Sony DCR-DVD404E / DCR-DVD405 / DCR-DVD405E / DCR-DVD805 / DCR-DVD805E (serv.man4) Service Manual ▷ View online
DCR-DVD404E/DVD405/DVD405E/DVD805/DVD805E_ADJ
6-26
4.
1C Page table
Note 1:
If reading/writing data on pages 1C, set data: 01 to page:
0, address: 10, and then select pages: C. By this data
setting, the pages 1C can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to“00”.
0, address: 10, and then select pages: C. By this data
setting, the pages 1C can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to“00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the C, 1C Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of C, 1C Page Data”)
the C, 1C Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of C, 1C Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to 6B
Fixed data-1 (Initialized data)
6C
Fixed data-2
6D to BE
Fixed data-1 (Initialized data)
BF
Fixed data-2
C0 to C3
Fixed data-1 (Initialized data)
C4
C5
Fixed data-2
C6
C7
Fixed data-1 (Initialized data)
C8
C9
CA
Fixed data-2
CB
CC
CD to D5
Fixed data-1 (Initialized data)
D6
Fixed data-2
D7 to E2
Fixed data-1 (Initialized data)
E3
E4
E5
Fixed data-2
E6
E7
E8 to EF
Fixed data-1 (Initialized data)
F0
Fixed data-2
F1 to FF
Fixed data-1 (Initialized data)
Address
Initial value
Remark
NTSC PAL
86
00
00
87
0C
0F
88
36
46
IC3401 adj.
89
F8
18
8A
20
21
8B to 98
Fixed data-1 (Initialized data)
99
85
8A
IC3401 adj.
9A to A0
Fixed data-1 (Initialized data)
A1
27
27
A2
27
27
IC3401 adj.
A3
27
27
A4 to E3
Fixed data-1 (Initialized data)
E4
Fixed data-2
E5 to F1
Fixed data-1 (Initialized data)
F2
Fixed data-2
F3 to FF
Fixed data-1 (Initialized data)
DCR-DVD404E/DVD405/DVD405E/DVD805/DVD805E_ADJ
6-27
1-3.
ADJUSTMENT PROGRAM
The DCR-DVD404E/DVD405/DVD405E/DVD805/DVD805E are
adjusted by the Automatic Adjustment Program. The Automatic
Adjustment Program enters automatically via the SeusCam the
adjustment operations that were formerly entered manually by the
adjustment remote commander (some items may be adjusted by
manual operation on the operation screen of the SeusCam).
adjusted by the Automatic Adjustment Program. The Automatic
Adjustment Program enters automatically via the SeusCam the
adjustment operations that were formerly entered manually by the
adjustment remote commander (some items may be adjusted by
manual operation on the operation screen of the SeusCam).
1.
Precautions When Using Automatic Adjustment Pro-
gram
gram
1) The Automatic Adjustment Program writes the adjustment re-
sults such as EVR data to the set through two-way communi-
cation with the camera via the SeusCam. Accordingly, the Au-
tomatic Adjustment Program must be used in the environment
where the SeusCam operates.
cation with the camera via the SeusCam. Accordingly, the Au-
tomatic Adjustment Program must be used in the environment
where the SeusCam operates.
2) The Automatic Adjustment Program cannot be used when the
SEUS (digital camera adjustment software) is running. Exit
the SEUS before using the Automatic Adjustment Program.
the SEUS before using the Automatic Adjustment Program.
3) The SeusCam must be already started on the PC when using
the Automatic Adjustment Program. With the SeusCam not
started, some adjustment items will take time in adjustment.
started, some adjustment items will take time in adjustment.
4) The program run time may vary depending on the environ-
ment of the personal computer used.
Note:
Before using the Automatic Adjustment Program, set the
following data using the adjustment remote commander.
1) Select page: 0, address: 01, and set data: 01.
2) Select page: A, address: 14, set data: 01, and press the
following data using the adjustment remote commander.
1) Select page: 0, address: 01, and set data: 01.
2) Select page: A, address: 14, set data: 01, and press the
PAUSE (Write) button.
These settings are released if the [END] button is clicked
on the Main Menu screen of the Automatic Adjustment Pro-
gram.
on the Main Menu screen of the Automatic Adjustment Pro-
gram.
2.
Start of Automatic Adjustment Program
Double-click the application file (DCR-DVD405 Series Auto-Adj
Ver_1.1r02.exe), and the Automatic Adjustment Program will start.
Ver_1.1r02.exe), and the Automatic Adjustment Program will start.
3.
Function of Each Button on Main Menu Screen
When the Automatic Adjustment Program started, the Main Menu
screen in Fig. 6-1-8 will appear. On this screen, select each adjust-
ment section.
screen in Fig. 6-1-8 will appear. On this screen, select each adjust-
ment section.
Fig. 6-1-8
1
[Connecting the Equipment] button
A connection diagram of the equipment is displayed.
A connection diagram of the equipment is displayed.
2
[VIDEO SYSTEM ADJUSTMENT] button
The “VIDEO SYSTEM ADJUSTMENT” screen appears.
The “VIDEO SYSTEM ADJUSTMENT” screen appears.
3
[CAMERA SYSTEM ADJUSTMENT] button
The “CAMERA SYSTEM ADJUSTMENT” screen appears.
