Sony DCR-DVD205 / DCR-DVD205E / DCR-DVD304E / DCR-DVD305 / DCR-DVD305E / DCR-DVD705 / DCR-DVD705E / DCR-DVD755 / DCR-DVD755E (serv.man4) Service Manual ▷ View online
SECTION 6
ADJUSTMENTS
Revision History
Revision History
Ver. 1.1 2008.03
Link
Link
Sony EMCS Co.
2008C0500-1
© 2008.03
Published by Kohda TEC
9-876-925-52
RMT-835
Auto-ADJ
• Use this Service Manual together with the Automatic Adjustment Program (DCR-DVD205 Series Auto-Adj
Ver_1.1r02.exe) and the AUDIT (Drive Adjustment Program).
LCD/EVF SYSTEM ADJUSTMENTS
CAMERA SYSTEM ADJUSTMENTS
PREPARATIONS BEFORE ADJUSTMENTS
CAMERA SECTION ADJUSTMENTS
VIDEO SYSTEM ADJUSTMENTS
ADJUSTMENT PROGRAM
AUDIO SYSTEM ADJUSTMENTS
ERROR
INITIALIZATION OF 9, A, B, C, D, E, F, 13, 14,
15, 17, 19, 1A, 1B, 1C, 1E, 1F PAGE DATA
15, 17, 19, 1A, 1B, 1C, 1E, 1F PAGE DATA
POWER ADJUSTMENT
DIAGNOSIS
DVD+RW ADJUSTMENT
DVD-RW ADJUSTMENT
TROUBLESHOOTING
DVD-R ADJUSTMENT
AUDIT (Drive Adjustment Program)
PREPARATIONS BEFORE ADJUSTMENTS
DRIVE SECTION ADJUSTMENTS
ADJUSTMENT REMOTE COMMANDER
(NEW LANC JIG)
(NEW LANC JIG)
ADJUSTMENT REMOTE COMMANDER (RM-95)
APPLICATION FOR ADJUSTMENT (SeusCam)
SERVICE MODE
DATA PROCESS
SERVICE MODE
DCR-DVD205/DVD205E/DVD304E/DVD305/DVD305E/
DVD705/DVD705E/DVD755/DVD755E
DCR-DVD205/DVD205E/DVD304E/DVD305/
DVD305E/DVD705/DVD705E/DVD755/DVD755E_ADJ
DVD305E/DVD705/DVD705E/DVD755/DVD755E_ADJ
Adjusting items when replacing main parts and boards
List of service tools
Install
Before starting adjustments
• Precaution on Replacing the VC-423 board
— 2 —
DCR-DVD205/DVD205E/DVD304E/DVD305/
DVD305E/DVD705/DVD705E/DVD755/DVD755E_ADJ
DVD305E/DVD705/DVD705E/DVD755/DVD755E_ADJ
WARNING!!
WHEN SERVICING, DO NOT APPROACH THE LASER
EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS
NECESSARY TO CONFIRM LASER BEAM EMISSION,
BE SURE TO OBSERVE FROM A DISTANCE OF MORE
THAN 30 cm FROM THE SURFACE OF THE
OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.
EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS
NECESSARY TO CONFIRM LASER BEAM EMISSION,
BE SURE TO OBSERVE FROM A DISTANCE OF MORE
THAN 30 cm FROM THE SURFACE OF THE
OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.
CAUTION:
The use of optical instrument with this product will increase eye
hazard.
hazard.
CAUTION :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
CAUTION
Use of controls or adjustments or perfor mance
procedures other than those specified herein may
result in hazardous radiation exposure.
Use of controls or adjustments or perfor mance
procedures other than those specified herein may
result in hazardous radiation exposure.
Optical sensor disc (J-6082-570-A)
CAUTION
In the process of adjusting optical power,
CLASS1M laser optical radiates. so do not
remove this sensor disk.
CLASS1M laser optical radiates. so do not
remove this sensor disk.
