DOWNLOAD Sony DCR-HC90 / DCR-HC90E (serv.man3) Service Manual ↓ Size: 457.96 KB | Pages: 6 in PDF or view online for FREE

Model
DCR-HC90 DCR-HC90E (serv.man3)
Pages
6
Size
457.96 KB
Type
PDF
Document
Service Manual
Brand
Device
Movie / LEVEL 1
File
dcr-hc90-dcr-hc90e-sm3.pdf
Date

Sony DCR-HC90 / DCR-HC90E (serv.man3) Service Manual ▷ View online

— 3 —
DCR-HC90/HC90E
1.
Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH
MARK 
0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CAUTION :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
4.
Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
— 4 —
DCR-HC90/HC90E
Checking supplied accessories.
   Other accessories
2-548-307-11 MANUAL, INSTRUCTION (ENGLISH)(HC90:US,CND,E,JE)
2-548-307-21 MANUAL, INSTRUCTION (FRENCH)(HC90:CND)
2-548-307-31 MANUAL, INSTRUCTION (SPANISH)(HC90:E,JE)
2-548-307-41 MANUAL, INSTRUCTION (PORTUGUESE)(HC90:E,JE)
2-548-307-51 MANUAL, INSTRUCTION (TRADITIONAL CHINESE)
(HC90:E)
2-548-307-61 MANUAL, INSTRUCTION (KOREAN)(HC90:KR,JE)
2-548-308-11 MANUAL, INSTRUCTION (ENGLISH)
(HC90E:AEP,UK,E,AUS,HK,JE)
2-548-308-21 MANUAL, INSTRUCTION (FRENCH)(HC90E:AEP,E)
2-548-308-31 MANUAL, INSTRUCTION (SPANISH/PORTUGUESE)
(HC90E:AEP)
2-548-308-41 MANUAL, INSTRUCTION (ITALIAN/GREEK)(HC90E:AEP)
Make sure that the following accessories are supplied with your camcorder.
Note :
The components identified by
mark 0 or dotted line with mark
0 are critical for safety.
Replace only with part number
specified.
Note :
Les composants identifiés par
une marque 0 sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce portant le numéro spécifié.
AC Adaptor (1)
0
1-479-047-11
Power cord (Main lead) (1)
(US, CND model)
0
1-790-107-41
Power cord (Main lead) (1)
(AEP, E, NE model)
0
1-769-608-31
Power cord (Main lead) (1)
(UK, HK model)
0
1-783-374-12
Power cord (Main lead) (1)
(KR model)
0
1-776-985-11
Power cord (Main lead) (1)
(AUS model)
0
1-827-945-12
Power cord (Main lead) (1)
(JE model)
0
1-790-732-71
Power cord (Main lead) (1)
(CH model)
0
1-782-476-51
2-548-308-51 MANUAL, INSTRUCTION (GERMAN/DUTCH)(HC90E:AEP)
2-548-308-61 MANUAL, INSTRUCTION (SWEDISH/RUSSIAN)
(HC90E:JE,NE)
2-548-308-71 MANUAL, INSTRUCTION (DANISH/FINNISH)(HC90E:NE)
2-548-308-81 MANUAL, INSTRUCTION (ARABIC/PERSIAN)(HC90E:E)
2-548-308-91 MANUAL, INSTRUCTION (TRADITIONAL CHINESE)
(HC90E:HK)
2-582-532-11 MANUAL, INSTRUCTION (SIMPLIEIED CHINESE)
(HC90E:E,JE,CH)
Lid Battery Case
3-083-973-01
Wireless Remote Commander
(RMT-831) (1)
1-477-898-41
A/V connecting cable (1)
1-823-156-51
USB cable (1)
1-829-868-31
Shoulder strap (1)
2-176-235-01
CD-ROM “Picture Package Ver. 1.5”
(SPVD-012 2005) (1)
2-515-350-01
2-pin conversion adaptor (1)
(JE model)
1-569-007-12
2-pin conversion adaptor (1)
(E, HK model)
1-569-008-21
Rechargeable battery pack
(NP-FA50) (1)
(not supplied)
“Memory Stick Duo”
(16MB) (1)
(not supplied)
Memory Stick Duo
adaptor (1)
(not supplied)
• Abbreviation
CND : Canadian model
AUS : Australian model
NE
: North European model
CH
: Chinese model
HK
: Hong Kong model
KR
: Korea model
JE
: Tourist model
— 5 —
DCR-HC90/HC90E
