Sony DCR-SX33E / DCR-SX34E / DCR-SX43 / DCR-SX43E / DCR-SX44 / DCR-SX44E / DCR-SX53E / DCR-SX63 / DCR-SX63E (serv.man3) Service Manual ▷ View online
Sony Corporation
Revision History
985273455.pdf
2015C08-1
© 2015.03
Published by Sony Techno Create Corporation
Ver. 3.0 2015.03
9-852-734-55
Auto-ADJ
For adjusting these models, the Adjust manual and the Adjust station are required.
For details of installing the Adjust station and the Adjust manual, please refer to the Service manual ADJ
of HDR-TG5/TG5E/TG5V/TG5VE/TG7VE.
For details of installing the Adjust station and the Adjust manual, please refer to the Service manual ADJ
of HDR-TG5/TG5E/TG5V/TG5VE/TG7VE.
Adjust station
It is the software to start Adjust manual for the specified product.
It is the software to start Adjust manual for the specified product.
Adjust manual
It is the software to adjust and check digital cameras and camcorders for service. The executable file (.msi) for each product is available.
For the operating procedure of the Adjust manual, after starting the Adjust manual software, please refer to “About the Adjust manual soft-
ware” on the ‘NOTE’ tab.
It is the software to adjust and check digital cameras and camcorders for service. The executable file (.msi) for each product is available.
For the operating procedure of the Adjust manual, after starting the Adjust manual software, please refer to “About the Adjust manual soft-
ware” on the ‘NOTE’ tab.
Note: In case of updating the Adjust manual or the Adjust station program, install with overwriting it.
Adjust manual Installation
Note 1: Be sure to install Adjust station first.
Note 2: Do not change the initially set folder to which the program is forwarded to.
Note 2: Do not change the initially set folder to which the program is forwarded to.
1. Download the Adjust manual (DCR-SX43_Series_AM_Ver_
□.□
_x64
.zip) from TISS home page.
2. Double-click
Setup.msi.
3. The installation window appears.
Click [Next]. Adjust manual installation starts.
4. The widow to choose the destination folder of the Adjust manual program appears.
Click
Click
[Next].
5. When Adjust manual is installed normally, the confirmation window appears.
Click [Close]. The installer is closed.
DCR-SX33E/SX34E/SX43/SX43E/SX44/SX44E/SX53E/SX63/SX63E_ADJ
DCR-SX33E/SX34E/SX43/SX43E/SX44/
SX44E/SX53E/SX63/SX63E
*: S.M. revised only top cover.
Ver.
Date
History
Contents
S.M. Rev.
issued
1.0
2010.01
Official Release
—
—
1.1
2010.10
Revised-1
(A1 10-164)
(A1 10-164)
Replacement of the previously issued SERVICE MANUAL
9-852-734-51.
• Change of Adjust manual.
Version of Adjust manual has been changed from Ver_1.0r01 to
9-852-734-51.
• Change of Adjust manual.
Version of Adjust manual has been changed from Ver_1.0r01 to
Ver_1.1r02.
• Modification of Destination data write.
Addition of adjustment procedure.
Addition of adjustment procedure.
Yes*
2.0
2011.09
Revised-2
(A2 11-086)
(A2 11-086)
Replacement of the previously issued SERVICE MANUAL
9-852-734-52.
• Change of Adjust manual.
Version of Adjust manual has been changed from Ver_1.1 to
9-852-734-52.
• Change of Adjust manual.
Version of Adjust manual has been changed from Ver_1.1 to
Ver_2.0.
Available for Windows Vista and Windows 7.
• Modification of Installer specification.
• Modification of Installer specification.
Yes*
3.0
2015.03
Revised-3
(A3 14-206)
(A3 14-206)
Replacement of the previously issued SERVICE MANUAL
9-852-734-53.
• Change of Adjust manual.
Version of Adjust manual has been changed from Ver_2.0 to
9-852-734-53.
• Change of Adjust manual.
Version of Adjust manual has been changed from Ver_2.0 to
Ver_3.0.
• Modification of HASP Key authentication.
• Change of file name.
• Change of file name.
Yes*
Display
