Sony DCR-PC4E / DCR-PC5E Service Manual ▷ View online
— 13 —
2-5.
ATTACHING HARNESSES OF THE LCD HINGE ASSEMBLY
Harness
(PD-109) (14P)
(PD-109) (14P)
Harness
(PR-062) (8P) (2P)
(PR-062) (8P) (2P)
Harness
(PD-109) (14P)
(PD-109) (14P)
Bend one of the two
harnesses at its connector.
harnesses at its connector.
Harness
(PR-062) (8P) (2P)
(PR-062) (8P) (2P)
PO-5 board
Install the PO-5 board in
the direction of the arrow.
the direction of the arrow.
PR-35 board
LCD hinge assembly
LCD hinge assembly
LCD hinge assembly
LCD hinge assembly
Route the harnesses (PR-062) (8P) (2P)
and (PD-109) (14P) through the hole of the
LCD hinge assembly as shown.
and (PD-109) (14P) through the hole of the
LCD hinge assembly as shown.
2
3
1
4
5
7
6
(8P)
(14P)
Two claws
Screw (M1.7
×
2.5),
lock ace, p2
5
Screw (M1.7
×
2.5),
lock ace, p2
Hinge cover (rear)
2
Two claws
3
Close hinge cover (rear)
in the direction of the arrow.
Hinge cover (front)
PO-5 board
PR-35 board
Solder at the
two positions.
two positions.
Solder at the
two positions.
two positions.
Harness
(PR-062) (8P) (2P)
(PR-062) (8P) (2P)
A
B
D
C
C
D
5
6
7
8
CN006
Gnd
Gnd
KEY-A02
KEY-A03
A
B
C
D
B
A
Hinge cover (front)
Hinge cover (rear)
1
Hinge cover (front)
4
Hinge
cover (rear)
Attach the PR-35 board to the
LCD hinge assembly with the
both-sided adhesive tape.
LCD hinge assembly with the
both-sided adhesive tape.
Blind plate assembly
Blind plate assembly
Claw
LCD hinge
assembly
assembly
8
3
Two screws (M1.7
×
2.5),
lock ace, p2
1
Close Blind plate in the
direction of the arrow.
Harness (PR-062) (8P) (2P),
Harness (PD-109) (14P)
Harness (PD-109) (14P)
2
When attaching the blind plate assembly, route the
harnesses through the notch as shown while taking
care so that the harness must not be caught or pinched.
care so that the harness must not be caught or pinched.
Blind plate
assembly
assembly
— 14 —
2-6.
LENS-EVF BLOCK ASSEMBLY
2-7.
MICROPHONE BLOCK, SPEAKER
VC-245
Board
4
Lens-EVF block assembly
1
CF-75 board (88P)
2
NS-12 board (8P)
3
Screw (M1.7
×
2.5),
lock ace, p2
PRECAUTION DURING INSTALLATION
When installing, align the groove
A
of the
lens-
EVF
block assembly and the portion
B
of the cabinet (L) assembly as shown.
B
A
B
VC-245
Board
2
1
Remove the
two solderings
3
Speaker
REMOVING THE SPEAKER
3
Microphone block
2
Speaker retainer assembly
1
Two screws (M1.7
×
2.5),
lock ace, p2
— 15 —
2-8.
VC-245 BOARD
2-9.
MECHANISM DECK
8
VC-245
board
1
Three screws (M1.7
×
2.5),
lock ace, p2
3
Control switch block
(FK-3035
0
) (39P)
7
Flexible board (from drum motor) (10P)
6
Flexible board (from video head) (10P)
5
FP-102 flexible board (27P)
4
Flexible board (from capstan motor) (27P)
VC-245
Board
Board
VC-245
Board
Board
Two claws
VC-245 board
2
Remove the VC-245 board
in the direction of the arrow.
REMOVING THE VC-245 BOARD
5
Remove the mechanism deck, Cassette compartment
cover in the direction of the arrow
B
.
(Be careful not to damage the mechanism deck´s flexible.)
2
Cassette
compartment cover
3
Mechanism deck
1
Two screws
(M1.4
×
1.5)
4
Two dowels
2
Two screws
(M1.4
×
1.5)
1
Two screws (M1.7
×
2.5),
lock ace, p2
3
Open the cabinet (G) assembly,
MD frame assembly in the
direction of the arrow
direction of the arrow
A
.
REMOVING THE CASSETTE
COMPARTMENT COVER
COMPARTMENT COVER
A
B
— 16 —
2-10. CF-75 BOARD, LENS DEVICE (LSV-651B)
A
REMOVING THE VF LENS ASSEMBLY
3
VF lens assembly
4
VF regulation
ring assembly
5
VF
sleeve
1
Screw (M1.7
×
3),
lock ace, p2
2
Screw (M1.7
×
3),
lock ace, p2
2
Screw (M1.7
×
2.5),
lock ace, p2
4
Tapping screw
(M1.7
×
4), p2
3
Screw (M1.7
×
2.5),
lock ace, p2
1
5
VF sleeve guide assembly
4
LCD
cushion
2
BL cushion (B), BL unit, BL cushion (L),
Light guide plate block, CF-75 Board
3
LCD (LCX032AK-J) (PC4E) (16P)
LCD (LCX033AK-J) (PC5E) (16P)
1
Two claws
9
CF-75 Board
8
Two screws (M1.7
×
2.5),
lock ace, p2
5
BL cushion (B)
6
BL cushion (L)
7
BL unit
4
Light guide
plate block (6P)
3
Light guide plate block
Remove by sliding in the
direction of the arrow
direction of the arrow
A
.
1
Two claws
2
claw
Note: Be careful that dust must not enter during re-assembly.
Click on the first or last page to see other DCR-PC4E / DCR-PC5E service manuals if exist.