Sony DCR-IP210 / DCR-IP210E / DCR-IP220 / DCR-IP220E (serv.man4) Service Manual ▷ View online
SECTION 6
ADJUSTMENTS
ADJ
Revision History
Revision History
Ver 1.1 2003. 05
Link
Link
Adjusting items when replacing main parts and boards
Before starting adjustment
Adjusting items when replacing main parts and boards
Before starting adjustment
LCD SYSTEM ADJUSTMENT
CAMERA SYSTEM ADJUSTMENTS
PREPARATIONS BEFORE ADJUSTMENT
CAMERA SECTION ADJUSTMENT
INITIALIZATION OF 4, 8, 9, A, B, C, D, E, F, 1B, 1E, 1F PAGE DATA
COLOR ELECTRONIC VIEWFINDER SYSTEM ADJUSTMENT
LCD SYSTEM ADJUSTMENT
COLOR ELECTRONIC VIEWFINDER SYSTEM ADJUSTMENT
CAMERA SYSTEM ADJUSTMENTS
INITIALIZATION OF 4, 8, 9, A, B, C, D, E, F, 1B, 1E, 1F PAGE DATA
PREPARATIONS BEFORE ADJUSTMENT
CAMERA SECTION ADJUSTMENT
TAPE PATH ADJUSTMENT
MECHANISM SECTION ADJUSTMENT
OPERATING WITHOUT CASSETTE
Adjustment Remote Commander
TAPE PATH ADJUSTMENT
OPERATING WITHOUT CASSETTE
Adjustment Remote Commander
MECHANISM SECTION ADJUSTMENT
AUDIO SYSTEM ADJUSTMENTS
VIDEO SYSTEM ADJUSTMENTS
SERVO AND RF SYSTEM ADJUSTMENT
SYSTEM CONTROL SYSTEM ADJUSTMENT
PREPARATIONS BEFORE ADJUSTMENTS
VIDEO SECTION ADJUSTMENT
AUDIO SYSTEM ADJUSTMENTS
VIDEO SYSTEM ADJUSTMENTS
SERVO AND RF SYSTEM ADJUSTMENT
SYSTEM CONTROL SYSTEM ADJUSTMENT
PREPARATIONS BEFORE ADJUSTMENTS
VIDEO SECTION ADJUSTMENT
SERVICE MODE
DATA PROCESS
ADJUSTMENT REMOTE COMMANDER
SERVICE MODE
SERVICE MODE
DATA PROCESS
ADJUSTMENT REMOTE COMMANDER
SERVICE MODE
Sony EMCS Co.
2002I1600-1
©2002.9
Published by DI Customer Center
9-929-995-51
Contents of LEVEL 2 and LEVEL 3 Service Manual
CONTENTS
1. SERVICE NOTE
2. DISASSEMBLY
3. BLOCK DIAGRAMS
2. DISASSEMBLY
3. BLOCK DIAGRAMS
4. PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
5. REPAIR PARTS LIST
LEVEL 2
a
a
OVERALL
POWER
BT-012, AN-025, LD-112,
ST-076, JK-234, SW-380,
PK-067, PD-166, VF-155,
DC-098 BOARD,
FLASH UNIT (FL-2980),
CONTROL SWITCH BLOCK
(SS-2980, PW-2980),
FP-538, FP-539, FP-554,
FP-540, FP-541, FP-542
FLEXIBLE
EXPLODED VIEWS
ELECTRICAL PARTS
POWER
BT-012, AN-025, LD-112,
ST-076, JK-234, SW-380,
PK-067, PD-166, VF-155,
DC-098 BOARD,
FLASH UNIT (FL-2980),
CONTROL SWITCH BLOCK
(SS-2980, PW-2980),
FP-538, FP-539, FP-554,
FP-540, FP-541, FP-542
FLEXIBLE
EXPLODED VIEWS
ELECTRICAL PARTS
LEVEL 3
✕
✕
✕
✕
✕
CD-406, DI-087, VC-308 BOARD
✕
a
(CD-406, DI-087, VC-308 BOARD)
DCR-IP210/IP210E/
IP220/IP220E
RMT-817
— 2 —
DCR-IP210/IP210E/IP220/IP220E
TABLE OF CONTENTS
6.