The “CAMERA SYSTEM ADJUSTMENT” screen appears.
4
[LCD SYSTEM ADJUSTMENT] button
The “LCD SYSTEM ADJUSTMENT” screen appears.
The “LCD SYSTEM ADJUSTMENT” screen appears.
5
[AUDIO SYSTEM ADJUSTMENT] button
The “AUDIO SYSTEM ADJUSTMENT” screen appears.
The “AUDIO SYSTEM ADJUSTMENT” screen appears.
6
[Initializing of Flash Back Up] button
The “Initializing of Flash Back Up” screen appears.
The “Initializing of Flash Back Up” screen appears.
7
[END] button
The Automatic Adjustment Program finishes.
At this time, the data set by the adjustment remote commander
are released.
If the data are not released with the [END] button, release them
through the following procedure using the adjustment remote
commander.
1) Select page: 0, address: 01, and set data: 01.
2) Select page: A, address: 14, set data: 00, and press the
The Automatic Adjustment Program finishes.
At this time, the data set by the adjustment remote commander
are released.
If the data are not released with the [END] button, release them
through the following procedure using the adjustment remote
commander.
1) Select page: 0, address: 01, and set data: 01.
2) Select page: A, address: 14, set data: 00, and press the
PAUSE (Write) button.
3) Select page: 0, address: 01, and set data: 00.
8
This part indicates the version of Automatic Adjustment Pro-
gram.
gram.
7
4
3
2
1
5
6
8
Ver. 1.1 2008.03
DCR-DVD404E/DVD405/DVD405E/DVD805/DVD805E_ADJ
6-28
4.
Initializing of Flash Back Up
Click the [Initializing of Flash Back Up] button on the Main Menu
screen, and the “Initializing of Flash Back Up” screen in Fig. 6-1-
9 will appear.
screen, and the “Initializing of Flash Back Up” screen in Fig. 6-1-
9 will appear.
Fig. 6-1-9
[Initializing method]
1) Click the [Initializing Start] button.
2) The initialization finishes when the following message is dis-
1) Click the [Initializing Start] button.
2) The initialization finishes when the following message is dis-
played.
DCR-DVD404E/DVD405/DVD405E/DVD805/DVD805E_ADJ
6-29
1-4.
VIDEO SYSTEM ADJUSTMENTS
1.
Function of Each Button on Video System Adjust-
ment Screen
ment Screen
Click the
[VIDEO SYSTEM ADJUSTMENT] button on the Main Menu
screen, and the “VIDEO SYSTEM ADJUSTMENT” screen in Fig.
6-1-10 will appear.
6-1-10 will appear.
Fig. 6-1-10
1
[To Menu] button
The Main Menu screen comes back.
The Main Menu screen comes back.
2
[Preparation] button
Notes for adjustment or jigs used are displayed.
Notes for adjustment or jigs used are displayed.
3
[Start] button
“Video Adjustment” starts.
“Video Adjustment” starts.
4
[Release Data Setting] button
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the video adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
“white”.)
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the video adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
“white”.)
2.
Adjustment Items of VIDEO System Adjustment
The adjustment items of video system adjustment are as listed in
Table 6-1-2. The Automatic Adjustment Program executes the ad-
justment items if the VIDEO Adjustment Start button is clicked.
Table 6-1-2. The Automatic Adjustment Program executes the ad-
justment items if the VIDEO Adjustment Start button is clicked.
Button
Name
Adjustment
Measurement Point
Measuring
Instrument
Adjustment
Page
Adjustment
Address
(Note)
67.5MHz/54MHz
Origin Oscillation Check
Origin Oscillation Check
Frequency
counter
counter
IC3401 LINE OUT Y
Gain Adj.
Gain Adj.
Y signal terminal of S VIDEO plug of
A/V jack (75 ohm terminated)
A/V jack (75 ohm terminated)
Pin e; of CN1601 (CHCK)
on VC-427 board
on VC-427 board
Oscilloscope
0C
80
IC3401 LINE OUT
Chroma Gain Adj.
Chroma Gain Adj.
Chroma signal terminal of S VIDEO
plug of A/V jack (75 ohm terminated)
plug of A/V jack (75 ohm terminated)
Oscilloscope
0C
81, 82
S VIDEO OUT Y
Level Adj.
Level Adj.
Y signal terminal of S VIDEO plug of
A/V jack (75 ohm terminated)
A/V jack (75 ohm terminated)
Oscilloscope
0C
25
S VIDEO OUT
Chroma Level Adj.
Chroma Level Adj.
Chroma signal terminal of S VIDEO
plug of A/V jack (75 ohm terminated)
plug of A/V jack (75 ohm terminated)
–
–
–
–
–
–
Oscilloscope
0C
26, 27
IC3401 Adj.
0C
83 to 8A, 99,
A1 to A3
A1 to A3
VIDEO OUT Level
Check
Check
VIDEO terminal of A/V jack (75 ohm
terminated)
terminated)
Oscilloscope
VIDEO
Adjustment
Adjustment
Note:
The Automatic Adjustment Program does not support.
Table 6-1-2
4
3
2
1
Click on the first or last page to see other DCR-DVD404E / DCR-DVD405 / DCR-DVD405E / DCR-DVD805 / DCR-DVD805E (serv.man4) service manuals if exist.