— 3 —
DCR-DVD205/DVD205E/DVD304E/DVD305/
DVD305E/DVD705/DVD705E/DVD755/DVD755E_ADJ
DVD305E/DVD705/DVD705E/DVD755/DVD755E_ADJ
TABLE OF CONTENTS
6.
ADJUSTMENTS
Before Starting Adjustments ····················································· 6-1
1-1.
1-1.
Adjusting Items when Replacing Main Parts and
Boards ·············································································· 6-3
Boards ·············································································· 6-3
1-2.
List of Service Tools ························································ 6-5
1-3.
Install ··············································································· 6-7
6-1.
Camera Section Adjustments ········································· 6-12
1-1.
Preparations before Adjustments
(CAMERA Section) ······················································ 6-12
(CAMERA Section) ······················································ 6-12
1-2.
Initialization of 9, A, B, C, D, E, F, 13, 14, 15, 17,
19, 1A, 1B, 1C, 1E, 1F Page Data ································· 6-14
19, 1A, 1B, 1C, 1E, 1F Page Data ································· 6-14
1-3.
Adjustment Program ······················································ 6-28
1-4.
Video System Adjustments ············································ 6-30
1-5.
Camera System Adjustments ········································· 6-34
1-6.
LCD/EVF System Adjustments ····································· 6-43
1-7.
Audio System Adjustments ··········································· 6-46
1-8.
Error ··············································································· 6-51
6-2.
Drive Section Adjustments ············································ 6-53
2-1.
Preparations before Adjustments (Drive Section) ········· 6-53
2-2.
AUDIT (Drive Adjustment Program) ···························· 6-56
2-3.
Diagnosis ······································································· 6-58
2-4.
Power Adjustment ························································· 6-60
2-5.
DVD-R Adjustment ······················································· 6-62
2-6.
DVD-RW Adjustment ··················································· 6-64
2-7.
DVD+RW Adjustment ··················································· 6-65
2-8.
Troubleshooting ····························································· 6-66
6-3.
Service Mode ································································· 6-75
3-1.
Adjustment Remote Commander (RM-95) ··················· 6-75
3-2.
Adjustment Remote Commander (New LANC Jig) ····· 6-76
3-3.
Application for Adjustment (SeusCam) ························ 6-77
3-4.
Data Process ·································································· 6-78
3-5.
Service Mode ································································· 6-79
Section
Title
Page
*
The color reproduction frame is shown on page 6-85
6-1
DCR-DVD205/DVD205E/DVD304E/DVD305/
DVD305E/DVD705/DVD705E/DVD755/DVD755E_ADJ
DVD305E/DVD705/DVD705E/DVD755/DVD755E_ADJ
SECTION 6
ADJUSTMENTS
1.
Before starting adjustments
EVR Data Re-writing Procedure When Replacing Board
The data that is stored in the repair board, is not necessarily correct.
Perform either procedure 1 or procedure 2 or procedure 3 when replacing board.
Procedure 1
Save the EVR data of the machine in which a board is going to be replaced. Download the saved data after a
board is replaced.
board is replaced.
Remove the EEPROM and install it.
(Former board)
(New board)
Procedure 2
Remove the EEPROM from the board of the machine that is going to be repaired. Install the removed
EEPROM to the replaced board.
EEPROM to the replaced board.
Procedure 3
When the data cannot be saved due to defective EEPROM, or when the EEPROM cannot be removed or
installed, save the data from the same model of the same destination, and download it.
installed, save the data from the same model of the same destination, and download it.
After the EVR data is saved and downloaded, check the
respective items of the EVR data.
(Refer to page 6-4 for the items to be checked)
respective items of the EVR data.
(Refer to page 6-4 for the items to be checked)
(Machine before starting repair)
(Machine after a board is replaced)
PC
PC
Save the EVR data
to a personal computer.
to a personal computer.
Download the saved
data to a machine.
data to a machine.
(Machine to be repaired)
(Machine to be repaired)
(The same model of the same destination)
Save the data.
Download the data.
PC