ADJUSTMENT
1.
Before starting adjustment ··············································· 6-1
1-1.
Adjusting items when replacing main parts and boards. · 6-2
6-1.
CAMERA SECTION ADJUSTMENT ··························· 6-4
1-1.
PREPARATIONS BEFORE ADJUSTMENT
(CAMERA SECTION) ··················································· 6-4
(CAMERA SECTION) ··················································· 6-4
1-1-1. List of Service Tools ························································ 6-4
1-1-2. Preparations ····································································· 6-6
1-1-3. Precaution ········································································ 6-8
1.
1-1-2. Preparations ····································································· 6-6
1-1-3. Precaution ········································································ 6-8
1.
Setting the Switch ···························································· 6-8
2.
Order of Adjustments ······················································ 6-8
3.
Subjects ··········································································· 6-8
4.
Preparing the Flash Adjustment Box ······························· 6-9
1-2.
INITIALIZATION OF 4, 8, 9, A, B, C, D, E, F,
1B, 1E, 1F PAGE DATA ················································ 6-10
1B, 1E, 1F PAGE DATA ················································ 6-10
1-2-1. INITIALIZATION OF A, D PAGE DATA ···················· 6-10
1.
1.
Initializing the A, D Page Data ······································ 6-10
2.
Modification of A, D Page Data ···································· 6-10
3.
A Page Table ·································································· 6-11
4.
D Page Table ·································································· 6-11
1-2-2. INITIALIZATION OF B, 1B PAGE DATA ·················· 6-12
1.
1.
Initializing the B, 1B Page Data ···································· 6-12
2.
Modification of B, 1B Page Data ·································· 6-12
3.
Initialization of Bluetooth Unit (DCR-IP220/IP220E) · 6-12
4.
Writing the Network Default Setting Value
(DCR-IP220/IP220E) ···················································· 6-13
(DCR-IP220/IP220E) ···················································· 6-13
5.
B Page Table ·································································· 6-13
6.
1B Page Table ································································ 6-13
1-2-3. INITIALIZATION OF E, F, 1E, 1F PAGE DATA ········ 6-14
1.
1.
Initializing the E, F, 1E, 1F Page Data ·························· 6-14
2.
Modification of E, F, 1E, 1F Page Data ························· 6-14
3.
E Page Table ·································································· 6-15
4.
F Page Table ·································································· 6-16
5.
1E Page Table ································································ 6-18
6.
1F Page Table ································································ 6-18
1-2-4. INITIALIZATION OF 4, 8, 9, C PAGE DATA ············· 6-19
1.
1.
Initializing the 4, 8, 9, C Page Data ······························· 6-19
2.
Modification of 4, 8, 9, C Page Data ····························· 6-19
3.
4 Page Table ··································································· 6-19
4.
8 Page Table ··································································· 6-20
5.
9 Page Table ··································································· 6-20
6.
C Page Table ·································································· 6-20
1-3.
CAMERA SYSTEM ADJUSTMENTS ························ 6-22
1.
67.5MHz/54MHz Origin Oscillation Adjustment
(CD-406 board) ····························································· 6-22
(CD-406 board) ····························································· 6-22
2.
Zoom Key Center Adjustment ······································· 6-22
3.
HALL Adjustment ························································· 6-23
4.
CCD Output 2ch Matching Adjustment (1) ·················· 6-23
5.
CCD Output 2ch Matching Adjustment (2) ·················· 6-24
6.
MR Adjustment ····························································· 6-24
7.
Flange Back Adjustment (Using Minipattern Box) ······· 6-25
8.
Flange Back Adjustment (Using Flange Back Adjustment
Chart and Subject More Than 500m Away) ·················· 6-26
Chart and Subject More Than 500m Away) ·················· 6-26
8-1.
Flange Back Adjustment (1) ·········································· 6-26
8-2.
Flange Back Adjustment (2) ·········································· 6-27
9.
Flange Back Check ························································ 6-27
10.
MAX GAIN Adjustment ··············································· 6-28
11.
Picture Frame Setting ···················································· 6-28
12.
Color Reproduction Adjustment ···································· 6-29
13.
