DOWNLOAD Sony DCR-DVD403 / DCR-DVD403E / DCR-DVD803 / DCR-DVD803E Service Manual ↓ Size: 6.21 MB | Pages: 63 in PDF or view online for FREE

Model
DCR-DVD403 DCR-DVD403E DCR-DVD803 DCR-DVD803E
Pages
63
Size
6.21 MB
Type
PDF
Document
Service Manual
Brand
Device
Movie / LEVEL 3
File
dcr-dvd403-dcr-dvd403e-dcr-dvd803-dcr-dvd803e.pdf
Date

Sony DCR-DVD403 / DCR-DVD403E / DCR-DVD803 / DCR-DVD803E Service Manual ▷ View online

SERVICE MANUAL
LEVEL
 
3
Link
Link
Revision History
Revision History
Ver. 1.5  2007. 09
The information that is not described in this Service Manual is described
in the LEVEL 2 Service Manual.
When repairing, use this manual together with LEVEL 2 Service Manual.
Contents of LEVEL 2 Service Manual
1. SERVICE NOTE
2. DISASSEMBLY
3. BLOCK DIAGRAMS
4. PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
5. REPAIR PARTS LIST
6. ADJUSTMENTS
OVERALL, POWER
AV-094, CK-148, KY-085, PD-250, ST-118, SW-442 BOARD
FP-126, FP-128, FP-129, FP-130, FP-131, FP-132, FP-133, FP-135, FP-136,
FP-146, FP-211, FP-228, FP-232, FP-234 FLEXIBLE
CONTROL SWITCH BLOCK (PS13300, SB9000)
FLASH UNIT (ST13450), MOTOR UNIT
EXPLODED VIEWS
ELECTRICAL PARTS LIST
• For ADJUSTMENTS (SECTION 6), refer to SERVICE MANUAL, ADJ (9-876-867-51).
• For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL 1 (9-876-867-41). (EXCEPT J MODEL)
• Reference number search on printed wiring boards is available.
How to use
Acrobat Reader
How to use
Acrobat Reader
Sony EMCS Co.
2007I0800-1
  ©2007.09
Published by Kohda TEC
9-876-867-11
DCR-DVD403/DVD403E/
DVD803/DVD803E
RMT-835
DCR-DVD403/DVD403E/DVD803/DVD803E
PRINTED WIRING BOARDS
REPAIR PARTS LIST
SCHEMATIC DIAGRAMS
PRINTED WIRING BOARDS
REPAIR PARTS LIST
SCHEMATIC DIAGRAMS
DIGITAL VIDEO CAMERA RECORDER
Photo : DCR-DVD403E
DCR-DVD403
US Model
Canadian Model
Japanese Model
DCR-DVD403E
AEP Model
UK Model
North European Model
DCR-DVD803E
Australian Model
Hong Kong Model
Chinese Model
DCR-DVD803
Korea Model
DCR-DVD403/DVD803/
DVD803E
E Model
DCR-DVD803/DVD803E
Tourist Model
— 2 —
DCR-DVD403/DVD403E/DVD803/DVD803E
1.
Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
 : LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40
°
C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
°
C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH
MARK 
0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CAUTION :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
ENGLISH
JAPANESE
ENGLISH
JAPANESE
CAUTION
Use of controls or adjustments or performance 
procedures other than those specified herein may 
result in hazardous radiation exposure.
• Abbreviation
CND : Canadian model
NE
: North European model
AUS : Australian model
HK
: Hong Kong model
KR
: Korea model
JE
: Tourist model
DCR-DVD403E
AEP, UK, NE
PAL
DCR-DVD803
E, KR, JE
NTSC
DCR-DVD403
US, CND ,E
NTSC
Table for difference of function
Model
Destination
Color System
DCR-DVD803
E, HK, AUS, JE
PAL
WARNING!!
WHEN  SERVICING,  DO  NOT  APPROACH  THE  LASER
EXIT  WITH  THE  EYE  TOO  CLOSELY.  IN  CASE  IT  IS
NECESSARY  TO  CONFIRM  LASER  BEAM  EMISSION,
BE  SURE  TO  OBSERVE  FROM  A  DISTANCE  OF MORE
THAN   30  cm  FROM  THE  SURFACE  OF  THE
OBJECTIVE  LENS  ON  THE  OPTICAL  PICK-UP  BLOCK.
CAUTION:
The use of optical instrument with this product will increase eye
hazard.
— 3 —
DCR-DVD403/DVD403E/DVD803/DVD803E
ENGLISH
JAPANESE
ENGLISH
JAPANESE
— 4 —
DCR-DVD403/DVD403E/DVD803/DVD803E
TABLE OF CONTENTS
4.
PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
4-1.
SCHEMATIC DIAGRAMS
• CD-565 (CCD IMAGER, TG, PITCH/YAW SENSOR
AMP)
SCHEMATIC DIAGRAM ···························· 4-21
• MA-439 (MIC AMP)
