Sony DCR-HC30 / DCR-HC30E (serv.man2) Service Manual ▷ View online
— 5 —
DCR-HC30/HC30E
ENGLISH
JAPANESE
ENGLISH
JAPANESE
— 6 —
DCR-HC30/HC30E
TABLE OF CONTENTS
1.
SERVICE NOTE
1-1.
SERVICE NOTE ····························································· 1-1
1.
NOTE FOR REPAIR ······················································· 1-1
2.
POWER SUPPLY DURING REPAIRS ·························· 1-2
3.
TO TAKE OUT A CASSETTE WHEN NOT EJECT
(FORCE EJECT) ····························································· 1-2
(FORCE EJECT) ····························································· 1-2
2.
DISASSEMBLY
2-1.
DISASSEMBLY ······························································ 2-1
2-2.
SERVICE POSITION ····················································· 2-3
2-3.
CIRCUIT BOARDS LOCATION ··································· 2-6
2-4.
FLEXIBLE BOARDS LOCATION ································ 2-7
HELP (List of caution points is shown here.)
3.
BLOCK DIAGRAMS
3-1.
OVERALL BLOCK DIAGRAM (1/4) ··························· 3-1
3-2.
OVERALL BLOCK DIAGRAM (2/4) ··························· 3-3
3-3.
OVERALL BLOCK DIAGRAM (3/4) ··························· 3-5
3-4.
OVERALL BLOCK DIAGRAM (4/4) ··························· 3-7
3-5.
POWER BLOCK DIAGRAM (1/3) ································ 3-9
3-6.
POWER BLOCK DIAGRAM (2/3) ······························ 3-11
4.
PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
SCHEMATIC DIAGRAMS
4-1.
FRAME SCHEMATIC DIAGRAM (1/2) ······················· 4-1
FRAME SCHEMATIC DIAGRAM (2/2) ······················· 4-3
FRAME SCHEMATIC DIAGRAM (2/2) ······················· 4-3
4-2.
SCHEMATIC DIAGRAMS
• CD-489 (CCD IMAGER)
SCHEMATIC DIAGRAM ······························ 4-7
• PD-213 (LCD RGB DRIVE, BACKLIGHT)
SCHEMATIC DIAGRAM ······························ 4-9
• CONTROL KEY BLOCK (SB6300)
SCHEMATIC DIAGRAM ······························ 4-9
• LB-095 (EVF RELAY)
SCHEMATIC DIAGRAM ···························· 4-11
• SE-141 (PITCH/YAW SENSOR AMP)
SCHEMATIC DIAGRAM ···························· 4-12
• JK-260 (JACK)
SCHEMATIC DIAGRAM ···························· 4-13
• FP-830 FLEXIBLE (BAT/DC IN)
SCHEMATIC DIAGRAM ···························· 4-14
• IR-051 (REMOTE COMMANDER RECEIVER,
MIC IN)
SCHEMATIC DIAGRAM ···························· 4-15
SCHEMATIC DIAGRAM ···························· 4-15
• MS-200 (MS CONNECTOR, INDICATOR)
SCHEMATIC DIAGRAM ···························· 4-15
• CONTROL KEY BLOCK (SS6300, CF6300)
SCHEMATIC DIAGRAM ···························· 4-17
• FP-836 (PANEL REVERSE)
SCHEMATIC DIAGRAM ···························· 4-18
Shematic diagram of the VC-351 board is not shown.
Pages from 4-19 to 4-56 are not shown.
Pages from 4-19 to 4-56 are not shown.
• FP-228/467/826 FLEXIBLE (S/T REEL SENSOR,
TAPE SENSOR)
SCHEMATIC DIAGRAM ···························· 4-57
SCHEMATIC DIAGRAM ···························· 4-57
4-3.
PRINTED WIRING BOARDS ····································· 4-61
• CD-489 (CCD IMAGER)
PRINTED WIRING BOARD ······················· 4-61
• IR-051 (REMOTE COMMANDER RECEIVER,
MIC IN)
PRINTED WIRING BOARD ······················· 4-61
PRINTED WIRING BOARD ······················· 4-61
• JK-260 (JACK)
PRINTED WIRING BOARD ······················· 4-63
• LB-095 (EVF RELAY)
PRINTED WIRING BOARD ······················· 4-65
• SE-141 (PITCH/YAW SENSOR AMP)
PRINTED WIRING BOARD ······················· 4-65
• PD-213 (LCD RGB DRIVE, BACKLIGHT)
PRINTED WIRING BOARD ······················· 4-67
• MS-200 (MS CONNECTOR, INDICATOR)
PRINTED WIRING BOARD ······················· 4-69
Printed wiring board of the VC-351 board is not shown.