SELF-DIAGNOSIS FUNCTION
1.
SELF-DIAGNOSIS FUNCTION
When problems occur while the unit is operating, the self-diagnosis
function starts working, and displays on the viewfinder, or LCD
screen what to do.
Details of the self-diagnosis functions are provided in the Instruction
manual.
2.
SELF-DIAGNOSIS DISPLAY
When problems occur while the unit is operating, the counter of the
viewfinder or LCD screen consists of an alphabet and 4-digit number,
which blinks at 3.2Hz. This 5-character display indicates the
“repaired by:”, “block” in which the problem occurred, and “detailed
code” of the problem.
Note:
The self-diagnosis display data will be kept even if the lithium battery (BT8601 of control switch block (ZM11600)) is removed.
1 1
3 1
C
Repaired by:
Refer to page 6.
Self-diagnosis Code Table.
Indicates the appropriate
step to be taken.
E.g.
31 ....Reload the tape.
32 ....Turn on power again.
Block
Detailed Code
Blinks at 3.2Hz
C : Corrected by customer
H : Corrected by dealer
E : Corrected by service
engineer
Viewfinder or LCD screen
C : 3 1 : 1 1
— 6 —
DCR-HC90/HC90E
3.
SELF-DIAGNOSIS CODE TABLE
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
Block
Function
0
4
2
1
2
2
3
1
3
1
3
1
3
1
3
1
3
1
3
1
3
1
3
1
3
1
3
2
3
2
3
2
3
2
3
2
3
2
3
2
3
2
3
2
3
2
Detailed
Code
0
0
0
0
0
0
1
0
1
1
2
0
2
1
2
2
2
3
2
4
3
0
4
0
4
2
1
0
1
1
2
0
2
1
2
2
2
3
2
4
3
0
4
0
4
2
Symptom/State
Non-standard battery is used.
Condensation.
Video head is dirty.
LOAD direction. Loading does not
complete within specified time
UNLOAD direction. Loading does not
complete within specified time
T reel side tape slacking when unloading.
Winding S reel fault when counting the
rest of tape.
T reel fault.
S reel fault.
T reel fault.
FG fault when starting capstan.
FG fault when starting drum.
FG fault during normal drum operations.
LOAD direction loading motor time-
out.
UNLOAD direction loading motor
time-out.
T reel side tape slacking when
unloading.
Winding S reel fault when counting the
rest of tape.
T reel fault.
S reel fault.
T reel fault.
FG fault when starting capstan.
FG fault when starting drum
FG fault during normal drum
operations
Self-diagnosis Code
Repaired b
y
:
Correction
Use the info LITHIUM battery.
Remove the cassette, and insert it again after one hour.
Clean with the optional cleaning cassette.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
Remove the battery or power cable, connect, and perform
operations from the beginning.
Note:
Add the sentence as follows.
If other codes are displayed, service is required.
Please send the set to a specialized center.
Page of 6
Display

Sony DCR-HC90 / DCR-HC90E (serv.man3) Service Manual ▷ Download

  • DOWNLOAD Sony DCR-HC90 / DCR-HC90E (serv.man3) Service Manual ↓ Size: 457.96 KB | Pages: 6 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony DCR-HC90 / DCR-HC90E (serv.man3) in PDF for free, which will help you to disassemble, recover, fix and repair Sony DCR-HC90 / DCR-HC90E (serv.man3) Movie. Information contained in Sony DCR-HC90 / DCR-HC90E (serv.man3) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.