Sony DCR-SR37E / DCR-SR38E / DCR-SR47 / DCR-SR47E / DCR-SR48 / DCR-SR48E / DCR-SR57E / DCR-SR67 / DCR-SR67E Service Manual ▷ View online
Revision History
Revision History
Sony Corporation
SERVICE MANUAL
LEVEL
3
Link
Link
MODEL INFORMATION TABLE
PRINTED WIRING BOARDS
SCHEMATIC DIAGRAMS
REPAIR PARTS LIST
DCR-SR37E/SR38E/SR47/SR47E/
SR48/SR48E/SR57E/SR67/SR67E_L3
SR48/SR48E/SR57E/SR67/SR67E_L3
Photo: DCR-SR47
Ver. 1.3 2011.10
2011J08-1
© 2011.10
Published by Sony Techno Create Corporation
The components identified by
mark 0 or dotted line with
mark 0 are critical for safety.
Replace only with part num-
ber specified.
mark 0 or dotted line with
mark 0 are critical for safety.
Replace only with part num-
ber specified.
Les composants identifiés par une
marque 0 sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
marque 0 sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
DIGITAL VIDEO CAMERA RECORDER
DCR-SR37E/SR38E/SR47/SR47E/SR48
SR48E/SR57E/SR67/SR67E
US Model
Canadian Model
AEP Model
UK Model
North European Model
E Model
Australian Model
Hong Kong Model
Chinese Model
Korea Model
Argentine Model
Brazilian Model
9-852-638-14
DCR-SR37E/SR38E/SR47/SR47E/
SR48/SR48E/SR57E/SR67/SR67E_L3
SR48/SR48E/SR57E/SR67/SR67E_L3
Model information table
• Abbreviation
AR : Argentine model
AUS : Australian model
BR
AUS : Australian model
BR
: Brazilian model
CH : Chinese model
CND : Canadian model
HK : Hong Kong model
KR : Korea model
NE
CND : Canadian model
HK : Hong Kong model
KR : Korea model
NE
: North European model
Model
DCR-SR37E
PAL
Color system
CAM
PC
Data
copy
copy
Destination
CONTROL SWITCH
BLOCK (SB30300)
BLOCK (SB30300)
AEP, UK
CAM
PC
DCR-SR38E
PAL
AEP, UK
DCR-SR47
NTSC
US, CND, AR,
KR, BR, E
DCR-SR47E
PAL
NE, HK, AUS,
CH, E
DCR-SR48
NTSC
60 GB
HDD
70 GB
60 GB
60 GB
70 GB
CND
DCR-SR48E
PAL
70 GB
NE
Recording sound
format
format
2ch STEREO
2ch STEREO
2ch STEREO
2ch STEREO
2ch STEREO
2ch STEREO
Model
DCR-SR57E
PAL
Color system
CAM
PC
Data
copy
copy
Destination
CONTROL SWITCH
BLOCK (SB30300)
BLOCK (SB30300)
AEP, UK
CAM
PC
DCR-SR67
NTSC
US, CND, KR, E
DCR-SR67E
PAL
NE, AUS, E
80 GB
HDD
80 GB
80 GB
5.1ch SURROUND
5.1ch SURROUND
5.1ch SURROUND
Recording sound
format
format
— 4 —
DCR-SR37E/SR38E/SR47/SR47E/
SR48/SR48E/SR57E/SR67/SR67E_L3
SR48/SR48E/SR57E/SR67/SR67E_L3
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED LINE WITH
MARK
0
ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE
0
SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40
• Unleaded solder melts at a temperature about 40
°C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
°C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
also be added to ordinary solder.
— 5 —
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Dispose of used batteries according to the instructions.
Replace only with the same or equivalent type.
Dispose of used batteries according to the instructions.
4-2. SCHEMATIC DIAGRAMS
DCR-SR37E/SR38E/SR47/SR47E/
SR48/SR48E/SR57E/SR67/SR67E_L3
SR48/SR48E/SR57E/SR67/SR67E_L3
Link
Link
VC-554 BOARD (1/11)
(CONNECTOR)
(CONNECTOR)
VC-554 BOARD (10/11)
(SDRAM, OneNAND FLASH)
(SDRAM, OneNAND FLASH)
VC-554 BOARD (2/11)
(A/D CONVERTER, TIMING GENERATOR)
(A/D CONVERTER, TIMING GENERATOR)
VC-554 BOARD (11/11)
(MOBILE DDR SDRAM)
(MOBILE DDR SDRAM)
VC-554 BOARD (3/11)
(G SENSOR)
(G SENSOR)
DA-044 BOARD (1/6)
(CONNECTOR)
(CONNECTOR)
VC-554 BOARD (4/11)
(LENS DRIVE, EVR)
(LENS DRIVE, EVR)
DA-044 BOARD (2/6) (VIDEO OUT, AUDIO I/O)
: SR57E/SR67/SR67E
: SR57E/SR67/SR67E
VC-554 BOARD (5/11)
(LENS DRIVE)
(LENS DRIVE)
DA-044 BOARD (3/6) (VIDEO OUT, AUDIO I/O)
: SR37E/SR38E/SR47/SR47E/SR48/SR48E
: SR37E/SR38E/SR47/SR47E/SR48/SR48E
VC-554 BOARD (6/11)
(FOCUS/ZOOM MOTOR DRIVE)
(FOCUS/ZOOM MOTOR DRIVE)
DA-044 BOARD (4/6)
(FUSE)
(FUSE)
VC-554 BOARD (7/11)
(CPU (CAMERA SIGNAL PROCESS, CAMERA CONTROL) 1)
DA-044 BOARD (5/6)
(DC CONTROL)
(DC CONTROL)
VC-554 BOARD (8/11)
(CPU (CAMERA SIGNAL PROCESS, CAMERA CONTROL) 2)
VC-554 BOARD (9/11)
(CPU (CAMERA SIGNAL PROCESS, CAMERA CONTROL) 3)
DA-044 BOARD (6/6)
(HI CONTROL)
(HI CONTROL)
COMMON NOTE FOR SCHEMATIC DIAGRAMS