Pages from 4-71 to 4-74 are not shown.
Pages from 4-71 to 4-74 are not shown.
• FP-228/467/826 FLEXIBLE BOARD
(S/T REEL SENSOR, TAPE SENSOR) ······· 4-75
4-4.
MOUNTED PARTS LOCATION ································· 4-77
Mounted parts location of the VC-351 board is not shown.
Pages from 4-79 to 4-80 are not shown.
Pages from 4-79 to 4-80 are not shown.
5.
REPAIR PARTS LIST
5-1.
EXPLODED VIEWS ······················································ 5-3
5-1-1. OVERALL SECTION ····················································· 5-3
5-1-2. CABINET (R) SECTION ··············································· 5-4
5-1-3. LCD SECTION ······························································· 5-5
5-1-4. BAT. EVF SECTION ······················································ 5-6
5-1-5. LENS SECTION ····························································· 5-7
5-1-6. CABINET (L) SECTION ················································ 5-8
5-1-7. OVERALL (MECHANISM DECK-Z200) ····················· 5-9
5-1-8. LS CHASSIS BLOCK ASSEMBLY ····························· 5-10
5-1-9. MECHANICAL CHASSIS BLOCK ASSEMBLY ······· 5-11
5-2.
5-1-2. CABINET (R) SECTION ··············································· 5-4
5-1-3. LCD SECTION ······························································· 5-5
5-1-4. BAT. EVF SECTION ······················································ 5-6
5-1-5. LENS SECTION ····························································· 5-7
5-1-6. CABINET (L) SECTION ················································ 5-8
5-1-7. OVERALL (MECHANISM DECK-Z200) ····················· 5-9
5-1-8. LS CHASSIS BLOCK ASSEMBLY ····························· 5-10
5-1-9. MECHANICAL CHASSIS BLOCK ASSEMBLY ······· 5-11
5-2.
ELECTRICAL PARTS LIST ········································ 5-14
Electrical parts list of the
VC-351 board is not shown.
Pages from 5-17 to 5-24 are not shown.
1-1
SECTION 1
SERVICE NOTE
DCR-HC30/HC30E
Make sure that the flat cable and flexible board are not cracked of
bent at the terminal.
Do not insert the cable insufficiently nor crookedly.
bent at the terminal.
Do not insert the cable insufficiently nor crookedly.
Cut and remove the part of gilt
which comes off at the point.
(Take care that there are
some pieces of gilt left inside)
which comes off at the point.
(Take care that there are
some pieces of gilt left inside)
When remove a connector, don't pull at wire of connector.
Be in danger of the snapping of a wire.
Be in danger of the snapping of a wire.
When installing a connector, don't press down at wire of connector.
Be in danger of the snapping of a wire.
Be in danger of the snapping of a wire.
1-1. SERVICE NOTE
1.
NOTE FOR REPAIR
ENGLISH
JAPANESE
ENGLISH
JAPANESE
1-2
DCR-HC30/HC30E
2.
POWER SUPPLY DURING REPAIRS
In this unit, about 10 seconds after power is supplied to the battery terminal using the regulated power supply (8.4V), the power is shut off so
that the unit cannot operate.
This following two methods are available to prevent this. Take note of which to use during repairs.
that the unit cannot operate.
This following two methods are available to prevent this. Take note of which to use during repairs.
Method 1.
Use the AC power adaptor.
Method 2.
Connect the servicing remote commander RM-95 (J-6082-053-B) to the LANC jack, and set the commander switch to the “ADJ” side.
3.
TO TAKE OUT A CASSETTE WHEN NOT EJECT (FORCE EJECT)
1
Remove the cabinet (R) section.
2
Remove the front panel block assembly.
3
Remove the BAT, EVF block assembly.
4
Remove the lens block assembly.
5
Remove the mechanism deck and the VC-351 board.
6
Open the VC-351 board.
7
Disconnect CN9102 (27P, 0.3mm) of VC-351 board.
8
Supply +4.5V from the DC power supply to the loading motor and unload with pressing the cassette compartment.
ENGLISH
JAPANESE
ENGLISH
JAPANESE
VC-351
CN9102
VC-351 board
DC power supply (+4.5Vdc)
Loading motor
Disconnect the flexible board from
CN9102 of VC-351 board.
CN9102 of VC-351 board.
Click on the first or last page to see other DCR-HC30 / DCR-HC30E (serv.man2) service manuals if exist.