DOWNLOAD Sony DCR-SR190E / DCR-SR200 / DCR-SR200C / DCR-SR200E / DCR-SR290E / DCR-SR300 / DCR-SR300C / DCR-SR300E (serv.man3) Service Manual ↓ Size: 436.31 KB | Pages: 10 in PDF or view online for FREE

— 5 —

DCR-SR190E/SR200/SR200C/SR200E/SR290E/SR300/SR300C/SR300E_L1

COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.

LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.

1.

Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.

2.

Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.

3.

Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.

4.

Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.

5.

Check the B+ voltage to see it is at the values specified.

6.

Flexible Circuit Board Repairing

• Keep the temperature of the soldering iron around 270°C

during repairing.

• Do not touch the soldering iron on the same conductor of the

circuit board (within 3 times).

• Be careful not to apply force on the conductor when soldering

or unsoldering.

After correcting the original service problem, perform the following

safety checks before releasing the set to the customer.

— 6 —

DCR-SR190E/SR200/SR200C/SR200E/SR290E/SR300/SR300C/SR300E_L1

1 1

3 1

C

Repaired by:

Refer to “3. Self-diagnosis Code Table”.

Indicates the appropriate
step to be taken.
E.g.
31 ....Reload the tape.
32 ....Turn on power again.

Block

Detailed Code

Blinks at 3.2Hz

C : Corrected by customer
H : Corrected by dealer
E : Corrected by service

engineer

LCD screen

C : 3 1 : 1 1

When problems occur while the unit is operating, the self-diagnosis
function starts working, and displays on the LCD screen what to
do. This function consists of two display; self-diagnosis display and
service mode display.
Details of the self-diagnosis functions are provided in the Instruction
manual.

When problems occur while the unit is operating, the counter of the
LCD screen shows a 4-digit display consisting of an alphabet and
numbers, which blinks at 3.2 Hz. This 5-character display indicates
the “repaired by:”, “block” in which the problem occurred, and
“detailed code” of the problem.

— 7 —

DCR-SR190E/SR200/SR200C/SR200E/SR290E/SR300/SR300C/SR300E_L1

C

C

C

C

Block

Function

0

4

1

3

1

3

3

2

Detailed

Code

0

0

0

1

0

2

6

0

Symptom/State

Non-standard battery is used.

Memory Stick Duo is unformatted.
Memory Stick Duo is broken.

Disc access error

Difficult to adjust focus
(Cannot initialize focus)

Self-diagnosis Code

Repaired b

y:

Correction

Use the InfoLITHIUM battery.

Format the Memory Stick Duo.
Insert a new Memory Stick Duo.

Remove the power source. Reconnect it again and operate your
camcorder again

Retry turn the power on by the power switch. If it does not
recover, check the focus reset sensor of lens block. If it is OK,
check the focus motor drive IC.

— 8 —

DCR-SR190E/SR200/SR200C/SR200E/SR290E/SR300/SR300C/SR300E_L1

• Refer to the cover for mark 0.

Power cord
0 1-823-945-41 (US, CND)
0 1-823-947-71 (KR)
0 1-827-826-41 (AEP, E: PAL)
0 1-827-945-61 (AUS)
0 1-828-050-31 (JE)
0 1-830-518-41 (E: NTSC)
0 1-832-121-31 (CH)
0 1-832-169-31 (UK, HK)

AC Adaptor
(AC-L200/L200B)
0 1-479-285-21

Handycam Station
(DCRA-C171)
  1-820-945-21

A/V connecting cable
  1-831-553-11 

USB cable
 1-829-579-41 

Wireless Remote Commander
(RMT-835)
  1-479-275-41

Rechargeable battery pack
(NP-FH60)
0 A-1201-666-A (US, CND)
0 A-1201-667-A (EXCEPT US, CND, CH)
0 A-1201-668-A (CH)

Conversion (2P) Adaptor
0 1-569-007-12 (E: NTSC, JE)

Conversion (2P) Adaptor
0 1-569-008-12 (HK)

21-Pin Adaptor
  1-770-783-21 (AEP, UK)

Operating Guide
(DCR-SR200/SR200C/SR300/SR300C)
   3-098-548-11 (ENGLISH) (US, CND, E: NTSC, JE)
   3-098-548-21 (FRENCH) (CND)
   3-098-548-31 (SPANISH) (US, E: NTSC, JE)
   3-098-548-41 (PORTUGUESE) (JE)
   3-098-548-51 (TRADITIONAL CHINESE) (E: NTSC)
   3-098-548-61 (KOREAN) (KR, JE)
(DCR-SR190E/SR200E/SR290E/SR300E)
   3-098-549-12 (ENGLISH) (AEP, UK, HK, AUS, E: PAL, JE)
   3-098-549-21 (FRENCH, DUTCH) (AEP)
   3-098-549-31 (GERMAN, ITALIAN, TURKISH) (AEP)
   3-098-549-41 (SPANISH, PORTUGUESE, GREEK) (AEP)
   3-098-549-51 (RUSSIAN, SWEDISH) (AEP, JE)
   3-098-549-61 (DANISH, FINNISH, POLISH) (AEP)
   3-098-549-71 (CZECH, HUNGARIAN, SLOVAK) (AEP)
   3-098-549-81 (SIMPLIFIED CHINESE) (CH, E: PAL, JE)
   3-098-550-31 (TRADITIONAL CHINESE) (HK)
   3-098-550-41 (ARABIC, PERSIAN) (E: PAL)

 

 

DVD-ROM
(ENJOY HANDYCAM)
  3-093-691-01 ENGLISH, KOREAN, JAPANESE (KR) 
  3-093-691-11 ENGLISH, FRENCH, SPANISH, PORTUGUESE (US, CND, E)
  3-093-691-21 ENGLISH, RUSSIAN, GERMAN (UK)
  3-093-691-51 ENGLISH, FRENCH, GERMAN, DUTCH, PORTUGUESE, ITALIAN, RUSSIAN (AEP)
  3-093-691-61 ENGLISH, FRENCH, SIMPLIFIED CHINESE, TRADITIONAL CHINESE (HK, AUS, CH, E: PAL)
  3-093-691-71 ENGLISH, TRADITIONAL CHINESE, SPANISH, PORTUGUESE (E: NTSC)