SCHEMATIC DIAGRAM ···························· 4-23
• VF-168 (EVF DRIVER)
SCHEMATIC DIAGRAM ···························· 4-25
• MD-114 (1/8) (BATTERY IN, CHARGE)
SCHEMATIC DIAGRAM ···························· 4-27
• MD-114 (2/8) (DC/DC CONVERTER)
SCHEMATIC DIAGRAM ···························· 4-29
• MD-114 (3/8) (HI CONTROL)
SCHEMATIC DIAGRAM ···························· 4-31
• MD-114 (4/8) (REC/PB RF AMP)
SCHEMATIC DIAGRAM ···························· 4-33
• MD-114 (5/8) (DSP, SHOCK SENSOR AMP, SDRAM)
SCHEMATIC DIAGRAM ···························· 4-35
• MD-114 (6/8) (MECHA CONTROL CPU, 16MBIT
FLASH MEMORY)
SCHEMATIC DIAGRAM ···························· 4-37
• MD-114 (7/8) (MECHA DRIVE)
SCHEMATIC DIAGRAM ···························· 4-39
• MD-114 (8/8) (CONNECTOR)
SCHEMATIC DIAGRAM ···························· 4-41
• VC-397 (1/13) (A/D CONVERTER)
SCHEMATIC DIAGRAM ···························· 4-43
• VC-397 (2/13) (LENS MOTOR DRIVE)
SCHEMATIC DIAGRAM ···························· 4-45
• VC-397 (3/13) (CAMERA PROCESS, SDRAM)
SCHEMATIC DIAGRAM ···························· 4-47
• VC-397 (4/13) (CAMERA CONTROL)
SCHEMATIC DIAGRAM ···························· 4-49
• VC-397 (5/13) (VIDEO/AUDIO SIGNAL PROCESSOR)
SCHEMATIC DIAGRAM ···························· 4-51
• VC-397 (6/13) (VIDEO & AUDIO I/O, A/D CONV. &
 D/A CONV.)
SCHEMATIC DIAGRAM ···························· 4-53
• VC-397 (7/13) (DVD SYSTEM CONTROL)
SCHEMATIC DIAGRAM ···························· 4-55
• VC-397 (8/13) (FLASH MEMORY, SDRAM)
SCHEMATIC DIAGRAM ···························· 4-57
• VC-397 (9/13) (16:9 WIDE PROCESS)
SCHEMATIC DIAGRAM ···························· 4-59
• VC-397 (10/13) (AUDIO DSP)
SCHEMATIC DIAGRAM ···························· 4-61
• VC-397 (11/13) (MIC AMP)
SCHEMATIC DIAGRAM ···························· 4-63
• VC-397 (12/13) (CONNECTOR-1)
SCHEMATIC DIAGRAM ···························· 4-65
• VC-397 (13/13) (CONNECTOR-2)
SCHEMATIC DIAGRAM ···························· 4-67
4-2.
PRINTED WIRING BOARDS
• CD-565 (CCD IMAGER, TG, PITCH/YAW SENSOR
AMP)
PRINTED WIRING BOARD ······················· 4-83
• MA-439 (MIC AMP)
PRINTED WIRING BOARD ······················· 4-87
• VF-168 (EVF DRIVER)
PRINTED WIRING BOARD ······················· 4-87
• MD-114 (BATTERY IN, CHARGE, DC/DC
CONVERTER, HI CONTROL, REC/PB RF AMP, DSP,
SHOCK SENSOR AMP, SDRAM, MECHA CONTROL
CPU, 16MBIT FLASH MEMORY, MECHA DRIVE
CONNECTOR)
PRINTED WIRING BOARD ······················· 4-89
• VC-397 (A/D CONVERTER, LENS MOTOR DRIVE,
CAMERA PROCESS, SDRAM, CAMERA CONTROL,
VIDEO/AUDIO SIGNAL PROCESSOR, VIDEO &
AUDIO I/O, A/D CONV. & D/A CONV., DVD SYSTEM
CONTROL, FLASH MEMORY, SDRAM, 16:9 WIDE
PROCESS, AUDIO DSP, MIC AMP, CONNECTOR-1,
CONNECTOR-2)
PRINTED WIRING BOARD ······················· 4-93
4-3.
WAVEFORMS ······························································ 4-98
4-4.
MOUNTED PARTS LOCATION ······························· 4-101
5.
REPAIR PARTS LIST
5-2.
ELECTRICAL PARTS LIST ········································ 5-17
Page of 63
Display

Sony DCR-DVD403 / DCR-DVD403E / DCR-DVD803 / DCR-DVD803E Service Manual ▷ Download

  • DOWNLOAD Sony DCR-DVD403 / DCR-DVD403E / DCR-DVD803 / DCR-DVD803E Service Manual ↓ Size: 6.21 MB | Pages: 63 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony DCR-DVD403 / DCR-DVD403E / DCR-DVD803 / DCR-DVD803E in PDF for free, which will help you to disassemble, recover, fix and repair Sony DCR-DVD403 / DCR-DVD403E / DCR-DVD803 / DCR-DVD803E Movie. Information contained in Sony DCR-DVD403 / DCR-DVD403E / DCR-DVD803 / DCR-DVD803E Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.