Auto White Balance & LV Standard Data Input ··········· 6-30
14.
Auto White Balance Adjustment ··································· 6-31
15.
White Balance Check ···················································· 6-32
16.
Mechanical Shutter Adjustment ···································· 6-33
17.
Strobe Light Level Adjustment ····································· 6-33
18.
Strobe White Balance Adjustment & Check ················· 6-34
19.
AF Laser Output Adjustment ········································ 6-34
20.
AF Laser Axis Check ···················································· 6-35
21.
Steady Shot Check ························································· 6-36
1-4.
COLOR ELECTRONIC VIEWFINDER SYSTEM
ADJUSTMENT ····························································· 6-37
ADJUSTMENT ····························································· 6-37
1.
Back Light Adjustment (DI-087 board) ························ 6-38
1-1.
Automatic Adjustment ··················································· 6-38
1-2.
Manual Adjustment ······················································· 6-38
2.
Bright Adjustment (DI-087 board) ································ 6-39
2-1.
Automatic Adjustment ··················································· 6-39
2-2.
Manual Adjustment ······················································· 6-39
3.
Contrast Adjustment (DI-087 board) ····························· 6-40
3-1.
Automatic Adjustment ··················································· 6-40
3-2.
Manual Adjustment ······················································· 6-40
4.
White Balance Adjustment (DI-087 Board) ·················· 6-41
5.
VCO Check (DI-087 Board) ········································· 6-41
1-5.
LCD SYSTEM ADJUSTMENT ··································· 6-43
1.
VCO Adjustment (PD-166 Board) ································ 6-43
2.
Bright Adjustment (PD-166 Board) ······························ 6-44
3.
Black Limit Adjustment (PD-166 Board) ····················· 6-44
4.
PSIG GRAY Adjustment (PD-166 Board) ···················· 6-45
5.
Contrast Adjustment (PD-166 Board) ··························· 6-45
6.
Center Level Adjustment (PD-166 Board) ···················· 6-46
7.
V-COM Adjustment (PD-166 Board) ···························· 6-46
8.
White Balance Adjustment (PD-166 Board) ················· 6-47
6-2.
MECHANISM SECTION ADJUSTMENT ·················· 6-48
2-1.
Adjustment Remote Commander ·································· 6-48
2-2.
OPERATING WITHOUT CASSETTE ························ 6-48
2-3.
TAPE PATH ADJUSTMENT ········································ 6-48
1.
Preparation for Adjustment ··········································· 6-48
2.
Processing after Completing Operations: ······················ 6-48
6-3.
VIDEO SECTION ADJUSTMENT ······························ 6-49
3-1.
PREPARATIONS BEFORE ADJUSTMENTS ············ 6-49
3-1-1. Equipment to Required ·················································· 6-49
3-1-2. Precautions on Adjusting ··············································· 6-50
3-1-3. Adjusting Connectors ···················································· 6-51
3-1-4. Connecting the Equipment ············································ 6-51
3-1-5. Alignment Tapes ···························································· 6-52
3-1-6. Input/Output Level and Impedance ······························· 6-52
3-2.
3-1-2. Precautions on Adjusting ··············································· 6-50
3-1-3. Adjusting Connectors ···················································· 6-51
3-1-4. Connecting the Equipment ············································ 6-51
3-1-5. Alignment Tapes ···························································· 6-52
3-1-6. Input/Output Level and Impedance ······························· 6-52
3-2.
SYSTEM CONTROL SYSTEM ADJUSTMENT ········ 6-53
1.
Initialization of 4, 8, 9, A, B, C, D, E, F, 1B, 1E, 1F
Page Data ······································································· 6-53
Page Data ······································································· 6-53
2.
Touch Panel Adjustment ················································ 6-53
3.
Serial No. Input ····························································· 6-53
3-3.
SERVO AND RF SYSTEM ADJUSTMENT ··············· 6-55
1.
Cap FG Duty Adjustment (VC-308 Board) ··················· 6-55
2.
Treel FG Duty Adjustment (VC-308 Board) ················· 6-56
3.
Read Clock fo Adjustment (VC-308 Board) ················· 6-56
4.
