXIBLE BOARD
FP-305 BOARD
CONTROL SWITCH BLOCK (PS-1700)
MS-070 BOARD
LB-069 BOARD
CK-101 BOARD
FB-218 BOARD
JK-204 BOARD
MA-403 BOARD
FP-309, FP-310, FP-311 FLEXIBLE BOARD
PD-143 BOARD
EXPLODED VIEWS
ELECTRICAL PARTS LIST
SERVICE MANUAL
US Model
Canadian Model
Argentina Model
Brazilian Model
DCR-TRV17
E Model
Hong Kong Model
Korea Model
Tourist Model
DCR-TRV15/TRV17
SERVICE MANUAL
J MECHANISM
Level 3
DCR-TRV15/TRV17
RMT-814
Photo : DCR-TRV17
RMT-814
Ver 1.0  2001. 03
— 2 —
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 
0
 OR DOTTED LINE WITH
MARK 
0
 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 
0
 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
1.
Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
TABLE OF CONTENTS
4.
PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
4-2.
PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS ·········································· 4-11
• VC-260 (CAMERA A/D CONV., TIMING
GENERATOR, CAMERA SIGNAL PROCESS,
IRIS/FOCUS/ZOOM DRIVE, DV SIGNAL PROCESS,
DV INTERFACE, RF AMP, VIDEO A/D CONV.,
LASER AVLINK, HI/CAMERA CONTROL,
MECHA CONTROL, DRUM/CAPSTAN DRIVE,
EVF VIDEO, AUDIO, IN/OUT, AUDIO A/D D/A,
STEADY SHOT, CONNECTOR, DC IN, CHARGE,
DC-DC CONVERTER)
PRINTED WIRING BOARD ······················· 4-11
• VC-260 (CAMERA A/D CONV., TIMING
GENERATOR)(1/18)
SCHEMATIC DIAGRAM ···························· 4-15
• VC-260 (CAMERA SIGNAL PROCESS)(2/18)
SCHEMATIC DIAGRAM ···························· 4-17
• VC-260 (IRIS/FOCUS/ZOOM DRIVE)(3/18)
SCHEMATIC DIAGRAM ···························· 4-19
• VC-260 (DV SIGNAL PROCESS)(4/18)
SCHEMATIC DIAGRAM ···························· 4-21
• VC-260 (DV INTERFACE)(5/18)
SCHEMATIC DIAGRAM ···························· 4-23
• VC-260 (RF AMP)(6/18)
SCHEMATIC DIAGRAM ···························· 4-25
• VC-260 (VIDEO IN/OUT)(7/18)
SCHEMATIC DIAGRAM ···························· 4-27
• VC-260 (VIDEO A/D CONV.)(8/18)
SCHEMATIC DIAGRAM ···························· 4-29
• VC-260 (LASER AVLINK)(9/18)
SCHEMATIC DIAGRAM ···························· 4-31
• VC-260 (HI/CAMERA CONTROL)(10/18)
SCHEMATIC DIAGRAM ···························· 4-33
• VC-260 (MECHA CONTROL)(11/18)
SCHEMATIC DIAGRAM ···························· 4-35
• VC-260 (DRUM/CAPSTAN DRIVE)(12/18)
SCHEMATIC DIAGRAM ···························· 4-37
• VC-260 (EVF VIDEO)(13/18)
SCHEMATIC DIAGRAM ···························· 4-39
• VC-260 (AUDIO, IN/OUT, AUDIO A/D D/A)(14/18)
SCHEMATIC DIAGRAM ···························· 4-41
• VC-260 (STEADY SHOT)(15/18)
SCHEMATIC DIAGRAM ···························· 4-43
• VC-260 (CONNECTOR)(16/18)
SCHEMATIC DIAGRAM ···························· 4-45
• VC-260 (DC IN, CHARGE)(17/18)
SCHEMATIC DIAGRAM ···························· 4-47
• VC-260 (DC-DC CONVERTER)(18/18)
SCHEMATIC DIAGRAM ···························· 4-49
4-3.
WAVEFORMS ······························································ 4-93
4-4.
MOUNTED PARTS LOCATION ································· 4-95
6.
REPAIR PARTS LIST
6-2.
ELECTRICAL PARTS LIST ········································ 6-17
SECTION 4
PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS
DCR-TRV15/TRV17
DCR-TRV15/TRV17
VC-260
CAMERA PROCESS, LENS DRIVE,
DV PROCESSOR, VIDEO, AUDIO,
HI/CAMERA CONTROL, SERVO, 
DC-DC CONVERTER
For printed wiring board
• Refer to pages 4-95 for parts location.
• This board consists of multiple layers. However, only
the sides (layers) A and B are shown.
• Chip parts
          Transistor
            Diode
There are a few cases that the part printed on
this diagram isn’t mounted in this model.
C
B
E
5
6
4
2
1
3
8
5
1
4
3
2
1
3
2
1
1
2
4
3
4-12
CAMERA PROCESS, LENS DRIVE, DV PROCESSOR, VIDEO, AUDIO, HI/MECHA CONTROL, SERVO, DC-DC CONVERTER
VC-260
VC-260 (CAMERA A/D CONV., TIMING GENERATOR, CAMERA SIGNAL PROCESS, IRIS/FOCUS/ZOOM DRIVE, DV SIGNAL PROCESS, DV INTERFACE, RF AMP, VIDEO A/D CONV.,
  LASER AVLINK, HI/CAMERA CONTROL, MECHA CONTROL, DRUM/CAPSTAN DRIVE, EVF VIDEO, AUDIO, IN/OUT, AUDIO A/D D/A, STEADY SHOT, CONNECTOR, DC IN, CHARGE, DC-DC CONVERTER)
  PRINTED WIRING BOARD
— Ref. No. VC-260 Board; 20,000 Series —
4-2. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS
  : Uses unleaded solder.
Page of 37
Display

Sony DCR-TRV15 / DCR-TRV17 Service Manual ▷ Download

  • DOWNLOAD Sony DCR-TRV15 / DCR-TRV17 Service Manual ↓ Size: 7.1 MB | Pages: 37 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony DCR-TRV15 / DCR-TRV17 in PDF for free, which will help you to disassemble, recover, fix and repair Sony DCR-TRV15 / DCR-TRV17 Movie. Information contained in Sony DCR-TRV15 / DCR-TRV17 Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.