Switching Position Adjustment (VC-308 Board) ·········· 6-57
5.
XREC ACT Adjustment (VC-308 Board) ····················· 6-57
6.
Timing ATF Center Value Adjustment (VC-308 Board) ·· 6-58
7.
AGC Adjustment and AEQ & LMS Adjustment ··········· 6-58
7-1.
Preparations Before Adjustments ·································· 6-58
7-2.
AGC Adjustment (VC-308 Board) ································ 6-59
7-3.
Pch AEQ & LMS Adjustment (VC-308 Board) ············ 6-59
7-4.
Mch AEQ & LMS Adjustment (VC-308 Board) ··········· 6-60
8.
Error Rate Check (VC-308 Board) ································ 6-60
3-4.
VIDEO SYSTEM ADJUSTMENTS ····························· 6-61
1.
Chroma BPF f
0
Adjustment (VC-308 Board) ················ 6-61
2.
S VIDEO OUT Y Level Adjustment (VC-308 Board) ···· 6-61
3.
S VIDEO OUT Chroma Level Adjustment
(VC-308 Board) ····························································· 6-62
(VC-308 Board) ····························································· 6-62
4.
VIDEO OUT Y, Chroma Level Check (VC-308 Board) · 6-62
3-5.
AUDIO SYSTEM ADJUSTMENTS ···························· 6-63
1.
Overall Level Characteristics Check ····························· 6-64
2.
Overall Distortion Check ··············································· 6-64
3.
Overall Noise Level Check ············································ 6-64
— 3 —
DCR-IP210/IP210E/IP220/IP220E
6-4.
SERVICE MODE ·························································· 6-65
4-1.
ADJUSTMENT REMOTE COMMANDER ················ 6-65
1.
Using the adjustment remote commander ····················· 6-65
2.
Precautions upon using the adjustment remote
commander ···································································· 6-65
commander ···································································· 6-65
4-2.
DATA PROCESS ··························································· 6-66
4-3.
SERVICE MODE ·························································· 6-67
1.
Setting the Test Mode ···················································· 6-67
2.
Emergence Memory Address ········································ 6-67
2-1.
EMG Code (Emergency Code) ····································· 6-67
2-2.
MSW Code ···································································· 6-68
3.
Bit value discrimination ················································ 6-69
4.
Switch check (1) ···························································· 6-69
5.
Switch check (2) ···························································· 6-69
6.
Switch check (3) ···························································· 6-69
7.
Switch check (4) ···························································· 6-69
8.
Record of Use check (1) ················································ 6-71
9.
Record of Use check (2) ················································ 6-71
10.
Record of Self-diagnosis check ····································· 6-72
*
Color reproduction frame is shown on page 6-73.
6-1
DCR-IP210/IP210E/IP220/IP220E
SECTION 6
ADJUSTMENTS
COVER
COVER
1.
Before starting adjustment
EVR Data Re-writing Procedure When Replacing Board
The data that is stored in the repair board, is not necessarily correct.
Perform either procedure 1 or procedure 2 or procedure 3 when replacing board.
Perform either procedure 1 or procedure 2 or procedure 3 when replacing board.
Procedure 1
Save the EVR data of the machine in which a board is going to be replaced. Download the saved data after a board
is replaced.
is replaced.
Remove the EEPROM and install it.
(Former board)
(New board)
(Machine to be repaired)
(Machine to be repaired)
(The same model of the same destination)
Save the data.
Download the data.
PC
Procedure 2
Remove the EEPROM from the board of the machine that is going to be repaired. Install the removed EEPROM
to the replaced board.
to the replaced board.
Procedure 3
When the data cannot be saved due to defective EEPROM, or when the EEPROM cannot be removed or
installed, save the data from the same model of the same destination, and download it.
installed, save the data from the same model of the same destination, and download it.
After the EVR data is saved and downloaded, check the
respective items of the EVR data.
(Refer to page 6-3 for the items to be checked.)
respective items of the EVR data.
(Refer to page 6-3 for the items to be checked.)
(Machine before starting repair)
(Machine after a board is replaced)
PC
PC
Save the EVR data
to a personal computer.
to a personal computer.
Download the saved
data to a machine.
data to a machine.
